October 19, 20187 yr New install, I made no changes to the XML file. When I click on web GUI , it takes me to the unraid GUI. I need more information than that to help you. New install or upgrade?Sent from my PH-1 using Tapatalk
October 19, 20187 yr 3 minutes ago, sg14_96 said: New install, I made no changes to the XML file. When I click on web GUI , it takes me to the unraid GUI. This is the same exact thing that I am stuck on. New install, no changes, and the web GUI from docker takes me to unraid GUI. And I can't get there by going to port 80. Edited October 19, 20187 yr by johnzimm
October 19, 20187 yr I tried changing the port numbers around, but the don't save after my edits. This is the same exact thing that I am stuck on. New install, no changes and web GUI from docker takes me to unraid GUI. And I cant tget there by going to port 80.Sent from my PH-1 using Tapatalk
October 19, 20187 yr when i select webgui i get taken to the following address IP Address:8080/zm/index.php
October 19, 20187 yr Author 4 hours ago, mgranger said: when i select webgui i get taken to the following address IP Address:8080/zm/index.php That is correct.
October 19, 20187 yr Author 4 hours ago, sg14_96 said: I tried changing the port numbers around, but the don't save after my edits. Sent from my PH-1 using Tapatalk The default port is 8080. Take a screen shot of the ip and port settings when installing the ZoneMinder docker. Post it so I can see what you are setting.
October 20, 20187 yr 5 hours ago, mgranger said: I will start to follow this then. Thanks for all the advice and help. Sorry to waste all your time though Well if that's your problem I hope they get that fixed. They look like nice cameras. My system is built on regular desktop gaming hardware, and i know it would have a real hard time trying to process that 5MP video looking for motion. There's a 640x320 sub stream I would use for motion detection. Then link that camera to a high res stream from the same camera marked NoCord and link it. Works really well
October 20, 20187 yr When I click to go to the WebUI it still takes me to "http://192.168.1.2/zm". Even after I did a full install and deleted the XML file. I can not get to it via this either... (IP Address):8080/zm/index.php
October 20, 20187 yr Author 1 hour ago, johnzimm said: When I click to go to the WebUI it still takes me to "http://192.168.1.2/zm". Even after I did a full install and deleted the XML file. I can not get to it via this either... (IP Address):8080/zm/index.php Don't show advanced mode and show port mappings.
October 20, 20187 yr 2 hours ago, dlandon said: Don't show advanced mode and show port mappings. Port Mapping screen shot.
October 20, 20187 yr Author 40 minutes ago, johnzimm said: Port Mapping screen shot. That is all correct. Clicking on the WebUI should take you to IP:8080/zm/ Click the 'Show docker allocations...' and confirm no other dockers use port 8080.
October 20, 20187 yr 1 hour ago, dlandon said: Click the 'Show docker allocations...' and confirm no other dockers use port 8080. docker allocations...
October 20, 20187 yr Author 37 minutes ago, johnzimm said: docker allocations... Set Zoneminder network type to 'Bridge', not 'Host'.
October 21, 20187 yr 1 hour ago, dlandon said: 'Bridge', not 'Host'. Still can’t get to the webgui. But I can see that it running. My network and server are not hooked the the internet, is that a problem? Edited October 21, 20187 yr by johnzimm
October 21, 20187 yr Author 10 hours ago, johnzimm said: Still can’t get to the webgui. But I can see that it running. My network and server are not hooked the the internet, is that a problem? Your port mappings need to look like this: These are the defaults. Be sure there are no other dockers trying to use these ports. If this is still not working, post your diagnostics.
October 21, 20187 yr 9 hours ago, dlandon said: If this is still not working, post your diagnostics. Here you go. Thanks so much, by the way, for continuing to help. tower-diagnostics-20181021-1708.zip
October 21, 20187 yr Author 1 hour ago, johnzimm said: Here you go. Thanks so much, by the way, for continuing to help. tower-diagnostics-20181021-1708.zip Get connected to the Internet and solve the issues in FCP (Fix Common Problems). You have an issue with the cache drive and need to solve it, along with other issues.
October 22, 20187 yr 23 hours ago, dlandon said: Get connected to the Internet and solve the issues in FCP (Fix Common Problems). Thank you, I did the following after connecting to the internet: Deleted Zoneminder share Deleted Zoneminder folder in appdata Ran Safe Permissions Ran Update OS Ran Update dockers Ran CA Cleanup Appdata Started Mover Ran Fix Common Problems Ran Parity Check And did a server restart And Now it works! Thanks again for the help. Edited October 22, 20187 yr by johnzimm
October 24, 20187 yr Author On 10/19/2018 at 2:13 PM, mgranger said: I will start to follow this then. Thanks for all the advice and help. Sorry to waste all your time though I have something for you to try. Turn off zmaudit in the options. Is your appdata/Zoneminder folder on an SSD?
October 24, 20187 yr 2 hours ago, dlandon said: Is your appdata/Zoneminder folder on an SSD? If I may jump in. My appdata is on the cache drive which is on an SSD drive. Is that a problem? I do notice that the these both are listed as unprotected. Edited October 24, 20187 yr by johnzimm
October 24, 20187 yr Author 1 hour ago, johnzimm said: If I may jump in. My appdata is on the cache drive which is on an SSD drive. Is that a problem? I do notice that the these both are listed as unprotected. No. That is actually preferred over a hard drive.
October 24, 20187 yr I saw this somewhere so I have Run_Audit off. I do have appdata/Zoneminder on an SSD
October 24, 20187 yr Author I've updated the docker to run zmaudit once a week. Turn off RUN_AUDIT in the options and restart Zoneminder. Zmaudit has been known to take up too much processor time and does not need to run continuously.
October 24, 20187 yr 2 hours ago, dlandon said: I've updated the docker to run zmaudit once a week. Turn off RUN_AUDIT in the options and restart Zoneminder. Zmaudit has been known to take up too much processor time and does not need to run continuously. I have had this off for awhile now and over the past couple of days it has seemed to be more stable however once in awhile i notice it has some trouble (I have not yet tried to increase the resolution or add the color back which i may do here in the next couple of days)
October 24, 20187 yr Author 1 hour ago, mgranger said: I have had this off for awhile now and over the past couple of days it has seemed to be more stable however once in awhile i notice it has some trouble (I have not yet tried to increase the resolution or add the color back which i may do here in the next couple of days) The latest version of the docker will run zmaudt once a week because of reports of zmaudit loading the processor. I would try to put back your settings slowly and see which ones are really affecting you. I'll keep trying to find more things to try.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.