Mushin Posted March 18, 2020 Share Posted March 18, 2020 4 hours ago, Squid said: You're accessing your server via https. Using a custom tab that accesses via http will result in that as its a security violation enforced via browsers. You can set it to New Tab to get around that. Thanks for the info. How can I set it to open a new tab? Quote Link to comment
Squid Posted March 18, 2020 Author Share Posted March 18, 2020 Hit the dropdown within the plugin's settings. Quote Link to comment
Mushin Posted March 18, 2020 Share Posted March 18, 2020 3 minutes ago, Squid said: Hit the dropdown within the plugin's settings. Ah, thanks. I couldn't see the dropdown arrow as I'm using a dark mode extension for Chrome and it must have messed up the colours. Quote Link to comment
Fabiolander Posted March 31, 2020 Share Posted March 31, 2020 Hi, Thanks a lot for this plugin. I think I have the same blanck page problem as some others who try to add http tab when the unray server is accessed by https. So I started by creating a new tab for Sabnzb, I added a new port in the Sabnzb container then I mapped this new port to https access in the Sabnzb configuration. now it works. 🤘 My question is : Should I do the same for all others container applications ? because I have no clue how to do in plex or krusader... Do you have maybe an easier workaround ? Thanks a lot and take care Fab Quote Link to comment
piyper Posted April 16, 2020 Share Posted April 16, 2020 Firstly, cool plugin, well done. My apologies if this has been already asked and I did look at the link on the tab and noticed it was using a JS function, so my example below would not work, but you get the idea. It would be really cool if you could set the link target (IE <a href="..." target="plex">) so that when you choose the "open in new tab" option, it would use the tab/window you already have open from the last time you clicked the link, instead of opening a new window every time you click the link. Thank you in advance for your consideration. Quote Link to comment
JasonK Posted June 28, 2020 Share Posted June 28, 2020 Hey Squid...I'm trying to have a custom tab point to my grafana dash. Server is NOT accessed via HTTPS. I add the tab, have it go to the URL, save, when I try to go I get this: This is the URL in question: http://<serverip>:3000/d/000000001/unraid-system-dashboard?orgId=1&refresh=30s Works fine when put into a browser tab on any browser on my system. Any thoughts? Quote Link to comment
Squid Posted June 28, 2020 Author Share Posted June 28, 2020 I would just go with http://<serverip>:3000 and then see if that works Quote Link to comment
JasonK Posted June 28, 2020 Share Posted June 28, 2020 27 minutes ago, Squid said: I would just go with http://<serverip>:3000 and then see if that works Just tried that: Get the same white box. Quote Link to comment
JasonK Posted June 29, 2020 Share Posted June 29, 2020 18 hours ago, Squid said: I would just go with http://<serverip>:3000 and then see if that works Getting the same type of thing when using a URL to my SABnzbd docker (http://192.168.0.19/SABnzbd) But it's working properly with my Medusa docker (http://192.168.0.19/Medusa) Quote Link to comment
Squid Posted June 29, 2020 Author Share Posted June 29, 2020 Has to have something to do with the reverse proxy you're using. Not able to help with that unfortunately. Quote Link to comment
JasonK Posted June 29, 2020 Share Posted June 29, 2020 1 hour ago, Squid said: Has to have something to do with the reverse proxy you're using. Not able to help with that unfortunately. im not using a reverse proxy. this is all internal traffic only Quote Link to comment
Squid Posted June 29, 2020 Author Share Posted June 29, 2020 7 hours ago, JasonK said: http://192.168.0.19/SABnzbd You're doing something, because that is not a URL to the stock SabNZBD You would normally specify a port. Quote Link to comment
JasonK Posted June 29, 2020 Share Posted June 29, 2020 48 minutes ago, Squid said: You're doing something, because that is not a URL to the stock SabNZBD You would normally specify a port. Apologies - I just right clicked on the link in the bar in the dash. Here's the config from the plugin showing there's a port (medusa also has a port as you see and it works - which is working as mentioned earlier): Quote Link to comment
JasonK Posted June 30, 2020 Share Posted June 30, 2020 12 hours ago, JasonK said: Apologies - I just right clicked on the link in the bar in the dash. Here's the config from the plugin showing there's a port (medusa also has a port as you see and it works - which is working as mentioned earlier): Quick note - the 192.168.0.65 is an internal IP on my network - and is actually a VM running on unraid - could it be some weird networking issue within unraid preventing it from communicating? 0.19 is the ip of the server. The server does have a default gateway set to 0.1 (my router)...hmmm.... I can get to it without issue from other computers, my phone, etc, all on the same network. Quote Link to comment
Squid Posted June 30, 2020 Author Share Posted June 30, 2020 Probably you're getting nailed by a cross-site security provision enforced by the browsers which won't allow scripts from one domain to be executed on another. Depends upon how the remote site is actually programmed as to whether this trips the blocking. Quote Link to comment
DougCube Posted October 15, 2020 Share Posted October 15, 2020 On my server, I have two NICs, each set to a different IP. Is there a way I can have the URLs setup so that it uses which ever IP it's currently under? Like a relative address instead of an absolute address if that makes sense. (The reason I'm needing this is because sometimes one connection goes down and I need to use the other.) Quote Link to comment
Meldrak Posted November 15, 2020 Share Posted November 15, 2020 Hi, It does not work for URL with credentials, page is showing but can't login to my server I think its a normal behavior ? or is there any tips for that ? I do not want to set my server passwordless Quote Link to comment
Meldrak Posted November 16, 2020 Share Posted November 16, 2020 On 11/15/2020 at 11:13 AM, Meldrak said: Hi, It does not work for URL with credentials, page is showing but can't login to my server I think its a normal behavior ? or is there any tips for that ? I do not want to set my server passwordless It's a web browser issue !! Works fine with Firefox not with Edge Quote Link to comment
sonic6 Posted December 17, 2020 Share Posted December 17, 2020 hi, i've got a problem, when i shrink the browser windows. the buttons on the right disappears, while i am using custom tabs Quote Link to comment
Squid Posted December 17, 2020 Author Share Posted December 17, 2020 Expected behaviour, and built into the OS itself. If there isn't space for them, it won't display them 1 Quote Link to comment
sonic6 Posted December 17, 2020 Share Posted December 17, 2020 if i delete all custom tabs, i can shrink the window and all icon are still displayed. maybe there is a way that custom tabs are like the "normal" unraid tabs? Quote Link to comment
Squid Posted December 17, 2020 Author Share Posted December 17, 2020 They are normal unraid tabs. The behaviour is from the buttons. If there isn't room the OS won't display them. You can gain more space by not displaying the array usage bar. 1 Quote Link to comment
JhonScript Posted July 2, 2021 Share Posted July 2, 2021 On 1/19/2019 at 7:04 AM, SpaceInvaderOne said: It would be awesome to be able to have a custom tab that runs a user script. Hello, I do not see in the four pages if this has already been resolved so the question arises: How can I do this? Quote Link to comment
SamHill Posted July 10, 2021 Share Posted July 10, 2021 (edited) Are we able to have a custom tab open within unraid? It would nice to have SabNZBD run within unraid, keeping unraids menu on top. Nevermind. Just figured it out. Edited July 10, 2021 by SamHill Quote Link to comment
JasonK Posted August 5, 2021 Share Posted August 5, 2021 On 7/10/2021 at 1:33 PM, SamHill said: Are we able to have a custom tab open within unraid? It would nice to have SabNZBD run within unraid, keeping unraids menu on top. Nevermind. Just figured it out. You were able to get a CustomTab to show SabNZBDs window properly inside the tab? What did you do to make that work? Could you show a screencap of your customtab settings for it? Thanks! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.