On 2/4/2025 at 5:50 PM, CorneliousJD said:

Just switched to using this container today - however the mouse in the webVNC viewer doesn't seem to be working? I cannot click on anything, but if I connect via RealVNC client it does work? 

 

It should definitely work... Did you try with another browser or in a private/incognito window ?

16 hours ago, Djoss said:

 

It should definitely work... Did you try with another browser or in a private/incognito window ?

Well would you look at that. It works via incognito, and via Firefox. Strange!

I then cleared cookies on 10.0.0.10 (local unraid IP) and now it's working normally via Chrome.

 

Thank you  

 

I installed the Docker for JD and it worked fine so far. Today I started the docker again and received this message. Any ideas what could caused this?

 

The log file:

 

Feb 26 19:52:04 Tower kernel: docker0: port 1(vethebe0b35) entered disabled state
Feb 26 19:52:04 Tower kernel: veth04293dc: renamed from eth0
Feb 26 19:52:04 Tower kernel: docker0: port 1(vethebe0b35) entered disabled state
Feb 26 19:52:04 Tower kernel: vethebe0b35 (unregistering): left allmulticast mode
Feb 26 19:52:04 Tower kernel: vethebe0b35 (unregistering): left promiscuous mode
Feb 26 19:52:04 Tower kernel: docker0: port 1(vethebe0b35) entered disabled state
Feb 26 19:52:04 Tower kernel: docker0: port 1(veth4c035e9) entered blocking state
Feb 26 19:52:04 Tower kernel: docker0: port 1(veth4c035e9) entered disabled state
Feb 26 19:52:04 Tower kernel: veth4c035e9: entered allmulticast mode
Feb 26 19:52:04 Tower kernel: veth4c035e9: entered promiscuous mode
Feb 26 19:52:04 Tower kernel: docker0: port 1(veth4c035e9) entered blocking state
Feb 26 19:52:04 Tower kernel: docker0: port 1(veth4c035e9) entered forwarding state
Feb 26 19:52:05 Tower kernel: eth0: renamed from vetha33ecee

 

4 minutes ago, shire said:

I installed the Docker for JD and it worked fine so far. Today I started the docker again and received this message. Any ideas what could caused this?

 

The log file:

 

Feb 26 19:52:04 Tower kernel: docker0: port 1(vethebe0b35) entered disabled state
Feb 26 19:52:04 Tower kernel: veth04293dc: renamed from eth0
Feb 26 19:52:04 Tower kernel: docker0: port 1(vethebe0b35) entered disabled state
Feb 26 19:52:04 Tower kernel: vethebe0b35 (unregistering): left allmulticast mode
Feb 26 19:52:04 Tower kernel: vethebe0b35 (unregistering): left promiscuous mode
Feb 26 19:52:04 Tower kernel: docker0: port 1(vethebe0b35) entered disabled state
Feb 26 19:52:04 Tower kernel: docker0: port 1(veth4c035e9) entered blocking state
Feb 26 19:52:04 Tower kernel: docker0: port 1(veth4c035e9) entered disabled state
Feb 26 19:52:04 Tower kernel: veth4c035e9: entered allmulticast mode
Feb 26 19:52:04 Tower kernel: veth4c035e9: entered promiscuous mode
Feb 26 19:52:04 Tower kernel: docker0: port 1(veth4c035e9) entered blocking state
Feb 26 19:52:04 Tower kernel: docker0: port 1(veth4c035e9) entered forwarding state
Feb 26 19:52:05 Tower kernel: eth0: renamed from vetha33ecee

 

 

This is usually caused by a browser plugin/extension.

22 hours ago, Djoss said:

 

This is usually caused by a browser plugin/extension.

 

Seems to be an issues with Safari. Works great in Chrome.

Edited February 27, 20251 yr by shire

So far I understand, there are only community generated dark mode templates available for JD. 

 

For example:

 

https://github.com/Vinylwalk3r/JDownloader-2-Dark-Theme

 

What template will be loaded when setting this to '1'?

 

I like it and I would also use it with my other local installation...

 

7 minutes ago, shire said:

 

Seems to be an issues with Safari. Works great in Chrome.

 

Then check extensions installed/activated in Safari. One of them is probably causing the issue.

2 minutes ago, shire said:

So far I understand, there are only community generated dark mode templates available for JD. 

 

For example:

 

https://github.com/Vinylwalk3r/JDownloader-2-Dark-Theme

 

What template will be loaded when setting this to '1'?

 

I like it and I would also use it with my other local installation...

 

 

This is the dark theme used: https://draculatheme.com/jdownloader2

On 2/27/2025 at 6:49 PM, Djoss said:

 

Then check extensions installed/activated in Safari. One of them is probably causing the issue.

 

It was the Bitwarden Plugin. I deleted the cache for the plugin in Safari and the error is gone. I think there is not much anyone can do about this. I just leave it here for anybody who has the same issue...

Getting the error over and over again.  havent changed anything... any ideas?

 

On 3/19/2025 at 10:26 PM, knights_of_pine said:

Getting the error over and over again.  havent changed anything... any ideas?

 

Looks like something else on your system is using the same port. Are you using the default container settings ?

Edited March 23, 20251 yr by Djoss

i did not change it. i try to reach it on 5800. i am passing it through to binhex deluge VPN. i haven't had this issue before though which is weird?

On 3/20/2025 at 9:53 AM, knights_of_pine said:

i did not change it. i try to reach it on 5800. i am passing it through to binhex deluge VPN. i haven't had this issue before though which is weird?

I don't have enough details to explain the reason... did you find another container that could use the same port ?

14 hours ago, Djoss said:

I don't have enough details to explain the reason... did you find another container that could use the same port ?

another container is on 5800 and i can reach it fine.  i passed the jdownloader through to deluge vpn and have the port mapped from 5800 to 5801 in that container... i do this exact same thing for another container, but it isnt working with this one...

9 hours ago, knights_of_pine said:

another container is on 5800 and i can reach it fine.  i passed the jdownloader through to deluge vpn and have the port mapped from 5800 to 5801 in that container... i do this exact same thing for another container, but it isnt working with this one...

 

I just realized from log you provided that it's port 5900 that is conflicting. If I understood your setup correctly, you are not using the default bridge network, so you probably need to change the "VNC Listening Port (Non-Bridge Network Type)" setting (it can be set to -1 if not needed).

How does this handle Capcha authenication? In the local windows version, a browser window will pop up for Capcha.

Thank You

Noticing that suddenly it’s taking forever to connect or just not connecting when i launch the web gui. Ideas?

edit: seems fine on my macbook, problem is only on my iphone

Edited November 4, 2025Nov 4 by pleasehelpmeguys

is there a way to run this container ower a wiregurad connection tried but failed to run because port publising any tips will be appreciated

1 hour ago, kjoe07 said:

is there a way to run this container ower a wiregurad connection tried but failed to run because port publising any tips will be appreciated

How you did your setup and what was the failure exactly ?

6 hours ago, Djoss said:

How you did your setup and what was the failure exactly ?

i've reinstalled now is working but can access the GUI i set the network type to container on the web and seelct binhex-gluetun container added port 5800 but the gui is just loagin .... no way to access

Hi - I've been tangling with trying to use JDownloader2 and your MakeMKV container, routing them both through gluetun, and hoping someone can help. I've tried to find a good solution by reading different posts but just can't seem to get the right combination of things to work. This is all a port related issue and I feel like I'm missing something really simple.

Both JDownloader and MakeMKV use 5800 to access the WebUI.

Originally, I had MakeMKV installed.

• In the Settings I set Network Type > Container and then Container Network > gluetun.

• In the Settings of Gluetun I just + Add extra port from whatever specific container I am running through it.

  • In the case for MakeMKV I just set the port to 5800 and 5900 for the WebGui and VNC.

Installing JDownloader that uses the same ports - I can't seem to get to access each container through the WebUI. I'm not sure which specific ports I need to change (likely for Jdownloader) and where?

Any help would be appreciated.

On 12/27/2025 at 5:23 PM, durianbox said:

Hi - I've been tangling with trying to use JDownloader2 and your MakeMKV container, routing them both through gluetun, and hoping someone can help. I've tried to find a good solution by reading different posts but just can't seem to get the right combination of things to work. This is all a port related issue and I feel like I'm missing something really simple.

Both JDownloader and MakeMKV use 5800 to access the WebUI.

Originally, I had MakeMKV installed.

• In the Settings I set Network Type > Container and then Container Network > gluetun.

• In the Settings of Gluetun I just + Add extra port from whatever specific container I am running through it.

  • In the case for MakeMKV I just set the port to 5800 and 5900 for the WebGui and VNC.

Installing JDownloader that uses the same ports - I can't seem to get to access each container through the WebUI. I'm not sure which specific ports I need to change (likely for Jdownloader) and where?

Any help would be appreciated.

Since you have more than one container under the same non-bridge network, you need to configure different ports for each container. You can use the "Web Listening Port (Non-Bridge Network Type)" and VNC Listening Port (Non-Bridge Network Type) settings (in container configuration).

On 12/27/2025 at 5:23 PM, durianbox said:

Hi - I've been tangling with trying to use JDownloader2 and your MakeMKV container, routing them both through gluetun, and hoping someone can help. I've tried to find a good solution by reading different posts but just can't seem to get the right combination of things to work. This is all a port related issue and I feel like I'm missing something really simple.

Both JDownloader and MakeMKV use 5800 to access the WebUI.

Originally, I had MakeMKV installed.

• In the Settings I set Network Type > Container and then Container Network > gluetun.

• In the Settings of Gluetun I just + Add extra port from whatever specific container I am running through it.

  • In the case for MakeMKV I just set the port to 5800 and 5900 for the WebGui and VNC.

Installing JDownloader that uses the same ports - I can't seem to get to access each container through the WebUI. I'm not sure which specific ports I need to change (likely for Jdownloader) and where?

Any help would be appreciated.

yeah I have similar issue but with brave container changed brave to a different port but no luck ended moving jdwonloader to a different port and that worked