September 14, 20178 yr Not really sure how long on most of my servers but on a N40L/N54L it ran for over a year - my others were less. The only reason I take the other servers down is to add/replace drives (replace when going with larger drives) or if I need to do maintenance on a VM either before unRAID had VMs with ESXi or now with VMs on unRAID. For the others longest was probably 6 months. Edited September 14, 20178 yr by BobPhoenix
September 14, 20178 yr Installing an unRaid update requires a reboot, which would tend to limit the uptime, particularly recently. In the old days, we could have much longer periods between updates and have longer uptimes. An extremely long uptime means you are missing a lot of updates wish is probably not a good thing!
September 14, 20178 yr My dedicated crashplan backup server that runs unRAID is usually up for quite a while at a time as I do not usually bother updating with every unRAID release. My main server was up for nearly a year and a half at one point. I skipped one whole release of unRAID on my main server, mostly because it was a "if it aint broke don't fix it"
September 14, 20178 yr I had a v5 server with over a year of uptime ... the only reason that streak ended was a power failure that exceeded the UPS timer I had set, so the system shut down. I agree, however, that with the much more frequent updates (and much simpler update process) with v6, you really don't want to go over a year without updating, as many of the updates are designed to improve security.
September 15, 20178 yr My Last Linux server lasted over 4Years. Could of gone longer, but I had to unplug it and move into our new house. Lol However with Unraid it does require updates now and then. Both of my machines have been up running for 38 Days and 42 Days. Had to reboot both of them to swap around some Hardware other wise who knows how long they would of been running for.
September 15, 20178 yr I'm at 3 days, 6 hours, 1 minute! LOL, we had a power outage a few days ago. Otherwise the answer would be "however long it has been since the last stable release" (I typically do all my pre-release testing on a VM)
September 15, 20178 yr Basically the only time my servers are ever shut down or rebooted are (a) extended power outages that last longer than the 10 minutes I have the UPS control software set for (rare); (b) software updates that require a reboot (the most common reason); or (c) hardware changes (adding/replacing a disk drive -- also fairly rare). It would be easy to get a year or longer of runtime (been there/done that) ... but it's not something I focus on. Basically I reboot whenever there's a new stable release (I have a test server for the pre-releases).
September 16, 20178 yr The uptime of my servers varies between one and two weeks. That is about the average time for testing "new" stuff. Edited September 16, 20178 yr by bonienl
October 1, 20178 yr Currently my main server which is running 6.3.5 has an uptime for 124days. Sent from my iPhone using Tapatalk
October 18, 20178 yr Oddly enough, the reason I end up shutting them down every 6 months or so, is so I can blow the dust out of them.
November 2, 20178 yr 147 days until a power outage outlasted my ups so I guess Ill take it apart and blow the dust out.
September 13, 20223 yr Currently 377 days. At my old house the city infrastructure was old, so there were power outages all the time. At my new house we have lost power a few times, but it get restored in seconds or minutes. Definitely less than 5 minutes, so the UPS keeps it going. It may be time to update to 6.10
January 16, 20233 yr 88 days that I know of is my record. It could have gone longer but I rarely pay attention before shutting it down. Hardware updates, software updates, the rare Plex error, dust cleanout and the occasional UPS busting power outage all take their toll.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.