7 hours ago, gacpac said:

for rustdesk any way to setup the encryption ?

Encryption is on by default with this value:

--key _

 

Hello, I just upgraded to unraid 7 and the dirsyncpro doesn't copy my SMB shares from my main PC out on my various network disks. It will analyze them, but when I hit the sync button nothing happens.

3 hours ago, d4man said:

Hello, I just upgraded to unraid 7 and the dirsyncpro doesn't copy my SMB shares from my main PC out on my various network disks. It will analyze them, but when I hit the sync button nothing happens.

Is SMB working correctly on your server in general after the upgrade to 7?

Nothing changed for DirSynPro.

Hi, I just installed Krusader (unraid v7) and all is working fine, but date formats are US (i.e. M/DD/YY). Any idea how I can fix this?

 

I have tried all 3 en_GB language configurations, no help. Thanks!

15 hours ago, ich777 said:

Is SMB working correctly on your server in general after the upgrade to 7?

Nothing changed for DirSynPro.

Thanks for your reply, I'll look into that later when I get home from work

 

EDIT: tapped into PC at home, and near as I can tell SMB seems to work fine, shares show up, can browse all my shares, and my shares appear under the SMB shares and I can browse them thru unraid under the file manager tab, I'm at a loss lol

Edited January 15, 20251 yr by d4man
added more info

4 hours ago, Rick Gillyon said:

Hi, I just installed Krusader (unraid v7) and all is working fine, but date formats are US (i.e. M/DD/YY). Any idea how I can fix this?

I'm not sure if that's doable with older versions there was a way with kdeglobals but I think this is not working any more.

1 minute ago, ich777 said:

I'm not sure if that's doable with older versions there was a way with kdeglobals but I think this is not working any more.

Thanks, it was okay in the binhex docker, not sure how though.

Just now, Rick Gillyon said:

Thanks, it was okay in the binhex docker, not sure how though.

That is really strange, I look into that, please give me a few days.

I have a second Unraid server on which I want to backup my pictures and documents etc. I have mounted the second Unraid server as individual nfs shares( pictures/docs/videos etc.) . Luckybackup tells me that the path is read only.

 

NFS shares are mounted under: mnt/remotes/UNRAID2_Bilder etc. Every share has read/write permissions for groups/owner/others.

 

It's actually not difficult but somehow I can't figure out where it sticks...

 

3 minutes ago, hYtas said:

NFS shares are mounted under

I'm not 100% if this is possibly a NFS issue, have you yet tried it with SMB if possible?

 

Can you please also try to enable Destination is FAT/NTFS? It seems that it has trouble to set the time on the files, I'm not sure if NFS does actually support that.

19 hours ago, d4man said:

Hello, I just upgraded to unraid 7 and the dirsyncpro doesn't copy my SMB shares from my main PC out on my various network disks. It will analyze them, but when I hit the sync button nothing happens.

What does the log say in this case?

Some errors?

8 minutes ago, ich777 said:

I'm not 100% if this is possibly a NFS issue, have you yet tried it with SMB if possible?

 

Can you please also try to enable Destination is FAT/NTFS? It seems that it has trouble to set the time on the files, I'm not sure if NFS does actually support that.

When I search for the shares it only finds nfs shares, so I haven't tried smb at all. 

But then I can't mount the shares via UD?

21 minutes ago, ich777 said:

What does the log say in this case?

Some errors?

No errors in logs

 

One suspect line in logs tho:

Local mounting is selected, please mount your local path to the container---

24 minutes ago, hYtas said:

When I search for the shares it only finds nfs shares, so I haven't tried smb at all. 

You have to select Windows to see the SMB shares within UD and of course share on the second server.

 

Have you tried yet to enable FAT/NTFS as pointed out in my previous answer in the luckyBackup sync settings (enable Advanced).

20 minutes ago, hYtas said:

But then I can't mount the shares via UD?

lucky works fine with mounted smb Shares through UAD (i dont use NFS, so cant speak therefore)

6 minutes ago, d4man said:

Local mounting is selected, please mount your local path to the container---

This is just a note that you have to mount the path to the container, did you mount the path with r/w slave?

Does the container grab the files from Windows and copy it to your Disks? Can you see the files within the file browser in DirSyncPro?

53 minutes ago, ich777 said:

This is just a note that you have to mount the path to the container, did you mount the path with r/w slave?

Does the container grab the files from Windows and copy it to your Disks? Can you see the files within the file browser in DirSyncPro?

Everything appears like it should, but there are warnings under the 'messages' tab in dirsyncpro, destination file can not be overwritten/created. I never had to do the r/w slave config for dirsyncpro.

 

EDIT: the problem appears to be with the paths of the folders in the jobs I created.

 

Edited January 15, 20251 yr by d4man

I just created a new test job, browsed each folder path thru the window in dsp and when I went to run it, got that same error, these paths have worked for a year, I have different jobs for different disks, and I like to record and backup my CS2 sessions.

I'm trying to run this via my GluetunVPN container network without success/can't access the WebUI. I've tried with a few different ports (made sure the coressponding TCP and UPD ports are added/open on GluetunVPN of course). Can't find any errors in the container log. 

 

If i switch network from "Container" to "Bridge" everything is working/I can access the WebUI, but when I switch to the GluetunVPN container network, I can't access the WebUI any longer. 

 

Currently running a few services through my GluetunVPN container network without hickups, so it shouldn't be the GluetunVPN setup. 

 

Am I missing something? 

 

Edited January 15, 20251 yr by eventorism

Hello, I installed megasync with the default settings on the template and I get this error. How to fix this? I tried to use UMASK 022 but still the same.

 

 

Also when I try to sync a folder, I get this error. Maybe this is related to the error above about permissions?

 

Edited January 16, 20251 yr by HHUBS

15 minutes ago, HHUBS said:

Hello, I installed megasync with the default settings on the template and I get this error. How to fix this? I tried to use UMASK 022 but still the same.

Please update the container itself, the error including message is now fixed.

13 hours ago, eventorism said:

I'm trying to run this via my GluetunVPN container network without success/can't access the WebUI. I've tried with a few different ports (made sure the coressponding TCP and UPD ports are added/open on GluetunVPN of course). Can't find any errors in the container log. 

Please share a bit more information:

What ports did you add where?

What are the default ports?

From where is the screenshot?

May I ask about what container we are talking about?

14 hours ago, d4man said:

I never had to do the r/w slave config for dirsyncpro.

But have you yet tried it?

 

14 hours ago, d4man said:

EDIT: the problem appears to be with the paths of the folders in the jobs I created.

In terms of the container nothing changed, the last update was just a update from the base packages but nothing changed their either.

 

I assume you have mounted a share through UD and you mount that into the container correct and then sync that to a share?

18 minutes ago, ich777 said:

Please share a bit more information:

What ports did you add where?

What are the default ports?

From where is the screenshot?

May I ask about what container we are talking about?

 

I have the JDownloader 2 container setup like this: 

 

I've added the port (both TCP and UDP 8070) to my GluetunVPN container config as such:

 

But I can't get the WebUI to load, it will load fine when I switch back to bridge. Since all the other services that I've setup like this are working (Qbittorent, Firefox, SABnzb etc) it makes me think there might be an issue with the Jdownloader container (?). 

Anyone successful in setting it up like this? Am I missing something? 

Edited January 16, 20251 yr by eventorism

12 minutes ago, eventorism said:

 

I have the JDownloader 2 container setup like this: 

 

I've added the port (both TCP and UDP 8070) to my GluetunVPN container config as such:

 

But I can't get the WebUI to load, it will load fine when I switch back to bridge. Since all the other services that I've setup like this are working (Qbittorent, Firefox, SABnzb etc) it makes me think there might be an issue with the Jdownloader container (?). 

Anyone successful in setting it up like this? Am I missing something? 

You have to expose the internal ports of the Jdownloader on GluetunVPN. I.e dont pick the 8070, pick 8080 as container port.