When I install the GPU Stats plugin, I get this on the Dashboard page:

"No GPUs selected - Select GPU(s) in GPUStat settings page and apply"

When I go to the settings, the "Unit ID for Dashboard(Multiple)" setting dropdown does nothing,

ie: I can't change the setting from "none"

17 minutes ago, RGauld said:

When I install the GPU Stats plugin, I get this on the Dashboard page:

"No GPUs selected - Select GPU(s) in GPUStat settings page and apply"

When I go to the settings, the "Unit ID for Dashboard(Multiple)" setting dropdown does nothing,

ie: I can't change the setting from "none"

Strange, it should use either nvidia-smi -L or lspci | grep VGA to find cards.

On 11/13/2024 at 1:27 PM, RGauld said:

When I install the GPU Stats plugin, I get this on the Dashboard page:

"No GPUs selected - Select GPU(s) in GPUStat settings page and apply"

When I go to the settings, the "Unit ID for Dashboard(Multiple)" setting dropdown does nothing,

ie: I can't change the setting from "none"

Same thing for me and it seems to see my card I just cant use the drop down. When I do lspci | grep VGA, I get 08:00.0 VGA compatible controller: Intel Corporation DG2 [Arc A380] (rev 05)
 

14 minutes ago, Ganroche said:

Same thing for me and it seems to see my card I just cant use the drop down. When I do lspci | grep VGA, I get 08:00.0 VGA compatible controller: Intel Corporation DG2 [Arc A380] (rev 05)
 

Which browser are you using?

seems it's a Chrome issue...  I tried opening Unraid under Microsoft Edge, and guess what, drop down in the settings now works, and stats are now showing on the dashboard...  hmmmm...  anyway to fix Chrome?

4 minutes ago, RGauld said:

seems it's a Chrome issue...  I tried opening Unraid under Microsoft Edge, and guess what, drop down in the settings now works, and stats are now showing on the dashboard...  hmmmm...  anyway to fix Chrome?

Will see if I can reproduce, as I use chrome and don't have the issue.

On 11/16/2024 at 7:48 AM, RGauld said:

seems it's a Chrome issue...  I tried opening Unraid under Microsoft Edge, and guess what, drop down in the settings now works, and stats are now showing on the dashboard...  hmmmm...  anyway to fix Chrome?

This was driving me batty!!!

 

I removed my 2nd 1050ti for the son in law's PC... his gpu died, and wanted to get gaming again quickly.

So, when I powered back up I couldn't see the GPU's, uninstalled the gupstats app, but no avail.

 

Changed to firefox after reading what you posted, and what do you know, i could tick the box with the remaining 1050ti and now the stats are visible!

 

Thank you!

Can confirm I was running into the issue "Vendor command returned unparseable data." after updating. I was reinstalling and setting up Jellyfin from scratch too. Thought I broke something else lol. Found out via intel_gpu_top in Terminal that my GPU was working, Transcoding, Ramdisk, ffmpeg all up and running. Its a Chrome [ Version 131.0.6778.69 (Official Build) (64-bit) ] bug. Open up firefox and the dropdown works.

On 11/17/2024 at 10:39 AM, DarthKegRaider said:

This was driving me batty!!!

 

I removed my 2nd 1050ti for the son in law's PC... his gpu died, and wanted to get gaming again quickly.

So, when I powered back up I couldn't see the GPU's, uninstalled the gupstats app, but no avail.

 

Changed to firefox after reading what you posted, and what do you know, i could tick the box with the remaining 1050ti and now the stats are visible!

 

Thank you!

@RGauld 2024.11.18 release should fix chrome issue.

 

Thanks to @dlandon for the fix.

19 hours ago, YaKillaCJ said:

Can confirm I was running into the issue "Vendor command returned unparseable data." after updating. I was reinstalling and setting up Jellyfin from scratch too. Thought I broke something else lol. Found out via intel_gpu_top in Terminal that my GPU was working, Transcoding, Ramdisk, ffmpeg all up and running. Its a Chrome [ Version 131.0.6778.69 (Official Build) (64-bit) ] bug. Open up firefox and the dropdown works.

Drop down fixed in latest release. Try setting intel_gpu timers to .7 1.3 for data error.

4 hours ago, SimonF said:

Drop down fixed in latest release. Try setting intel_gpu timers to .7 1.3 for data error.

Where is the "intel_gpu" timers setting located? im getting the "Vendor command returned unparseable data." after an update recently. Im trying to monitor my iGPU on an i5-9600K.

49 minutes ago, mega said:

Where is the "intel_gpu" timers setting located?

Settings -> GPU Statistics

For the past 2-3 versions or so the plugin has only shown this for me
 

Quote

Vendor command returned unparseable data.

 

On 11/19/2024 at 10:17 AM, isvein said:

For the past 2-3 versions or so the plugin has only shown this for me
 

 

Igpu? Change intel GPU top timers as posts above

Heads up I also had this issue on intel 13th gen (Raptor Lake-P [Iris Xe Graphics]). 

Noticed is saying the minimum refresh is now 2000 when default was 1000. 

Plus made other change of .7 1.3 to timing then hit apply & back loading now.

 

Edited November 20, 20241 yr by dopeytree

On 11/20/2024 at 4:07 PM, dopeytree said:

Heads up I also had this issue on intel 13th gen (Raptor Lake-P [Iris Xe Graphics]). 

Noticed is saying the minimum refresh is now 2000 when default was 1000. 

Plus made other change of .7 1.3 to timing then hit apply & back loading now.

 

To clarify this a bit. If you are on an Intel iGPU and running into the "Vendor command returned unparseable data." error. Go to "Settings > GPU Statistics" and change the "UI Automatic Refresh / Interval" to the new lowest value of "2000" and change the "Intel_top_command_timeout:" from the old default of ".500 .600" to the new value of ".7 1.3"

Sometimes it works. But most of the time, it is like this(see below). I'm on Unraid 6.12.13 and the plugin is updated to the latest. How to fix this?

 

8 minutes ago, HHUBS said:

Sometimes it works. But most of the time, it is like this(see below). I'm on Unraid 6.12.13 and the plugin is updated to the latest. How to fix this?

 

Which GPU do you have and does the GPU command provide any output?

6 hours ago, SimonF said:

Which GPU do you have and does the GPU command provide any output?

 

I have iGPU from i5 10400.

 

This is the result of intel_gpu_top command:

 

But for the command: "timeout -k .500 .400 intel_gpu_top -J -s 250" I get nothing.

 

6 hours ago, HHUBS said:

 

I have iGPU from i5 10400.

 

This is the result of intel_gpu_top command:

 

But for the command: "timeout -k .500 .400 intel_gpu_top -J -s 250" I get nothing.

 

Did you change the settings to be

 

To clarify this a bit. If you are on an Intel iGPU and running into the "Vendor command returned unparseable data." error. Go to "Settings > GPU Statistics" and change the "UI Automatic Refresh / Interval" to the new lowest value of "2000" and change the "Intel_top_command_timeout:" from the old default of ".500 .600" to the new value of ".7 1.3"

6 hours ago, SimonF said:

Did you change the settings to be

 

To clarify this a bit. If you are on an Intel iGPU and running into the "Vendor command returned unparseable data." error. Go to "Settings > GPU Statistics" and change the "UI Automatic Refresh / Interval" to the new lowest value of "2000" and change the "Intel_top_command_timeout:" from the old default of ".500 .600" to the new value of ".7 1.3"

I don't know if it's the same error but my error is "Vendor command returned no data.". The old config in my settings of "UI Automatic Refresh / Interval" is "1000" and settings of "Intel_top_command_timeout:" is ".500 1.5" and not ".500 .600". I didn't touch the settings before though. Anyway, I changed the values and still the same error. 🤷‍♂️

Edited November 25, 20241 yr by HHUBS

1 hour ago, HHUBS said:

I don't know if it's the same error but my error is "Vendor command returned no data.". The old config in my settings of "UI Automatic Refresh / Interval" is "1000" and settings of "Intel_top_command_timeout:" is ".500 1.5" and not ".500 .600". I didn't touch the settings before though. Anyway, I changed the values and still the same error. 🤷‍♂️

 

1 hour ago, HHUBS said:

I don't know if it's the same error but my error is "Vendor command returned no data.". The old config in my settings of "UI Automatic Refresh / Interval" is "1000" and settings of "Intel_top_command_timeout:" is ".500 1.5" and not ".500 .600". I didn't touch the settings before though. Anyway, I changed the values and still the same error. 🤷‍♂️

does this provide any output?

 

 

timeout -k .7 1.3 intel_gpu_top -J -s 1000 -d pci:slot="0000:00:02.0"

 

assuming that is the pci of your GPU, lspci | grep VGA

9 hours ago, SimonF said:

 

does this provide any output?

 

 

timeout -k .7 1.3 intel_gpu_top -J -s 1000 -d pci:slot="0000:00:02.0"

 

assuming that is the pci of your GPU, lspci | grep VGA

 

This is the result:

First time installing the plugin, as others on this page of the support thread have mentioned, I get a "Vendor command returned unparseable data" error message. I have a Nvidia 1070ti with the latest gpu driver installed. The gpu is attached to plex for transcoding, not sure if that could affect things. It is not attached to a VM. I do have it selected in the settings.




Edit: After a few restarts of the system it started working.

Edited November 27, 20241 yr by Vulkandr

19 hours ago, HHUBS said:

 

This is the result:

That looks like intel GPU top is not working do you have the latest version