mfwade Posted March 8, 2020 Share Posted March 8, 2020 Good Evening All, Just upgraded Unraid from 6.8.2 to 6.8.3, all went well - Thank you Unraid team... The only issue I am experiencing is that 4 of my data drives (spinners - out of the 28) are no longer displaying their temperature in the Main tab. They did previously under 6.8.2. Just curious if anyone else is seeing this, maybe a big, firmware related, or I just chalk it up to 'stuff' happens. At any rate, flawless upgrade and thanks again to the Unraid team! -MW tower-diagnostics-20200307-2347.zip Quote Link to comment
bonienl Posted March 8, 2020 Share Posted March 8, 2020 2 hours ago, mfwade said: The only issue I am experiencing is that 4 of my data drives (spinners - out of the 28) are no longer displaying their temperature in the Main tab Temperature display is controlled independently and its interval is determined by the setting "Tunable (poll_attributes)" which by default is set to 30 minutes. You may make this interval shorter, eg. 3 minutes (180s) to get faster updates. Quote Link to comment
mfwade Posted March 8, 2020 Author Share Posted March 8, 2020 Bonieni , thanks for the response. Unfortunately, after 17 hours of uptime (since the upgrade reboot) the drives still do not display their temps. I did not make any changes as you outlined in your response. It isn’t really that important rather a minor nuisance. I wonder if anyone else is experiencing similar or am I just that lucky 😀 An additional note, I may open a different thread, the issue that others previously reported wherein when clicking the view logs button from the main tab, it now prompts for a user name and password from my Mac (safari and chrome), and iPad (safari and chrome). I will try from a Winblows laptop later today and report back. Thanks agin, -MW Quote Link to comment
JorgeB Posted March 9, 2020 Share Posted March 9, 2020 It doesn't look like an Unraid problem, strange it was working before, those disks are not reporting temp, e.g.:, disk2: === START OF READ SMART DATA SECTION === SMART Health Status: OK Current Drive Temperature: 0 C Drive Trip Temperature: 0 C The other disks are, e.g. disk 10: === START OF READ SMART DATA SECTION === SMART Health Status: OK Percentage used endurance indicator: 6% Current Drive Temperature: 30 C Drive Trip Temperature: 63 C That comes from the SMART data, can't see how the upgrade could affect that, can you downgrade back to v6.8.2 to confirm? Pleas post new diags if it is working. Quote Link to comment
mfwade Posted March 9, 2020 Author Share Posted March 9, 2020 Good Morning Johnnie, I reverted back to 6.8.2 and the temp are showing up again. Diagnostics attached. Thanks again. -MW tower-diagnostics-20200309-0553.zip Quote Link to comment
JorgeB Posted March 9, 2020 Share Posted March 9, 2020 It appears to be a smartctl issue, newer Unraid is using v7.1 as opposed to v7.0 before, and for some reason v7.1 is not getting those drives temps, but it's not an Unraid problem, it would need to be fixed on smartctl, and likely it will in an upcoming release. Quote Link to comment
mfwade Posted March 9, 2020 Author Share Posted March 9, 2020 Thanks Johnnie, for now I will just remain on 6.8.2 unless you have a compelling reason for me to go up to 6.8.3. I typically try to go to the newer versions at home however, for now I will use the same tactic I use for work N-1 and 6.8.2 is the -1 for now. Thanks again, -MW Quote Link to comment
live4soccer7 Posted August 22, 2021 Share Posted August 22, 2021 (edited) I believe I have this same issue. I wonder why unraid/limetech has not updated the smartclt/smartmontools from 7.1 when we are on 6.9.2 now. Edited August 22, 2021 by live4soccer7 Quote Link to comment
ChatNoir Posted August 23, 2021 Share Posted August 23, 2021 7 hours ago, live4soccer7 said: I believe I have this same issue. I wonder why unraid/limetech has not updated the smartclt/smartmontools from 7.1 when we are on 6.9.2 now. Smartmontools are on 7.2 in 6.10RC Quote Link to comment
zavanilli Posted October 25, 2021 Share Posted October 25, 2021 any updates? I am having the same issue with some drives Quote Link to comment
brucecao Posted November 26, 2021 Share Posted November 26, 2021 On 8/23/2021 at 1:36 PM, ChatNoir said: Smartmontools are on 7.2 in 6.10RC but, how we do that? Changeset 5074 https://www.smartmontools.org/changeset/5074 scsiprint.cpp: Attempted fix to tickets 1272, 1331 and 1346 6 The difficulty is handling SCSI log _sub_-pages that hold 7 info about SSDs and newer hard drives, against older 8 devices (20 year old disks?) that do many and varied 9 things when asked to list supported sub-pages. Add a 10 heuristic and change some naming. Quote Link to comment
ChatNoir Posted November 26, 2021 Share Posted November 26, 2021 1 hour ago, brucecao said: but, how we do that? If you mean how to upgrade to 6.10RC, you should : backup your flashdrive update your plugins go to Tools / Update OS Select the Next branch and hit install Reboot If you mean something else, please clarify. Quote Link to comment
brucecao Posted November 29, 2021 Share Posted November 29, 2021 On 11/27/2021 at 1:22 AM, ChatNoir said: If you mean how to upgrade to 6.10RC, you should : backup your flashdrive update your plugins go to Tools / Update OS Select the Next branch and hit install Reboot If you mean something else, please clarify. How to just update Smartmontools 7.2? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.