March 14, 20188 yr Author 2 hours ago, blu3_v2 said: I second this request. I too like to run the Mover, stop Dockers, and stop Array prior to updating to reduce the risk of failure. That's part of 'mover logging' which can be turned back on.
March 14, 20188 yr Author 3 hours ago, Squid said: Its a licencing thing. No difference to the user. Not licensing really, just a courtesy to their request: http://www.pool.ntp.org/en/vendors.html#vendor-zone We applied for a "vendor zone" and willing to fork over some $cash but never heard back from them.
March 14, 20188 yr after updating I'm having trouble accessing the dashboard. I used to access it using http://myip I've also tried http://tower but nothing seems to be working. When I do my ip it gives me a connection refused message. It is up and running because my plex and tautulli dockers are running and accessible.
March 14, 20188 yr 4 hours ago, eikum said: Same issue here... ERROR: Opening device /dev/ttyUSB0 (errno=13 Permission denied) when I ls -la inside the /dev/ folder the permissions is following crw--w---- 1 root tty 4, 9 Mar 14 19:56 tty9 crw-rw---- 1 root dialout 4, 64 Mar 14 19:56 ttyS0 crw-rw---- 1 root dialout 188, 0 Mar 14 19:56 ttyUSB0 crw------- 1 root root 3, 0 Mar 14 19:56 ttyp0 crw------- 1 root root 3, 1 Mar 14 19:56 ttyp1 maybe something wrong here? Yes this issue is annoying, docker's documentation doesn't say anything about this so I wonder if it's something in @limetech's implementation/build of docker I'm using VAAPI in Emby and now I have to add chmod lines in my go file to make sure the DRI node is actually usable.
March 14, 20188 yr Author 1 minute ago, flimflamman said: after updating I'm having trouble accessing the dashboard. I used to access it using http://myip I've also tried http://tower but nothing seems to be working. When I do my ip it gives me a connection refused message. It is up and running because my plex and tautulli dockers are running and accessible. Assuming server name 'tower' and https is not enabled, try 'tower.local/'
March 14, 20188 yr 11 minutes ago, limetech said: Assuming server name 'tower' and https is not enabled, try 'tower.local/' Still not working. As far as I'm aware I don't have https enabled. I can telnet into my server still. No idea why I can't get into the dashboard
March 14, 20188 yr 1 minute ago, flimflamman said: Still not working. As far as I'm aware I don't have https enabled. I can telnet into my server still. No idea why I can't get into the dashboard from the command prompt, diagnostics and then upload the file stored on the flash drive
March 14, 20188 yr Also cannot boot default as I get stuck at loading bzroot. Had to plug in a monitor and boot into gui mode.
March 14, 20188 yr 12 minutes ago, Squid said: from the command prompt, diagnostics and then upload the file stored on the flash drive Thanks marks_media-diagnostics-20180314-1943.zip
March 14, 20188 yr May or may not be the problem, but "marks_media" is not a valid NETBIOS name. (You would've seen (none) at the login prompt via telnet/putty) Get rid of the underscore in Settings - Identification. The later versions unRaid is far more strict about this Edited March 14, 20188 yr by Squid
March 14, 20188 yr 4 minutes ago, Squid said: May or may not be the problem, but "marks_media" is not a valid NETBIOS name. (You would've seen (none) at the login prompt via telnet/putty) Get rid of the underscore in Settings - Identification. The later versions of SMB/unRaid are far more strict about this ok. any idea how can i do this if I can't access my settings from the webgui? - Do I just change it in the ident.cfg? Edited March 14, 20188 yr by flimflamman
March 14, 20188 yr edit on the flash drive /config/ident.cfg either on another computer or via nano locally You will have to reboot for it to take effect
March 15, 20188 yr 7 minutes ago, Squid said: edit on the flash drive /config/ident.cfg either on another computer or via nano locally You will have to reboot for it to take effect That did the trick. Thanks everyone for your help
March 15, 20188 yr Hmm, my NGINX docker app is having trouble connecting to the internet after the update. And all of my docker apps show an update is available. When I click update on any of them, it tries to but 0 bytes are changed and it stays showing update available. edit: I downgraded and all is good again. Edited March 15, 20188 yr by spencers
March 15, 20188 yr 1 hour ago, flimflamman said: after updating I'm having trouble accessing the dashboard. Just wondering which version of unRAID did you upgrade from?
March 15, 20188 yr 11 minutes ago, eschultz said: Just wondering which version of unRAID did you upgrade from? The netBIOS thing started rearing its head at 6.5.0-rc3 (https://lime-technology.com/forums/topic/69801-unraid-os-version-650-rc3-available/?tab=comments#comment-638565) unRaid however has always complained about incompatible netBIOS names in identity settings forever, but it never actually affected anything til then (I ran an incompatible name since 5.0 beta 8 with zero problems). Next release of this is going to handle this, along with some other things that have come up. Edited March 15, 20188 yr by Squid
March 15, 20188 yr 3 hours ago, limetech said: That's part of 'mover logging' which can be turned back on. Thanks limetech, will dig around in Settings and turn it back on.
March 15, 20188 yr 14 hours ago, vanes said: Running 6 hours! No problems I saw your RC6 call traces thread about Emby. https://lime-technology.com/forums/topic/70083-rc6-call-traces/?tab=comments#comment-641788 Are you still getting them with 6.5? I am getting the exact same errors with 6.5 and Emby Server. Had to roll back to 6.4.1. Here's the Diagnostics from 6.5 before rolling back server-diagnostics-20180314-1752.zip Edited March 15, 20188 yr by dmacias
March 15, 20188 yr i cant increase the hard drive, i put 100GB to make it 500GB, and then press enter, white blank it doesnt go back to the web gui, unless i press the refresh button it goes back to 400GB my current hard drive
March 15, 20188 yr 4 minutes ago, ren88 said: i cant increase the hard drive, i put 100GB to make it 500GB, and then press enter, white blank it doesnt go back to the web gui, unless i press the refresh button it goes back to 400GB my current hard drive While you just found a bug (screen shouldn't go white - I confirmed), what you're trying to do is wrong in the first place. You want to enter in 500G , not 100G to increase the vdisk to 500G
March 15, 20188 yr 6 minutes ago, Squid said: While you just found a bug (screen shouldn't go white - I confirmed), what you're trying to do is wrong in the first place. You want to enter in 500G , not 100G to increase the vdisk to 500G i did that, i put 500G and then press enter = white screen not returning to the web gui
March 15, 20188 yr 2 minutes ago, ren88 said: i did that, i put 500G and then press enter = white screen not returning to the web gui Like I said. Bug This gets logged when you attempt a resize: Mar 14 23:03:49 ServerA root: error: /VMs?subaction=disk-resize Edited March 15, 20188 yr by Squid
March 15, 20188 yr Just now, Squid said: Like I said. Bug ok so, i guess i gotta wait for the next update
March 15, 20188 yr 27 minutes ago, Squid said: Like I said. Bug This gets logged when you attempt a resize: Mar 14 23:03:49 ServerA root: error: /VMs?subaction=disk-resize yes thats the error i saw
Archived
This topic is now archived and is closed to further replies.