JM2005

Thank you for creating this plug in and for supporting and maintaining it so well.

I have a question about using Tailscale to access Bitwarden (Vaultwarden). Will this work over Tailscale and what is the best way to set this up using unraid? Thank you EDACerton for creating an awesome plug in.

Welcome aboard!

Will Bookstack work with a static IP instead of using bridge mode? If so, what is the best way to do this as I have it connecting to Maria database docker which is using a static IP. Thanks

I ran into similar issue myself. I replaced my current cache drive which I had previously converted to ZFS after watching space invader one video. I tried to use the mover like I had in the past and it would not work. When I would click on the mover button the GUI would refresh and nothing happened. So, I manually copied all the files off the old cache drive. I then removed the old cache drive and installed the new one. I formatted it ZFS again and then manually copied my files back. Of course, now it looks like those file/folder I copied back are not ZFS datasets and will need to convert manually. I am new ZFS, so I am still learning. All my dockers/VM located on my cache drive are working just fine. But I want to make sure I am doing this right. Thank you, JM2005

I updated the docker to latest version and when you look at the modules loaded it shows a couple modules that have updates available, when you click update, it will not allow you to update the modules. Reviewing the logs and it shows the following error below. Module description for 'FaceProcessing' is invalid. A 'pre-installed' module can't be downloaded

I am using this docker and when I run that test it comes back with a D rating. Here are the ones it that are having issues. Strict-Transport-Security Content-Security-Policy X-Content-Type-Options Permissions-Policy I did some digging on goggle and found the following. Workaround - Security Headers @ NGINX Proxy Manager · GitHub https://gist.github.com/R0GGER/916183fca41f02df1471a6f455e5869f

I was wondering if anyone else is having any issues with security headers being applied correctly? If I go to https://securityheaders.com and test my domain, it shows that security headers aren't applied properly.

Well, I wanted to give an update. I replaced the motherboard with exact same model and replaced both LSI cards and Power supply and Memory. I have flashed the new motherboard with the latest bios and still have the same issue. Oh yeah, I replaced my unraid USB boot stick with a new one too and restored from backup. This is crazy!

Does this motherboard have a CMOS clear jumper? I've looked and I cannot find it. I must be going blind.

Yeah, it is a weird issue that just came out of nowhere. I really liked this motherboard, and I may just buy the same one again if I can find a good price on it. I want to keep my same parts just replace the motherboard. Thank you for replying.

Any suggestions for a newer version of this board (ASRock Rack E3C246D4U). I have not found a solution so i have decided to replace it with a newer version if there is one. Thank you for any suggestions. JM2005

It has been some time since I've posted in this thread. I wanted to see if anyone had run into this issue that I am having with my unraid server. If I reboot the server, it will hang sometimes and act like it cannot see the USB boot stick. The first error that popped up when this happened was "MPT bios fault 10h encountered at adapter pci". I though a had a bad card so I replaced my LSI SAS9201-8i cards, and it still kept on happening. I removed both cards and attempted to reboot computer and it did not show this error but would not boot any USB stick I created. Looking in the motherboard bios it had lost the current time, so I replaced the CMOS battery after discharging. This did not fix the issue. I can turn off power switch on the power supply and turn it back on and it will start working again. It's a strange issue as it will sometimes reboot several times before it will fail. I even changed my unraid usb stick to a new one. I noticed that the motherboard keeps losing the time when it fails and will not detect my unraid usb stick. To recap what I have tried: 1. Created new USB unRaid boot stick 2. Replaced CMOS battery after fully discharging 3. Removed SAS9201-8i cards 4. Flashed Bios to latest version 5. Power cycle resets and starts usb booting working again until reboot. My motherboard model is an ASRock Rack E3C246D4U MB w/IPMI and CPU is Intel Xeon E-2288G CPU. I am hoping I explained this well enough. I would appreciate any help. Thank you. JM2005

I remember reading Tom's post back then and was so excited! Happy Birthday LimeTech.

Just wondering how safe Tailscale is security wise? They seem to log a lot of information about what IP's , hostnames and more while connected.

What happened to your deasmi/unraid-tailscale docker in the unraid app store? I just looked and its gone.

Thank you @trurlfor the reply. I have started the process and all looks good so far.

I want to replace Multiple Data Drives with a Single Larger Drive. My parity drive is larger so no issue with that part. I have 3 drives i want to remove and replace with one large drive. These drives have no data left on them as I have already moved the data off. What would the best process to do this? Thank you, JM2005

Has anyone else updated to this new bios?

I have not had any lockups since I disabled Turbo Boost last week. I managed to get Emby working with transcoding just fine. What does you CPU temps rise to when you are preforming these test?

I too have not had any lockups since turning off the Intel Turbo in the last 24 hours. Keeping my fingers crossed it stays that way.

@LateNight hows your troubleshooting coming along with William? Any news to report?

@LateNight Mine is showing the exact same information other than the time stamps and ID.

I have started getting lockup’s on my setup as well. I checked the IPMI logs and it had “CPU_CATERR” as well. My temps are idling now are around 39c to 42c. I just now disabled turbo boost. Hopefully this will help until I get my case temps down.

I really appreciate you taking the time to explain it all. I am limited somewhat by my case and a full ATX motherboard would just be to large. I have been reading several threads on AMD stuff and i keep coming back your setup as the one i feel that meets my needs. I have those 2-LSI SAS9201-8i cards i need to make sure i have room for. Your setup with the modded firmware to use the video for transcoding saves me from having to buy an additional graphics card and save a slot. Thank you for all your help. I just need to get my funds ready now. I may have a few other questions to ask and i will try not to bug you too much.