JM2005

It has been some time since I've posted in this thread. I wanted to see if anyone had run into this issue that I am having with my unraid server. If I reboot the server, it will hang sometimes and act like it cannot see the USB boot stick. The first error that popped up when this happened was "MPT bios fault 10h encountered at adapter pci". I though a had a bad card so I replaced my LSI SAS9201-8i cards, and it still kept on happening. I removed both cards and attempted to reboot computer and it did not show this error but would not boot any USB stick I created. Looking in the motherboard bios it had lost the current time, so I replaced the CMOS battery after discharging. This did not fix the issue. I can turn off power switch on the power supply and turn it back on and it will start working again. It's a strange issue as it will sometimes reboot several times before it will fail. I even changed my unraid usb stick to a new one. I noticed that the motherboard keeps losing the time when it fails and will not detect my unraid usb stick. To recap what I have tried: 1. Created new USB unRaid boot stick 2. Replaced CMOS battery after fully discharging 3. Removed SAS9201-8i cards 4. Flashed Bios to latest version 5. Power cycle resets and starts usb booting working again until reboot. My motherboard model is an ASRock Rack E3C246D4U MB w/IPMI and CPU is Intel Xeon E-2288G CPU. I am hoping I explained this well enough. I would appreciate any help. Thank you. JM2005

I remember reading Tom's post back then and was so excited! Happy Birthday LimeTech.

Just wondering how safe Tailscale is security wise? They seem to log a lot of information about what IP's , hostnames and more while connected.

What happened to your deasmi/unraid-tailscale docker in the unraid app store? I just looked and its gone.

Has anyone else updated to this new bios?

I have not had any lockups since I disabled Turbo Boost last week. I managed to get Emby working with transcoding just fine. What does you CPU temps rise to when you are preforming these test?

I too have not had any lockups since turning off the Intel Turbo in the last 24 hours. Keeping my fingers crossed it stays that way.

@LateNight hows your troubleshooting coming along with William? Any news to report?

@LateNight Mine is showing the exact same information other than the time stamps and ID.

I have started getting lockup’s on my setup as well. I checked the IPMI logs and it had “CPU_CATERR” as well. My temps are idling now are around 39c to 42c. I just now disabled turbo boost. Hopefully this will help until I get my case temps down.

I really appreciate you taking the time to explain it all. I am limited somewhat by my case and a full ATX motherboard would just be to large. I have been reading several threads on AMD stuff and i keep coming back your setup as the one i feel that meets my needs. I have those 2-LSI SAS9201-8i cards i need to make sure i have room for. Your setup with the modded firmware to use the video for transcoding saves me from having to buy an additional graphics card and save a slot. Thank you for all your help. I just need to get my funds ready now. I may have a few other questions to ask and i will try not to bug you too much.

If you don’t mind me asking what made you to decide to go with this choice of equipment? I like what I have read so far. Thank you for replying with such detail.

I appreciate you replying to my post. I did read most of that thread late last night. Did you ever figure out what was causing the lockup’s? Sorry if I overlooked it. Any other issues cropped up that you think may of be of interest? Do you think that larger cpu cooler will work with my case it is an iStarUSA D-3100HN 3U rackmount case? Of course I am looking to future proof as much as I can. Thank you,

I was planning on updating my current system awhile back, but other expenses came along and i had to wait longer than i planned. My current system has been in service since 2012 and consist of a Intel Xeon E3-1240 Sandy Bridge 3.3GHz, Kingston 16 GB, SUPERMICRO X9SCM-F-O Micro ATX Intel Xeon E3 Server Motherboard, (2)- LSI SAS9201-8i. I was looking at what Hoopster posted about his system and thought it looked like a nice upgrade path. I read that you installed a modified firmware to allow you to use the onboard video adapter for transcoding. I have a Windows 10 VM that i run Blue Iris software for my security cameras. My current Xeon cpu does not have Intel Quick-sync support and thought this would help with my high CPU usage. I have listed below the parts you used Hoopster. Any changes? https://www.newegg.com/asrock-rack-e3c246d4u-supports-intel-xeon-e-2100processor/p/N82E16813140021 https://www.amazon.com/gp/product/B00VB3Y89E/ref=ox_sc_saved_title_4?smid=A1Z5H6ZGWCMTNX&psc=1 https://www.provantage.com/intel-cm8068403380116~7ITEP69T.htm https://memory.net/product/m391a4g43mb1-ctd-samsung-1x-32gb-ddr4-2666-ecc-udimm-pc4-21300v-e-dual-rank-x8-module/

I am thinking about setting up NextCloud & Bitwardenrs dockers on my unraid system. I am sure this has been asked before but how safe is it to use a reverse proxy? I have never used a reverse proxy before and currently use VPN to access my server remotely.

I have tried a couple times to download 6.8.1-rc1 and it starts downloading then hangs up and never completes.

Ok I’ve updated it and kicked off a test file. Does this just remove the commercials and leave it in the same file format? Didn’t know if you provided a way to use x265 HEVC to compress the files after converting? Thank again,

Thanks i just removed it completely and reinstalled. I am getting the following error when attempting to remove commercials. /run/s6/services/autocomskip/autocomskip: line 216: /config/log/conversion.log: No such file or directory /run/s6/services/autocomskip/autocomskip: line 218: /config/log/conversion.log: No such file or directory Is this a headless setup with no GUI to adjust any settings? Thanks,

Any info on the Auto-Comskip?

I turned on Legacy Mode and let it download. This worked.

I am seeing the same screen.

Same thing here.

Yes it will restart the dvr engine if you restart the docker just fine.

I did find a fork of Yoshiofthewire docker. I used the Yoshiofthewire template and changed the docker repository to match stevotdo/docker-hdhomerundvr. This seemed to work just fine and looks like this one is up to date. I have included the forked docker location below. https://hub.docker.com/r/stevotdo/docker-hdhomerundvr/ I do like having options as well. Be sure you understand that the HDHomerun TV guide is not like the normal grid guide everyone is used too. Emby's TV Guide is the best I have seen.

Yeah Emby & Plex are both good choices. I have used them before. Thanks