Jump to content

JorgeB

Moderators
 View Profile  See their activity

  • Posts

    67,814

  • Joined

  • Last visited

  • Days Won

    708

 Content Type 

Everything posted by JorgeB

  1. JorgeB
    If you don't have parity you can just add them back to the array.
  2. JorgeB
    Yes.
  3. JorgeB
    Please use the existing plugin support thread:
  4. JorgeB
    You can do a new config (Tools -> New config).
  5. JorgeB
    Make sure disk shares are enabled, then click on cache and "compute" to see what exactly is using the space.
  6. JorgeB
    Diags are incomplete, shares are missing, I wanted to see if there was something else on cache.
  7. JorgeB
    I would run memtest for a couple of hours at least.
  8. JorgeB
    Rebooting should fix that, then grab diags after array start.
  9. JorgeB
    That looks more like a power connection/problem, and the disk looks healthy, but if the cables were replace/swapped and the problem persists it might be a disk problem, like mentioned above you should run an extended SMART test since the ones started never finished, likely due to spin down.
  10. JorgeB
    Please post the diagnostics.
  11. JorgeB
    Looks like a power/connection problem with the parity disk, check/replace cables and try again, look at the syslog to confirm the ATA errors are gone, or post new diags.
  12. JorgeB
    It's logged as a disk problem, run an extended SMART test on disk3.
  13. JorgeB
    Did it work?
  14. JorgeB
    It worked for me and I never had the plugin installed.
  15. JorgeB
    Both diags posted don't show a correcting check, assuming you have really done that and the errors return it suggests a problem with a controllers or a disk, controller would be my first guess, very unlikely the Intel controller would cause issues, so I would start with replacing that Asmedia controller with a different model.
  16. JorgeB
    Run a read test with the diskspeed docker to see if all disks are performing normally.
  17. JorgeB
    Enable the syslog server and post that after a crash.
  18. JorgeB
    Not needed, device might have dropped, reboot when you can and try again.
  19. JorgeB
    Looks like the flash drive is not being detected.
  20. JorgeB
    I expected as much, but it was worth trying. It's not a general bug, I and many other users have the same Mellanox NIC and it's detected without any issues, the question is why it's not working for you, maybe @bonienlwill have and idea.
  21. JorgeB
    Backup the licensed key, after the backup is done recreate the flash drive with a new install, copy the /config folder from the trial key to the licensed key, restore only the key from the backup.
  22. JorgeB
    Constant crashing, start by running memtest.
  23. JorgeB
    Most likely, network bandwidth looks good, you can get better speeds transferring to a cache pool with one or more fast flash devices.
  24. JorgeB
    If the error has been consistent I would try to get a replacement.
  25. JorgeB
    Yes, use the last backup and then reconfigure the remaining.
×
×
  • Create New...