bally12345

I have this same issue, not quite sure when it started but I have ∞°c for all temp values. Had a quick lol at the wiki page and I am wondering if perl package needs to be updated via nerdpack? I have Supermicro X8DT3-F motherboard with Dual Intel Xeon x5690 Sent from my SM-G973F using Tapatalk

Might add something like this for my VM ASUS GT710-SL-2GD5 GeForce GT 710 2 GB DDR5 Graphics with Passive 0 dB Efficient Cooling https://www.amazon.co.uk/dp/B07489XSJP/ref=cm_sw_r_wa_apa_i_XQaPEbV8X2N8A But would my Supermicro X8DT3 motherboard support another graphics card? There is no more full size pci slots Sent from my SM-G973F using Tapatalk

Got the card plugged in and checked the nvidia plugin settings and its detected. GPU is the first larger red box and the LSI card for my backplane in the bottom. I am assuming this is correct. The only issue I have now is I cant RDP to my Win10 VM, I changed the setting for Graphics card from VNC to NVIDIA GeForce GTX1650 but I cannot connect to the VM using RDP do I need to add ROM BIOS or do I need to get dummy HDMI dongle as nothing is plugged into the card? Followed SI video on YT for Plex set up and confirmed transcoding working correctly. Looks like I can't do both at same time.

I picked up a GTX 1650 low profile as it will fit in my 2u case... Should come by weekend I probably could have waited a few weeks or even a month or so but got bit restless and been wanting to add a GPU for for awhile. Need to do some reading before then to see how to install the nvidia version, I thought it was just a CA plugin Sent from my SM-G973F using Tapatalk

Do you have a link? Sent from my SM-G973F using Tapatalk

Bump on this... Saw a GTX 1030 could be had for £90-100 Still tempted to go with a GTX 1660 just because I am sure I read its similar performance or better than the older 1080 but cheaper? Sent from my SM-G973F using Tapatalk

So I haven't actually bought a graphics card for maybe 10+ years and don't do gaming at all but have a Supermicro server with X8DTI-F-P motherboard, dual Xeon x5690 and 64gb ddr3 which is mainly used for Plex and a few different VMs. Can I use add something like a GeForce GTX 1650 and use it to Transcode plex and also passthru to VMs at same time. I only have 2u chassis so guessing it will have to be low profile card. Sent from my SM-G973F using Tapatalk

Thanks for update, set the value to "no" and can now open the gui again. Only getting around 8MB/s down but better than nothing

Happy Birthday! Sent from my SM-G973F using Tapatalk

Anyone have some DDR3 either 8GB or 16GB sticks, been looking on ebay and the prices have crept up more than I would like to spend. Must be UK seller

Bad memory module I think took out one by one and think iv identified the correct one Not and its Booted. Think it's time to get rid of the 4GB sticks Could plex transcoding to RAM cause issues with older sticks? Sent from my SM-G973F using Tapatalk Must be another dead stick as only showing 36GB ram instead of 40GB Will look for some more sticks 16gb or 8gb x 6 ddr3 ecc on ebay.

Removed the SSD and currently stuck on the following part during OS boot Sent from my SM-G973F using Tapatalk

I noticed this morning my unraid server was not responding. I have just checked it and everything is running except I cannot not connect to GUI or using putty. Restarted it with no gui waited until login screen appears. Few mins later tried to access 192.168.1.3 (unraid static ip) and get This site can’t be reached 192.168.1.3 took too long to respond. Pinged it from command prompt and confused why it saying 192.168.1.31 C:\Windows\System32>ping 192.168.1.3 Pinging 192.168.1.3 with 32 bytes of data: Reply from 192.168.1.31: Destination host unreachable. Reply from 192.168.1.31: Destination host unreachable. Reply from 192.168.1.31: Destination host unreachable. Reply from 192.168.1.31: Destination host unreachable. Ping statistics for 192.168.1.3: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Can't access any logs, re-seated memory dimms, the only thing I am cautious about is the MX500 SSD I added. I wonder if thats failed but surely that wouldn't cause the system to stop responding. Just going to remove the SSD drive and see what happens.

Hi recently radarr has been replacing movies from x264 to x265, checked in total 111 movies are now x265. Not issue for me but have some family users on plex who have issues. I have now added x265, x.265, h265 and h.265 tags in must not include which will stop any more movies being changed. Is there a way for radarr to now re-scan for x264 format or do I have to delete the files then search for missing?

Thanks for the reply, that;s annoying but also not too much of an issue. You don't happen to know how I can fetch the --subtitles?

Hi used this for the first time, only needed a single show but for some reason its downloaded 1280x720. Anyway to force Full HD or 4K if available? I would like to know where I can add the following --tvmode=best --subtitles or equivalent too if possible

I have the exact same router with asuswrt-merlin running, mine is still rock solid and really doesn't need upgrading but LTS has stopped and as already have some Unifi APs I am thinking of getting the UniFi USG router instead.

I currently use ASUS router running Asuswrt-Merlin will see if I can get hold of another and link them up. Just done a quick google search and the Unifi USG look super easy to setup for site-to-site vpn

Removed the plugin and using their CLI and getting expected results. With the plugin no matter what version of the script I used I was only getting around half the speed. Speedtest by Ookla Server: Virgin Media ISP: Virgin Media Latency: 7.30 ms (3.51 ms jitter) Download: 384.10 Mbps (data used: 526.9 MB) Upload: 36.07 Mbps (data used: 19.1 MB) Packet Loss: Not available.

Hi does anyone know if it is possible to setup something like openvpn so the network looks identical at 2 locations and will allow something like a Set top box to think its connected at property one when its actually at property 2?

I know its a bit late now but install CA Backup / Restore Appdata and have it back up to your array.

I am currently at 48TB on array, I have WD Green I will eventually replace and a spare bay if a decent deal comes up on another 12TB WD Red.

It is working fine on 8080 I will just my other container to run on 8081

I deleted the container, used fresh template and changed the port, that worked. However no my 3 APs are showing as adopting. All my other settings are there the SSIDs and network override etc.

Sorry this might be a dumb question but how do I change this to run on port 8081 instead of 8080 root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='unifi-controller' --net='host' -e TZ="Europe/London" -e HOST_OS="Unraid" -e 'UDP_PORT_3478'='3478' -e 'TCP_PORT_8081'='8081' -e 'TCP_PORT_8443'='8443' -e 'TCP_PORT_8880'='8880' -e 'TCP_PORT_8843'='8843' -e 'UDP_PORT_10001'='10001' -e 'TCP_PORT_8081'='8081' -e 'PUID'='99' -e 'PGID'='100' -v '/mnt/user/appdata/unifi-controller':'/config':'rw' 'linuxserver/unifi-controller:latest' e44d6242138caecf565bd71a9dccdb07bb1318026ab66105a5f7caf348bf2879 The command finished successfully! When the docker starts it looks like it still pointing to 8080 [s6-init] making user provided files available at /var/run/s6/etc...exited 0. [s6-init] ensuring user provided files have correct perms...exited 0. [fix-attrs.d] applying ownership & permissions fixes... [fix-attrs.d] done. [cont-init.d] executing container initialization scripts... [cont-init.d] 10-adduser: executing... ------------------------------------- _ () | | ___ _ __ | | / __| | | / \ | | \__ \ | | | () | |_| |___/ |_| \__/ Brought to you by linuxserver.io We gratefully accept donations at: https://www.linuxserver.io/donate/ ------------------------------------- GID/UID ------------------------------------- User uid: 99 User gid: 100 ------------------------------------- [cont-init.d] 10-adduser: exited 0. [cont-init.d] 20-config: executing... [cont-init.d] 20-config: exited 0. [cont-init.d] 30-keygen: executing... [cont-init.d] 30-keygen: exited 0. [cont-init.d] 99-custom-scripts: executing... [custom-init] no custom files found exiting... [cont-init.d] 99-custom-scripts: exited 0. [cont-init.d] done. [services.d] starting services [services.d] done. Port 8080 not available