klipp01

Members
  • Posts

    42
  • Joined

  • Last visited

Everything posted by klipp01

  1. still highly likely to get data corruption as all disk access goes via RAM. This from an above post. The OS runs loads and runs in RAM Sent from my SM-G998U using Tapatalk
  2. I believe you can use another plug in USB drive and assign it as an array device Sent from my SM-G998U using Tapatalk
  3. I have a Ryzen 5 3600 with a MSI X570-A PRO (MS-7C37), Version 3.0 Motherboard and 32 GB of Corsair Vengeance LPX CMK16GX4M2B3200C16 ram. Been running for 2+ years and never a crash. Sent from my SM-G998U using Tapatalk
  4. Syncthing or resillio sync are two I've used to backup photos from my smartphone automatically. There are dockers for both. Sent from my SM-G998U using Tapatalk
  5. Not particularly but by chance are they shucked drives? Also was the old power connections maybe molex to sata pwr but the new power supply is sata pwr connectors? Sent from my SM-G998U using Tapatalk
  6. If it is a 3.5 hdd then you need this which has an additional a/c adapter as the USB bus does not provide enough power for a 3.5 hdd SATA to USB 3.0, Neeyer SATA III Hard Drive Adapter Cable for 3.5/2.5 Inch HDD/SSD with 12V/2A Power Adapter, 20 Inch https://a.co/d/aNN3mGw Sent from my SM-G998U using Tapatalk
  7. Is the 2TB drive in question a 3.5" hard drive or a 2.5" laptop hard drive? Sent from my SM-G998U using Tapatalk
  8. Yes both do it automatically when a file is added. Sometimes if the app stops running in the background on your smart phone you may need to relaunch it. I liked syncthing there is a video spaceinvaderone has that shows how to set it up. I started using it for transfers from my seedbox to my unraid server. Then I started using it to backup certain folders on my smartphone. I stopped using it because I think my ISP was throttling downloads to my unraid when I used syncthing. Transfers were slowing to a crawl and I couldn't get it resolved. So I moved to resillio-sync and so far haven't had slow transfer issues. It was pretty easy to setup. There is a pro version but I'm using the free version. Sent from my SM-G998U using Tapatalk
  9. You can use syncthing or resillio sync that's how I get stuff on my seedbox over to my unraid automatically. You can run as a docker and they can be set to monitor for changes. I use it to backup my photos from my phone to my unraid server as well. Sent from my SM-G998U using Tapatalk
  10. Firefox - for all things mobile and desktop/laptop Sent from my SM-G998U using Tapatalk
  11. I actually found the RSV-R4000U cheaper on Amazon and in stock. Sent from my SM-G998U using Tapatalk
  12. I ordered the RSV-R4000U 4U 2 days ago after I read this post. Even though I'll probably replace the fans it fit my use case better. Sent from my SM-G998U using Tapatalk
  13. I have 2 unraid with separate UPS as well. The UPS on one of my unraid servers was constantly showing 100% but during power outages I would find the server and UPS turned off. Turned server back on and parity check would start. I tried new batteries. Then I pulled batteries and it still showed 100%. So something was wrong with the UPS and I replaced it and new one no issues. Sent from my SM-G998U using Tapatalk
  14. I have the same thing going on it is trying re-encode all x265 content including 2160p stuff that was already x265. Some resulted in a small decrease. 1 or 2 actually increased in size slightly. A lot of failed ones that I downloaded x265 and were never re-encoded by unmanic till now. unmaniac still fails on subtitles that handbrake has no problems with.
  15. Might be mapping issue? I was bewildered as well since my appdata is on my cache. But my v2 install was mapped using /mnt/user so I tried that and it worked. Glad it worked for you. Sent from my Pixel 2 XL using Tapatalk
  16. Not sure if your issue is same as mine but had the same problem your having then noticed that I had used this from the faq "/mnt/cache/appdata/binhex-sonarr-v3" but mine needed to be mapped to "/mnt/user/appdata/binhex-sonarr-v3" as soon as I made that change I could connect. Sent from my Pixel 2 XL using Tapatalk
  17. I use syncthing to back up my photos and other folders on my phone to my unraid server. I used to use nextcloud but it was over kill I miss being able to access files and download them but can do that with wireguard VPN. I started using syncthing with my seedbox so started using it more to backup my phone. Sent from my Pixel 2 XL using Tapatalk
  18. Yeah this has happened to me a few times. Just restart container and it goes back to normal. Sent from my Pixel 2 XL using Tapatalk
  19. I have a gt240 in my Ryzen 5 3600 system. I put it in because I never bothered to check to see if my particular board would boot without a gpu. It is actively cooled as well and I've never noticed any fan noise from it. Sent from my Pixel 2 XL using Tapatalk
  20. Your best bet is to put all your data on 2 of the 8tb drives. You can start with the putting the 4 8tb drives with no data in the unraid array as data drives. Then connect the 2 8tb drives with your data as unassigned devices and copy data to array. You can do this without parity for now as the data will still reside on the original drives. Once copy is done you can use 1 as parity and add another as a data drive or just go dual parity from the get go. Sent from my Pixel 2 XL using Tapatalk
  21. https://www.amazon.com/dp/B00U8KSLA8/ref=cm_sw_r_other_apa_i_cDaEEbXV9PGTJ Sent from my Pixel 2 XL using Tapatalk
  22. Just curious but any reason it needs to be near the TV? For gaming VM or media streaming purposes? Sent from my Pixel 2 XL using Tapatalk
  23. Is there anything in the docker log for unmanic? Sent from my Pixel 2 XL using Tapatalk
  24. The library paths for movies and TV only help if you have a Movies and TV Shows share setup do you? Sent from my Pixel 2 XL using Tapatalk