perfessor101

So I got it to connect to AirVPN. When I load the Firefox container it works until I network it through the gluetun container adding the ports to the gluetun template. the Firefox container then reports cannot bind to address. When I add binhex-qbitorrent its webui comes back with unauthorized…. My post in the UnRaid Reddit was removed so that helps.

using the config generator at https://airvpn.org/generator click advanced click linux click OpenVpn UDP defaults to OpenVPN profile 2.5 click Separate key/certs click server of choice download the certs / keys I chose zip file extract them rename user.crt to client.crt rename user.key to client.key copy client.cert and user.cert to /mnt/user/appdata/gluetun/ in the docker template TIMEZONE: yours VPN_SERVICE_PROVIDER: airvpn VPN_TYPE: openvpn VPN_INTERFACE: tun0 this appears to have gotten mine going ... initial searching didn't have this all in one place ... so it's here for now

docker logs GluetunVPN reports client certificate missing value, but that isn't listed in the config ...

I'm trying to get GlutunVPN working with airvpn.org on unraid 7.3b2 and it doesn't appear to be working. I chose openvpn and airvpn and edited username and password. (instructions on SpaceInvader Ones video from a year ago) if i click on view container logs the browser window disappears too quickly to see any text. I can't see any logs in the appdata/gluetun folder how do i access the logs in the container and which ones would be the most useful for diagnosis? thanks for your time, Bobby

I just installed a Tesla P4 and have tried 3 drivers Latest, open source and production and each time it complains the card is not supported by that version of the driver and I need to try an older driver.

I was curious if someone could add https://github.com/pennydreadful/bookshelf or are there good examples of how to add it to the repositiory? thanks for your time,

Has anyone moved to the blampe docker from this one and is there any advice?

Many years ago I posted example code showing that it was excluding many file extensions from the recycle bin. I think I did all single, two, three and four digit extensions and most were not moved to the recycle bin. I had about two million files with the extension text put into the text file and only a few types made it into the recycle bin. It must have changed by now.

Hello, I'm having fun with the docker containers for Tdarr and Tdar_Node. in the docker /temp is mapped to /mnt/user/data and in Tdarr the transcode directory is set to /temp/transcoding. The full directory is /mnt/user/data/transcoding. Currently it's putting the files under /var/lib/docker/overlay2/... and I'm getting docker utilization warnings. 1.4G /var/lib/docker/overlay2/a70788961876b8b5894d14e2e5cc58f668233fb7b9a74f7045dc391117af8f08/diff/app/Tdarr_Node/Super Evil - S01E01 - Genesis Buns 1080p-TdarrCacheFile-8WonlHJQ0.mkv 1.4G /var/lib/docker/overlay2/a70788961876b8b5894d14e2e5cc58f668233fb7b9a74f7045dc391117af8f08/merged/app/Tdarr_Node/Super Evil - S01E01 - Genesis Buns 1080p-TdarrCacheFile-8WonlHJQ0.mkv Here's my docker configs as jpg's at the bottom thanks for your time and help, Bobby

Hello, I'm having some issues with my inital setup of the Tdarr and Tdarr_node dockers on my unRaid server. /mnt/user/data/media is where all my files are located I have transcoding mapped into /mnt/user/media/transcoding. my plugin stack is 1)Tdarr_Plugin_MC93_MigzImageRemoval Migz-Remove image formats from file 2)Tdarr_Plugin_lmg1_Reorder_Streams Tdarr_Plugin_lmg1_Reorder_Streams 3)Tdarr_Plugin_00td_filter_by_bitrate Filter by bitrate 4)Tdarr_Plugin_MC93_Migz1FFMPEG_CPU Migz-Transcode Using CPU & FFMPEG 5)Tdarr_Plugin_a9he_New_file_size_check New file size check if the file is transcoded it seems to fail. I'm guessing it can be anything from permissions to a transcode failure (although the transcoded file is generated). it appears to finish the transcode ... file exists and is over 1 GB but an earlier plugin in the stack says later that it has 0 file length. it goes step S01, N01, W01, W02, W03, W04, W05, W06, W02, W03 (FAILS), W01 different libraries (with same /temp path) have the transcoding files in different directories long files are actually in /mnt/user/data/transcoding and the short files are transcoding in 1.4G /var/lib/docker/overlay2/a70788961876b8b5894d14e2e5cc58f668233fb7b9a74f7045dc391117af8f08/diff/app/Tdarr_Node/Super Evil - S01E01 - Genesis 1 Bluray-1080p-TdarrCacheFile-8WonlHJQ0.mkv 1.4G /var/lib/docker/overlay2/a70788961876b8b5894d14e2e5cc58f668233fb7b9a74f7045dc391117af8f08/merged/app/Tdarr_Node/Super Evil - S01E01 - Genesis 1 Bluray-1080p-TdarrCacheFile-8WonlHJQ0.mkv https://pastebin.com/fCNJet5t thanks for any help, Bobby w81kPZKSsjG-log.zip

Sorry wrong terminology I replaced drive 10 with the new drive not added it was probably dead a month ago. server rebooted after a power outage drive 10 was silently dead after the reboot monthly parity check (correcting) let me fix the next dead drive lost cache drive (corrupted superblock it looks like)

I trusted parity then added the drive

said disk emulated ... was quite some time later that it said unmountable most of the problems I've had this month were from errors that my server was not reporting that I didn't catch in time. What does the trust parity button do?

drive said is emulated at start of rebuild then it switched to unmounted later not other way around

latest diagnostics. lots of problems since switching from aoc-saslp-mv8 and saslp2-mv8 to sas 9201-16i in IT mode lost three drives in a month last rebuild two weeks ago "successful" as far as I know this rebuild I'm hoping is still ok i just don’t want to waste 18 hours to get an unmountable drive storage-diagnostics-20210826-1646.zip

drive is rebuilding / emulated and is saying unmountable at 11% is it worth continuing ?

i finally removed my aoc-sas2lp-mv8 cards because of the warnings ... this is when all the unreadable drives started ... think I'll remove the SAS 9201-16i and see if works stable after with the marvel chipsets

I've shutdown, reseated all the drives in their hotswaps, rebooting now. is there any spam I can cut down on?

Hello, Unraid 6.9.2 Array drive is listed in both array and as unassigned (didn't notice before attempted file transfers on another drive to this one via unbalance) array drive had a read error "both locations" drive not responding now array drive disabled have replacement drive precleared was going to replace 14 ... now replacing 16? was going to move files from drive 14 before rebuilding drive 14 with new drive drive 16 had 8 read errors then disabled want to know safest way to get array back up with good parity if having drives listed as both array and unassigned has happened to others recently Thanks for your time Bobby storage-diagnostics-20210826-1033.zip

Rebooted the array and the drive was unmountable with offline uncorrectable 111, current pending sector 112. Went from 1 two days ago and jumped up yesterday to 111. I have the community backup running it should have most of it. Tried once yesterday to rsync everything off , but got got tons of errors about 4 hours in. I'm curious how much time I should invest into recovering data from the drive of if it's a lost cause. When on the webGUI page for the drive if i click on btrfs check I get parent transid verify failed on 1071661056 wanted 42552013 found 42546596 parent transid verify failed on 1071661056 wanted 42552013 found 42546596 Ignoring transid failure ERROR: could not setup extent tree ERROR: cannot open file system Opening filesystem to check... When I downloaded the smart info for the drive I got this: smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.10.28-Unraid] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Black Device Model: WDC WD2002FAEX-007BA0 Serial Number: WD-WMAY02****** LU WWN Device Id: 5 0014ee 65668b897 Firmware Version: 05.01D05 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Aug 7 13:25:12 2021 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: (28860) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 294) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 253 253 021 - 8883 4 Start_Stop_Count -O--CK 079 079 000 - 21958 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 001 001 000 - 88502 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 269 192 Power-Off_Retract_Count -O--CK 200 200 000 - 163 193 Load_Cycle_Count -O--CK 190 190 000 - 30593 194 Temperature_Celsius -O---K 108 094 000 - 44 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 112 198 Offline_Uncorrectable ----CK 200 200 000 - 111 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 111 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 5 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 5 [4] occurred at disk power-on lifetime: 22965 hours (956 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 b1 1f 05 98 40 00 Error: WP at LBA = 0xb11f0598 = 2971600280 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 f8 00 00 20 00 00 40 40 08 10d+00:31:25.721 WRITE FPDMA QUEUED 61 00 08 00 f0 00 00 00 02 00 40 40 08 10d+00:31:25.721 WRITE FPDMA QUEUED 60 00 18 00 e8 00 00 09 ef a5 d0 40 08 10d+00:31:25.721 READ FPDMA QUEUED 60 00 28 00 e0 00 00 06 69 67 e8 40 08 10d+00:31:25.721 READ FPDMA QUEUED 60 00 08 00 d8 00 00 04 46 3d d8 40 08 10d+00:31:25.721 READ FPDMA QUEUED Error 4 [3] occurred at disk power-on lifetime: 22965 hours (956 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 b1 1f 05 98 40 00 Error: WP at LBA = 0xb11f0598 = 2971600280 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 40 00 f0 00 00 00 1f f0 c0 40 08 10d+00:30:39.503 WRITE FPDMA QUEUED 61 00 20 00 d8 00 00 00 1f ec 60 40 08 10d+00:30:39.503 WRITE FPDMA QUEUED 61 00 20 00 d0 00 00 00 1f ec 20 40 08 10d+00:30:39.503 WRITE FPDMA QUEUED 61 00 20 00 c8 00 00 00 1f eb e0 40 08 10d+00:30:39.503 WRITE FPDMA QUEUED 61 00 60 00 c0 00 00 00 1f eb 60 40 08 10d+00:30:39.503 WRITE FPDMA QUEUED Error 3 [2] occurred at disk power-on lifetime: 22965 hours (956 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 b1 1f 05 98 40 00 Error: WP at LBA = 0xb11f0598 = 2971600280 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 20 00 00 00 00 00 c0 40 08 10d+00:30:01.242 WRITE FPDMA QUEUED 60 00 08 00 18 00 00 b1 1f 06 10 40 08 10d+00:30:01.242 READ FPDMA QUEUED 60 00 08 00 10 00 00 b1 1f 05 98 40 08 10d+00:30:01.242 READ FPDMA QUEUED 60 00 08 00 08 00 00 04 46 3d c8 40 08 10d+00:30:01.242 READ FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 e0 08 10d+00:30:01.163 FLUSH CACHE EXT Error 2 [1] occurred at disk power-on lifetime: 22965 hours (956 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 02 00 00 00 b1 1f 05 98 40 00 Error: UNC at LBA = 0xb11f0598 = 2971600280 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 02 00 00 00 00 00 ad a0 a4 40 40 08 10d+00:29:23.096 READ FPDMA QUEUED 60 02 00 00 f8 00 00 ad a0 a2 40 40 08 10d+00:29:23.096 READ FPDMA QUEUED 60 02 00 00 f0 00 00 ad a0 a0 40 40 08 10d+00:29:23.096 READ FPDMA QUEUED 60 01 80 00 e8 00 00 b1 1f 0f 90 40 08 10d+00:29:23.096 READ FPDMA QUEUED 60 02 00 00 e0 00 00 b1 1f 0d 90 40 08 10d+00:29:23.096 READ FPDMA QUEUED Error 1 [0] occurred at disk power-on lifetime: 22934 hours (955 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 51 0a 00 00 00 e8 8e bb 84 40 00 Error: AMNF at LBA = 0xe88ebb84 = 3901668228 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 02 00 00 b8 00 00 e8 8e d1 c0 40 08 8d+17:00:22.280 READ FPDMA QUEUED 60 0a 00 00 b0 00 00 e8 8e c7 c0 40 08 8d+17:00:22.279 READ FPDMA QUEUED 60 0a 00 00 a8 00 00 e8 8e bd c0 40 08 8d+17:00:22.275 READ FPDMA QUEUED 60 0a 00 00 a0 00 00 e8 8e b3 c0 40 08 8d+17:00:22.275 READ FPDMA QUEUED 60 03 60 00 98 00 00 e8 8e b0 60 40 08 8d+17:00:22.193 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 90% 22966 2971600280 # 2 Extended offline Completed without error 00% 53900 - # 3 Extended offline Completed without error 00% 37158 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 44 Celsius Power Cycle Min/Max Temperature: 30/44 Celsius Lifetime Min/Max Temperature: 30/58 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (198) Index Estimated Time Temperature Celsius 199 2021-08-07 05:28 45 ************************** ... ..( 2 skipped). .. ************************** 202 2021-08-07 05:31 45 ************************** 203 2021-08-07 05:32 46 *************************** ... ..( 2 skipped). .. *************************** 206 2021-08-07 05:35 46 *************************** 207 2021-08-07 05:36 47 **************************** ... ..( 4 skipped). .. **************************** 212 2021-08-07 05:41 47 **************************** 213 2021-08-07 05:42 48 ***************************** ... ..( 37 skipped). .. ***************************** 251 2021-08-07 06:20 48 ***************************** 252 2021-08-07 06:21 49 ****************************** ... ..( 33 skipped). .. ****************************** 286 2021-08-07 06:55 49 ****************************** 287 2021-08-07 06:56 50 ******************************* ... ..( 18 skipped). .. ******************************* 306 2021-08-07 07:15 50 ******************************* 307 2021-08-07 07:16 51 ******************************** ... ..( 43 skipped). .. ******************************** 351 2021-08-07 08:00 51 ******************************** 352 2021-08-07 08:01 ? - 353 2021-08-07 08:02 30 *********** 354 2021-08-07 08:03 31 ************ 355 2021-08-07 08:04 32 ************* 356 2021-08-07 08:05 32 ************* 357 2021-08-07 08:06 33 ************** 358 2021-08-07 08:07 34 *************** 359 2021-08-07 08:08 34 *************** 360 2021-08-07 08:09 35 **************** ... ..( 2 skipped). .. **************** 363 2021-08-07 08:12 35 **************** 364 2021-08-07 08:13 36 ***************** 365 2021-08-07 08:14 36 ***************** 366 2021-08-07 08:15 37 ****************** 367 2021-08-07 08:16 37 ****************** 368 2021-08-07 08:17 37 ****************** 369 2021-08-07 08:18 38 ******************* 370 2021-08-07 08:19 38 ******************* 371 2021-08-07 08:20 ? - 372 2021-08-07 08:21 30 *********** 373 2021-08-07 08:22 30 *********** 374 2021-08-07 08:23 31 ************ 375 2021-08-07 08:24 32 ************* 376 2021-08-07 08:25 32 ************* 377 2021-08-07 08:26 33 ************** 378 2021-08-07 08:27 34 *************** 379 2021-08-07 08:28 34 *************** 380 2021-08-07 08:29 35 **************** 381 2021-08-07 08:30 35 **************** 382 2021-08-07 08:31 35 **************** 383 2021-08-07 08:32 36 ***************** 384 2021-08-07 08:33 36 ***************** 385 2021-08-07 08:34 37 ****************** 386 2021-08-07 08:35 37 ****************** 387 2021-08-07 08:36 37 ****************** 388 2021-08-07 08:37 38 ******************* 389 2021-08-07 08:38 38 ******************* 390 2021-08-07 08:39 39 ******************** 391 2021-08-07 08:40 39 ******************** 392 2021-08-07 08:41 39 ******************** 393 2021-08-07 08:42 40 ********************* ... ..( 6 skipped). .. ********************* 400 2021-08-07 08:49 40 ********************* 401 2021-08-07 08:50 41 ********************** ... ..( 2 skipped). .. ********************** 404 2021-08-07 08:53 41 ********************** 405 2021-08-07 08:54 42 *********************** ... ..( 5 skipped). .. *********************** 411 2021-08-07 09:00 42 *********************** 412 2021-08-07 09:01 43 ************************ ... ..( 6 skipped). .. ************************ 419 2021-08-07 09:08 43 ************************ 420 2021-08-07 09:09 44 ************************* ... ..( 3 skipped). .. ************************* 424 2021-08-07 09:13 44 ************************* 425 2021-08-07 09:14 46 *************************** ... ..(117 skipped). .. *************************** 65 2021-08-07 11:12 46 *************************** 66 2021-08-07 11:13 45 ************************** ... ..( 71 skipped). .. ************************** 138 2021-08-07 12:25 45 ************************** 139 2021-08-07 12:26 44 ************************* ... ..( 7 skipped). .. ************************* 147 2021-08-07 12:34 44 ************************* 148 2021-08-07 12:35 43 ************************ ... ..( 4 skipped). .. ************************ 153 2021-08-07 12:40 43 ************************ 154 2021-08-07 12:41 42 *********************** ... ..( 8 skipped). .. *********************** 163 2021-08-07 12:50 42 *********************** 164 2021-08-07 12:51 41 ********************** ... ..( 26 skipped). .. ********************** 191 2021-08-07 13:18 41 ********************** 192 2021-08-07 13:19 42 *********************** 193 2021-08-07 13:20 43 ************************ 194 2021-08-07 13:21 43 ************************ 195 2021-08-07 13:22 43 ************************ 196 2021-08-07 13:23 44 ************************* 197 2021-08-07 13:24 44 ************************* 198 2021-08-07 13:25 44 ************************* SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 3169 Vendor specific Thanks for any time and help, Bobby storage-diagnostics-20210807-1402.zip

Hello, I'm most likely looking for an inexpensive power supply recommendation for a 24 drive unRaid system. Newegg Canada if possible. in the last few unRaid releases I’m getting random shutdowns of the system. powers down and I have to switch off the power supply to get it to power back on. XFX power supply currently ... stopped getting them because I got one with mis-wired connectors. (molex peripheral with red black yellow black - reboots really fast) minimum I’m guessing would be 750W single rail power supply? i found an inexpensive micronicsglobal one at 700W but it has IDE not molex peripheral connectors? http://micronicsglobal.com/post/125 thanks for your time, Bobby

Currently I can't get a recycle.bin working on either of my UnRaid arrays ... 6.6.0-rc3 wrote a script that generates a bunch of files with single, double and triple character extensions (upper and lower case letters with numbers) ... it generates about 242,234 files four characters is over a million files ... that might take an hour or two to delete from Windows 7 Here's the script for the brave ... it's pretty bad ... took me 45 minutes of googling When my arrays start co-operating again I'll give it another try I put it on disk5 in my case under a directory called recycle.test and with a sub directory called test.directory and hopefully makes a file named listing.before.delete.txt After which one would then delete the generated files and do a new directory listing with ls -1a to a file called listing.after.delete.txt and then do a diff between them Hopefully my variable names aren't too mangled #!/bin/bash dirroot=/mnt/disk5/recycle.test dirtest=$dirroot/test.directory for c1 in {A..Z} {a..z} {0..9} do filename=1one extention=$c1 printf "%s\n" "$dirtest/$filename.$extention" touch $dirtest/$filename.$extention done read -rsp $'1 - Press enter to continue...\n' for c1 in {A..Z} {a..z} {0..9} do for c2 in {A..Z} {a..z} {0..9} do filename=2two extention=$c1$c2 printf "%s\n" "$dirtest/$filename.$extention" touch $dirtest/$filename.$extention done done read -rsp $'2 - Press enter to continue...\n' for c1 in {A..Z} {a..z} {0..9} do for c2 in {A..Z} {a..z} {0..9} do for c3 in {A..Z} {a..z} {0..9} do filename=3three extention=$c1$c2$c3 printf "%s\n" "$dirtest/$filename.$extention" touch $dirtest/$filename.$extention done done done read -rsp $'3 - Press enter to continue...\n' ls -1a $dirtest >$dirroot\listing.before.delete.txt read -rsp $'Press enter to continue...\n' read -rsp $'Press enter to continue...\n' read -rsp $'Press enter to continue...\n' Thanks for your time, Bobby

I mentioned something a few months back about certain file extensions just disappearing on deletion and not being recycled. I was considering writing a script to generate all three letter file extensions and see how many got recycled ... but then I realized unRaid isn’t running on dos 3.0.

Hello Squid, I would really appreciate if you could update this plugin I would be fine with having to manually restart the array after a ransomware detection if all it can take is visiting a site with a bad advert ... https://blog.malwarebytes.com/threat-analysis/2015/04/booby-trapped-hugo-boss-advert-spreads-cryptowall-ransomware/ I spent several weeks years ago fighting with facebook over an advertising site they had in their ad rotation with a hijacked robots.txt file It led to a website locking up your browser and claiming your computer was infected ... and their answer was cool you tracked down all the involved ip's and url's down ... we could care less about protecting you from this it's not our job and not our problem ... not our website ... they suggested maybe I just put the url's in my hosts file as 127.0.0.1 I asked about all the users that might fall for that scam in question. Facebook's stance on this issue may have changed since ... but at the time I was pretty angry. Thanks for your time, and putting up with my rant ... Bobby