dheg

Members
  • Content Count

    413
  • Joined

  • Last visited

Everything posted by dheg

  1. I fixed it, one of the dockers (Heimdall) was using port 443, you put me in the right path! Instead of messing with the command line, I tried first to start in safe mode, the webgui loaded without issues. I changed the docker port to 443 and rebooted, everything is fine now. Thanks!
  2. Thanks for this, it's not yet sorted, I was hoping for some clues. The only thing I can think of is that I have assigned those ports to docker. Do you know how can I check docker from the command line?
  3. The system was working fine until yesterday. I had a power outage but the UPS did its job and as far as I know the shutdown was clean. I started the server this morning and I cannot access the webgui. The rest seems to be working fine. I can SSH into the system. All dockers are running fine, I can access their webguis VM running as well (started from the command line) I reboted and same behaviour, no error message and everything seems fine. Any ideas? gaia-diagnostics-20210725-2232.zip
  4. Hi, I just updated to 6.9.0 and get a "Boot error" message. I did not want to update, I got the feeling something like this would happen. This is what I've tried so far: Tried to reboot and didn't work. Access the boot menu and tried UEFI, it does nothing and comes back to the boot menu From the boot menu tried USB and get the "Boot error" message What do I do now?
  5. Hi, I have a disk with 32 disk errors, but parity is fine and smart as well. What could this be? gaia-diagnostics-20201217-1036.zip
  6. I still can make this work, the device is there: root@gaia:/proc/bus/input# lsusb Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 051d:0004 American Power Conversion Smart-UPS_1000 FW:UPS 04.1 / ID=1018 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 1b1c:1c07 Corsair USB2.0 Hub Bus 001 Device 003: ID 05e3:0608 Genesys Logic, Inc
  7. Thanks johnnie.black. Power or data cables?
  8. I have 32 read error on disk 2, I just ran an extended smar test and it's healthy. What could this be? Should I worry and replace the disk? Attached is diagnosticsgaia-diagnostics-20200331-2039.zip
  9. Hopefully you can help... I have the APC UPS SMC1000IC (https://www.apc.com/shop/hr/en/products/APC-Smart-UPS-C-1000VA-LCD-230V-with-SmartConnect/P-SMC1000IC?isCurrentSite=true). I got it to work using the USB cable and type in the USB settings. It did stop working though. However the strange thing is that it is still recognized (Bus 005 Device 002) by unraid, it does not connect though. root@gaia:~# for usb_ctrl in $(find /sys/bus/usb/devices/usb* -maxdepth 0 -type l); do pci_path="$(dirname "$(realpath "${usb_ctrl}")")"; echo "Bus $(cat "${usb_ctrl}/busnum") -->
  10. In case of restoring, should I restore as well the fd file? What is this?
  11. I didn't know it was for home assistant, it just looked nice. I have an unopened icy994, but don't know yet when I'll have the time to play with it. My objective was to be able to monitor psu usage with gaming vm off/on and display off. Any kind of export would be enough, csv, sheets, anything Sent from my SM-G973F using Tapatalk
  12. Thanks! And now, what do I do with that code [emoji3526]? Sent from my SM-G973F using Tapatalk
  13. Hi all I've just installed a win10 VM in a new server (3950x + x570 Taichi). I passed-through a 1660Ti and one usb controller. I followed the videos of Spaceinvader and it went pretty smooth. I am planning on putting the server in the basement and running video and usb optical cables from there (around 15m) to my office to have a work/game station. I bought these in Aliexpress: https://es.aliexpress.com/item/32995536889.html?spm=a2g0s.9042311.0.0.2eea63c05dbaCC https://es.aliexpress.com/item/33014622720.html?spm=a2g0s.9042311.0.0.2eea63c05dbaCC The
  14. Actually i didn't, I thought of jumping straight away to the 3900 after reading somewhere that issues were fixed. Then 3900 ran out of stock and decided to wait for the 3950x. I have the x570 taichi awaiting for the 3950x to arrive. I bought it last week on presale, let's wait and see when it comes. Sent from my SM-G973F using Tapatalk
  15. And are you sure it'll work? I'm planning a similar setup, ryzen 2700 and a x570 mb to be able to upgrade to a 3900 once it's tested, i read mix things about passthrough and amd Sent from my SM-G973F using Tapatalk
  16. Are you planning to passthrough a gpu? Sent from my SM-G973F using Tapatalk
  17. Hopefully someone can help... I am planning to replace my old unraid server (a few dockers, but mainly a file server) and was about to pull the trigger with an i9 9900k. The goal is to have a Win 10 VM for gaming and photo editing, and dockers for the usual stuff, plus emby server, tv server, and maybe in the near future pfsense. Then I saw the new Ryzen 3900, which seems to outperform the i9 at the same price (plus the latest security concerns around the intel chips) and started investigating on it. I read that the Ryzen 3000 series don’t work yet with GPU pa
  18. What about the non-ECC ram? I am thinking of exactly the same setup, although to have a headless VM desktop for lightroom and gaming. Sent from my SM-G973F using Tapatalk
  19. I recently moved from SAB to nzbget and the only feature I'm missing is notifications. Found a script to send pushover notifications, but it does not work. Aparently it needs phyton for the script to work. Is it installed? Could it be easily added?
  20. Hi, I recently moved from SAB to nzbget and the only feature I'm missing is notifications. Found a script to send pushover notifications, but it does not work. Aparently it needs phyton for the script to work. Is it installed? Could it be easily added? Thanks in advance!
  21. I’ve having troubles lately with my server, specifically: Mover hangs, it shows as running but no files are moved. I can’t stop the array either Preclear pauses for no reason, and I can’t start it again Can’t stop dockers I don’t know if all these are related. I can’t pinpoint the origin of this. I have had my server down for almost 2 years, so when I powered it on again I had to update unraid, plugins, dockers, etc. A lot of changes all at once. Right now: I have downloaded files recognized by radarr in the movies share and seated in the cache pool
  22. Thanks! Sent from my SM-G950F using Tapatalk