"SimpleFeatures" Plugin - Version 1.0.11



2848 posts in this topic Last Reply

Recommended Posts

last 100 lines of my syslog

 


Feb 23 17:03:16 Tower kernel: md: import disk2: [8,144] (sdj) WDC_WD30EFRX-68AX9N0_WD-WMC1T0453360 size: 2930266532
Feb 23 17:03:16 Tower kernel: mdcmd (4): import 3 8,112 2930266532 WDC_WD30EFRX-68AX9N0_WD-WMC1T0638976
Feb 23 17:03:16 Tower kernel: md: import disk3: [8,112] (sdh) WDC_WD30EFRX-68AX9N0_WD-WMC1T0638976 size: 2930266532
Feb 23 17:03:16 Tower kernel: mdcmd (5): import 4 65,0 1953514552 WDC_WD20EARX-00PASB0_WD-WMAZA5704129
Feb 23 17:03:16 Tower kernel: md: import disk4: [65,0] (sdq) WDC_WD20EARX-00PASB0_WD-WMAZA5704129 size: 1953514552
Feb 23 17:03:16 Tower kernel: mdcmd (6): import 5 8,80 1953514552 WDC_WD20EARX-00PASB0_WD-WMAZA5544691
Feb 23 17:03:16 Tower kernel: md: import disk5: [8,80] (sdf) WDC_WD20EARX-00PASB0_WD-WMAZA5544691 size: 1953514552
Feb 23 17:03:16 Tower kernel: mdcmd (7): import 6 8,240 1953514552 WDC_WD20EARS-00S8B1_WD-WCAVY2854226
Feb 23 17:03:16 Tower kernel: md: import disk6: [8,240] (sdp) WDC_WD20EARS-00S8B1_WD-WCAVY2854226 size: 1953514552
Feb 23 17:03:16 Tower kernel: mdcmd (: import 7 8,48 1953514552 Hitachi_HDS5C3020ALA632_ML0220F30YRS3D
Feb 23 17:03:16 Tower kernel: md: import disk7: [8,48] (sdd) Hitachi_HDS5C3020ALA632_ML0220F30YRS3D size: 1953514552
Feb 23 17:03:16 Tower kernel: mdcmd (9): import 8 8,128 1953514552 SAMSUNG_HD204UI_S2H7J1AB121854
Feb 23 17:03:16 Tower kernel: md: import disk8: [8,128] (sdi) SAMSUNG_HD204UI_S2H7J1AB121854 size: 1953514552
Feb 23 17:03:16 Tower kernel: mdcmd (10): import 9 8,176 1953514552 SAMSUNG_HD204UI_S2H7J1BB122853
Feb 23 17:03:16 Tower kernel: md: import disk9: [8,176] (sdl) SAMSUNG_HD204UI_S2H7J1BB122853 size: 1953514552
Feb 23 17:03:16 Tower kernel: mdcmd (11): import 10 8,64 1953514552 WDC_WD20EARS-98MVWB0_WD-WCAZAF856890
Feb 23 17:03:16 Tower kernel: md: import disk10: [8,64] (sde) WDC_WD20EARS-98MVWB0_WD-WCAZAF856890 size: 1953514552
Feb 23 17:03:16 Tower kernel: mdcmd (12): import 11 8,96 976762552 WDC_WD10EAVS-00D7B1_WD-WCAU46419797
Feb 23 17:03:16 Tower kernel: md: import disk11: [8,96] (sdg) WDC_WD10EAVS-00D7B1_WD-WCAU46419797 size: 976762552
Feb 23 17:03:16 Tower kernel: mdcmd (13): import 12 8,32 732574552 WDC_WD7500AYYS-01RCA0_WD-WCAPT0364831
Feb 23 17:03:16 Tower kernel: md: import disk12: [8,32] (sdc) WDC_WD7500AYYS-01RCA0_WD-WCAPT0364831 size: 732574552
Feb 23 17:03:16 Tower kernel: mdcmd (14): import 13 8,160 625131832 WDC_WD6400AAKS-75A7B0_WD-WMASY1189690
Feb 23 17:03:16 Tower kernel: md: import disk13: [8,160] (sdk) WDC_WD6400AAKS-75A7B0_WD-WMASY1189690 size: 625131832
Feb 23 17:03:16 Tower kernel: mdcmd (15): import 14 8,224 488386552 ST3500630AS_6QG2NPZQ
Feb 23 17:03:16 Tower emhttp: shcmd (8454): /usr/local/sbin/emhttp_event driver_loaded
Feb 23 17:03:16 Tower kernel: md: import disk14: [8,224] (sdo) ST3500630AS_6QG2NPZQ size: 488386552
Feb 23 17:03:16 Tower kernel: mdcmd (16): import 15 0,0
Feb 23 17:03:16 Tower kernel: mdcmd (17): import 16 0,0
Feb 23 17:03:16 Tower kernel: mdcmd (18): import 17 0,0
Feb 23 17:03:16 Tower kernel: mdcmd (19): import 18 0,0
Feb 23 17:03:16 Tower kernel: mdcmd (20): import 19 0,0
Feb 23 17:03:16 Tower kernel: mdcmd (21): import 20 0,0
Feb 23 17:03:16 Tower kernel: mdcmd (22): import 21 0,0
Feb 23 17:03:16 Tower kernel: mdcmd (23): import 22 0,0
Feb 23 17:03:16 Tower kernel: mdcmd (24): import 23 0,0
Feb 23 17:03:16 Tower emhttp_event: driver_loaded
Feb 23 17:03:17 Tower emhttp: shcmd (8455): rmmod md-mod |& logger
Feb 23 17:03:17 Tower emhttp: shcmd (8456): modprobe md-mod super=/boot/config/super.dat slots=24 |& logger
Feb 23 17:03:17 Tower kernel: md: unRAID driver removed
Feb 23 17:03:17 Tower emhttp: shcmd (8457): udevadm settle
Feb 23 17:03:17 Tower emhttp: Device inventory:
Feb 23 17:03:17 Tower emhttp: Corsair_Force_GT_1228793200001494045B (sda) 234431064
Feb 23 17:03:17 Tower emhttp: WDC_WD20EARX-00PASB0_WD-WMAZA5704129 (sdq) 1953514584
Feb 23 17:03:17 Tower emhttp: WDC_WD7500AYYS-01RCA0_WD-WCAPT0364831 (sdc) 732574584
Feb 23 17:03:17 Tower emhttp: Hitachi_HDS5C3020ALA632_ML0220F30YRS3D (sdd) 1953514584
Feb 23 17:03:17 Tower emhttp: WDC_WD20EARS-98MVWB0_WD-WCAZAF856890 (sde) 1953514584
Feb 23 17:03:17 Tower emhttp: WDC_WD20EARX-00PASB0_WD-WMAZA5544691 (sdf) 1953514584
Feb 23 17:03:17 Tower emhttp: WDC_WD10EAVS-00D7B1_WD-WCAU46419797 (sdg) 976762584
Feb 23 17:03:17 Tower emhttp: WDC_WD30EFRX-68AX9N0_WD-WMC1T0638976 (sdh) 2930266584
Feb 23 17:03:17 Tower kernel: md: unRAID driver 2.1.5 installed
Feb 23 17:03:17 Tower emhttp: SAMSUNG_HD204UI_S2H7J1AB121854 (sdi) 1953514584
Feb 23 17:03:17 Tower emhttp: WDC_WD30EFRX-68AX9N0_WD-WMC1T0453360 (sdj) 2930266584
Feb 23 17:03:17 Tower emhttp: WDC_WD6400AAKS-75A7B0_WD-WMASY1189690 (sdk) 625131864
Feb 23 17:03:17 Tower emhttp: SAMSUNG_HD204UI_S2H7J1BB122853 (sdl) 1953514584
Feb 23 17:03:17 Tower emhttp: WDC_WD30EFRX-68AX9N0_WD-WMC1T0059716 (sdm) 2930266584
Feb 23 17:03:17 Tower emhttp: WDC_WD30EFRX-68AX9N0_WD-WMC1T0117263 (sdn) 2930266584
Feb 23 17:03:17 Tower emhttp: ST3500630AS_6QG2NPZQ (sdo) 488386584
Feb 23 17:03:17 Tower emhttp: WDC_WD20EARS-00S8B1_WD-WCAVY2854226 (sdp) 1953514584
Feb 23 17:03:17 Tower kernel: mdcmd (1): import 0 8,208 2930266532 WDC_WD30EFRX-68AX9N0_WD-WMC1T0117263
Feb 23 17:03:17 Tower kernel: md: import disk0: [8,208] (sdn) WDC_WD30EFRX-68AX9N0_WD-WMC1T0117263 size: 2930266532
Feb 23 17:03:17 Tower kernel: mdcmd (2): import 1 8,192 2930266532 WDC_WD30EFRX-68AX9N0_WD-WMC1T0059716
Feb 23 17:03:17 Tower kernel: md: import disk1: [8,192] (sdm) WDC_WD30EFRX-68AX9N0_WD-WMC1T0059716 size: 2930266532
Feb 23 17:03:17 Tower kernel: mdcmd (3): import 2 8,144 2930266532 WDC_WD30EFRX-68AX9N0_WD-WMC1T0453360
Feb 23 17:03:17 Tower kernel: md: import disk2: [8,144] (sdj) WDC_WD30EFRX-68AX9N0_WD-WMC1T0453360 size: 2930266532
Feb 23 17:03:17 Tower kernel: mdcmd (4): import 3 8,112 2930266532 WDC_WD30EFRX-68AX9N0_WD-WMC1T0638976
Feb 23 17:03:17 Tower kernel: md: import disk3: [8,112] (sdh) WDC_WD30EFRX-68AX9N0_WD-WMC1T0638976 size: 2930266532
Feb 23 17:03:17 Tower kernel: mdcmd (5): import 4 65,0 1953514552 WDC_WD20EARX-00PASB0_WD-WMAZA5704129
Feb 23 17:03:17 Tower kernel: md: import disk4: [65,0] (sdq) WDC_WD20EARX-00PASB0_WD-WMAZA5704129 size: 1953514552
Feb 23 17:03:17 Tower kernel: mdcmd (6): import 5 8,80 1953514552 WDC_WD20EARX-00PASB0_WD-WMAZA5544691
Feb 23 17:03:17 Tower kernel: md: import disk5: [8,80] (sdf) WDC_WD20EARX-00PASB0_WD-WMAZA5544691 size: 1953514552
Feb 23 17:03:17 Tower kernel: mdcmd (7): import 6 8,240 1953514552 WDC_WD20EARS-00S8B1_WD-WCAVY2854226
Feb 23 17:03:17 Tower kernel: md: import disk6: [8,240] (sdp) WDC_WD20EARS-00S8B1_WD-WCAVY2854226 size: 1953514552
Feb 23 17:03:17 Tower kernel: mdcmd (: import 7 8,48 1953514552 Hitachi_HDS5C3020ALA632_ML0220F30YRS3D
Feb 23 17:03:17 Tower kernel: md: import disk7: [8,48] (sdd) Hitachi_HDS5C3020ALA632_ML0220F30YRS3D size: 1953514552
Feb 23 17:03:17 Tower kernel: mdcmd (9): import 8 8,128 1953514552 SAMSUNG_HD204UI_S2H7J1AB121854
Feb 23 17:03:17 Tower kernel: md: import disk8: [8,128] (sdi) SAMSUNG_HD204UI_S2H7J1AB121854 size: 1953514552
Feb 23 17:03:17 Tower kernel: mdcmd (10): import 9 8,176 1953514552 SAMSUNG_HD204UI_S2H7J1BB122853
Feb 23 17:03:17 Tower kernel: md: import disk9: [8,176] (sdl) SAMSUNG_HD204UI_S2H7J1BB122853 size: 1953514552
Feb 23 17:03:17 Tower kernel: mdcmd (11): import 10 8,64 1953514552 WDC_WD20EARS-98MVWB0_WD-WCAZAF856890
Feb 23 17:03:17 Tower kernel: md: import disk10: [8,64] (sde) WDC_WD20EARS-98MVWB0_WD-WCAZAF856890 size: 1953514552
Feb 23 17:03:17 Tower kernel: mdcmd (12): import 11 8,96 976762552 WDC_WD10EAVS-00D7B1_WD-WCAU46419797
Feb 23 17:03:17 Tower kernel: md: import disk11: [8,96] (sdg) WDC_WD10EAVS-00D7B1_WD-WCAU46419797 size: 976762552
Feb 23 17:03:17 Tower kernel: mdcmd (13): import 12 8,32 732574552 WDC_WD7500AYYS-01RCA0_WD-WCAPT0364831
Feb 23 17:03:17 Tower kernel: md: import disk12: [8,32] (sdc) WDC_WD7500AYYS-01RCA0_WD-WCAPT0364831 size: 732574552
Feb 23 17:03:17 Tower kernel: mdcmd (14): import 13 8,160 625131832 WDC_WD6400AAKS-75A7B0_WD-WMASY1189690
Feb 23 17:03:17 Tower kernel: md: import disk13: [8,160] (sdk) WDC_WD6400AAKS-75A7B0_WD-WMASY1189690 size: 625131832
Feb 23 17:03:17 Tower kernel: mdcmd (15): import 14 8,224 488386552 ST3500630AS_6QG2NPZQ
Feb 23 17:03:17 Tower kernel: md: import disk14: [8,224] (sdo) ST3500630AS_6QG2NPZQ size: 488386552
Feb 23 17:03:17 Tower kernel: mdcmd (16): import 15 0,0
Feb 23 17:03:17 Tower kernel: mdcmd (17): import 16 0,0
Feb 23 17:03:17 Tower kernel: mdcmd (18): import 17 0,0
Feb 23 17:03:17 Tower kernel: mdcmd (19): import 18 0,0
Feb 23 17:03:17 Tower kernel: mdcmd (20): import 19 0,0
Feb 23 17:03:17 Tower kernel: mdcmd (21): import 20 0,0
Feb 23 17:03:17 Tower kernel: mdcmd (22): import 21 0,0
Feb 23 17:03:17 Tower kernel: mdcmd (23): import 22 0,0
Feb 23 17:03:17 Tower kernel: mdcmd (24): import 23 0,0
Feb 23 17:03:17 Tower emhttp: shcmd (8458): /usr/local/sbin/emhttp_event driver_loaded
Feb 23 17:03:17 Tower emhttp_event: driver_loaded
Feb 23 17:03:18 Tower kernel: emhttp[26559]: segfault at 676e696e ip b7485a6d sp bfd92650 error 4 in libc-2.11.1.so[b7442000+15c000]

Link to post
  • Replies 2.8k
  • Created
  • Last Reply

Top Posters In This Topic

good idea, remove all SF, directories, config files and then download SF zip again (it was updated a couple days after it was released, not sure you got the updated version).

 

IMO - I would go back RC11, which is the offical current RC.  If RC11a was the current one, there would be a thread with that title in the Announcement section and the RC11 thread would no longer be the active one.  You would have go read through the thread again, but 11a was specific for just a couple of users who had specific issues.

Link to post

Just wanted to say this is an amazing plugin. Is there any reason I would need to keep unMenu also installed? Just a quick browse through it seems like I get everything and more with SF.

 

Also for those that want to get rid of one of the last 'default' icons (the disk health) I made this

apcel.png

Just rename to "simpleFeatures.disk.health" on save

 

 

Edit: One possible bug I noticed. With the email notification on I am receiving emails correctly but I am also getting updates about the array spun down. I have this option to "No" under "Setup Email".

Link to post

Just wanted to say this is an amazing plugin. Is there any reason I would need to keep unMenu also installed? Just a quick browse through it seems like I get everything and more with SF.

 

Also for those that want to get rid of one of the last 'default' icons (the disk health) I made this

apcel.png

Just rename to "simpleFeatures.disk.health" on save

 

 

Edit: One possible bug I noticed. With the email notification on I am receiving emails correctly but I am also getting updates about the array spun down. I have this option to "No" under "Setup Email".

 

Well, opinions are like  ( o ) 's so I'm sure everyone will have one.  I used and really liked unmenu, but decided to stick with SF.  With this recent upgrade, it's webgui is just awsome.  About the only thing I miss from unmenu is that it would list packages and if you selected them, it would go download and even install them.  That part is missing in SF.  That said, you just have to find the packages you want, then drop them in the appropriate folder.  See my sig for other plugins I use.  From what I've read, there is no reason you can't use both.  I just decided that SF with a few other packages/ plugins gets it down for me.

 

Thanks for the icon, color icons are so much better.  I would vote this icon (along with the other color icons) be added to the core SF zip file.

Link to post

preclear package has been removed per the script author's request....

 

Myk

An explanation from Joe L would be nice. I believe he also wrote the cache dirs script, I assume he wants that removed as well?

 

I still see the preclear package in the download. ....

 

Sent from my SGH-T889 using Tapatalk 2

 

Link to post

preclear package has been removed per the script author's request....

 

Myk

An explanation from Joe L would be nice. I believe he also wrote the cache dirs script, I assume he wants that removed as well?

 

I still see the preclear package in the download. ....

 

Sent from my SGH-T889 using Tapatalk 2

 

Right. That's why I was confused about the file not being able to download. Personally I don't see why it's a problem to have it included with Simple Features but I didn't write it either so I guess if the creator doesn't like it then that's a good enough reason.

Link to post

preclear package has been removed per the script author's request....

 

Myk

An explanation from Joe L would be nice. I believe he also wrote the cache dirs script, I assume he wants that removed as well?

 

I still see the preclear package in the download. ....

 

Sent from my SGH-T889 using Tapatalk 2

 

the plugin might still be avail, but the program download is no longer avail that the plugin looks for....

 

Myk

 

Link to post

Hi there, first of all thank you for this wonderful script.

I'm trying to get my server sleep automatically, so i selected monitor all disk but cache, and I also need to set a threshold for network traffic since i use Sabnzbd, but I can't set any value any bug or suggestion??? thanks in advance.

no one have a solution?

Link to post

preclear package has been removed per the script author's request....

 

Myk

An explanation from Joe L would be nice. I believe he also wrote the cache dirs script, I assume he wants that removed as well?

 

I still see the preclear package in the download. ....

 

Sent from my SGH-T889 using Tapatalk 2

 

the plugin might still be avail, but the program download is no longer avail that the plugin looks for....

 

Myk

 

I hope it wasn't because of any bugs or issues running preclear from SF as I'm currently clearing disks with it now. I personally have found this a great and easy way of running preclear and getting status updates.

Link to post

Also for those that want to get rid of one of the last 'default' icons (the disk health) I made this

apcel.png

Just rename to "simpleFeatures.disk.health" on save

 

I can't get this icon to show up.  When I select Health tab, then see Disk Health, it still shows the b&w heart icon.  I have "Section Icons" set to YES and I've cleared my cache.  Tried with both ei9 and chrome.  I also noticed that there are other icons I can't find in the webgui, like the "webgui" icon itself. 

 

Is there a place I have to enable these that I missed somewhere?  I've already looked under SF settings and Display Settings.

 

Another topic, what is the best way to get a full Smart health report for a specific disk?  I'm about to replace a one of two smaller drives and I want to see the total hours so I can remove the one with the most.

 

Thanks!

Link to post

Just noticed this error, not sure exactly how to proceed since I'm a linux n00b

 

 Warning: strftime(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Los_Angeles' for 'PST/-8.0/no DST' instead in /usr/local/emhttp/plugins/webGui/template.php on line 41 Sat Feb 23 11:08:56 2013 PST

 

Changes from 5.0-rc10 to 5.0-rc11

---------------------------------

...

- emhttp: default timeZone "America/Los_Angeles" (eliminate first-boot error message)

...

 

Default set by Tom now when first setting up unRAID as none was set previously. Once you bring up unRAID for the first time you should then go ahead and set up time zone, etc... so this should go away.

 

Link to post

I can't get this icon to show up.  When I select Health tab, then see Disk Health, it still shows the b&w heart icon.  I have "Section Icons" set to YES and I've cleared my cache.  Tried with both ei9 and chrome.  I also noticed that there are other icons I can't find in the webgui, like the "webgui" icon itself. 

 

Is there a place I have to enable these that I missed somewhere?  I've already looked under SF settings and Display Settings.

 

Another topic, what is the best way to get a full Smart health report for a specific disk?  I'm about to replace a one of two smaller drives and I want to see the total hours so I can remove the one with the most.

 

Thanks!

 

Nope you havent missed it anywhere. The selection icons you are looking at are pulled from the .txz files. I am using the icon to replace the 'disk' images on the health page, though I do want to change the black and white heart like you.

 

If you want to change the disk images with 7zip do "Open Archive" on "simpleFeatures.disk.health-1.0.11-i486-1.txz" then just copy and replace the icon here:

    "\simpleFeatures.disk.health-1.0.11-i486-1.txz\simpleFeatures.disk.health-1.0.11-i486-1.tar\usr\local\emhttp\plugins\simpleFeatures.diskHealth\images\disk.png"

 

If you want to change the black and white heart that icon is here:

"\simpleFeatures.disk.health-1.0.11-i486-1.txz\simpleFeatures.disk.health-1.0.11-i486-1.tar\usr\local\emhttp\plugins\simpleFeatures\icons\disk_health.png"

 

Keep in mind the head would need to be resized.

 

 

I am not exactly sure where the WebGUI.png or the simpleFeatures.disk.health.png are being displayed at.

Link to post

Pretty sure that this is not an issue but I'm not sure if it is an expected result...

 

I just added a brand new drive to the array and it is completely empty.  When I click the folder icon for it to see contents of the drive, the following error is produced:

 

Index of /mnt/disk7

Warning: array_fill(): Number of elements must be positive in /usr/local/emhttp/plugins/indexer/Browse.php on line 25 Warning: Invalid argument supplied for foreach() in /usr/local/emhttp/plugins/indexer/Browse.php on line 40
Warning: array_multisort(): Argument #5 is expected to be an array or a sort flag in /usr/local/emhttp/plugins/indexer/Browse.php on line 44

Type Name Size Last Modified 

Parent Directory   
Warning: Invalid argument supplied for foreach() in /usr/local/emhttp/plugins/indexer/Browse.php on line 178  

 

I'm pretty sure that this does not happen in the default GUI.

 

BTW...my CPU and MB temps are also reported as 32F all the time.

 

John

Link to post

Also for those that want to get rid of one of the last 'default' icons (the disk health) I made this

apcel.png

Just rename to "simpleFeatures.disk.health" on save

 

I can't get this icon to show up.  When I select Health tab, then see Disk Health, it still shows the b&w heart icon.  I have "Section Icons" set to YES and I've cleared my cache.  Tried with both ei9 and chrome.  I also noticed that there are other icons I can't find in the webgui, like the "webgui" icon itself. 

 

Is there a place I have to enable these that I missed somewhere?  I've already looked under SF settings and Display Settings.

 

Another topic, what is the best way to get a full Smart health report for a specific disk?  I'm about to replace a one of two smaller drives and I want to see the total hours so I can remove the one with the most.

 

Thanks!

 

simpleFeatures.disk.health.png in /boot/plugins/simpleFeatures

 

Myk

 

Link to post

ok, I have a couple of display problems with the latest SF - this happens in both my FF and Chrome browsers....

 

1st, Disk Stats (screen1.png) - displays fine, but if I go to System Stats, and then back to Disk Stats, the bottom is cut off right after the flash drive line (screen2.png).  If I reload the page, the bottom will display again time after time until I display the System Stats then its cutoff again.

 

2nd, after a time frame I have not been able to track down yet - I get a flat line on my network in System Stats, it never comes back to life unless I reboot, and then eventually it will disappear again.

 

now 3rd?

 

Which I think #2 is related to #1, but if you look at system stats pane and compare to the disk stats pane where the bottom is cut off, they are the same height, but a correct disk stats pane is taller than the system stats pane so something is shortening the graphic after displaying system stats I think....

 

Thanks

Myk

screen1.png.5db38048eb8b43a21cae65f0b1a654b9.png

screen2.png.892cc40915f0e09b80461f5ad6d8be4a.png

screen3.png.84f46e19d9ddc579f2673e458be2b4c6.png

Link to post

Please consider including openssl-solibs with your email notify plugin.

 

Without this patch the 0.9.8 versions of libssl and libcrypto get deleted, then both wget and emhttpd fail to run due to missing shared object. I pulled this fix from the openvpn plugin.

 

Cheers,

Greg

 

--- simpleFeatures.email.notify-1.0.10-noarch-1.plg.orig	2013-02-24 17:00:28.000000000 -0500
+++ simpleFeatures.email.notify-1.0.10-noarch-1.plg	2013-02-24 17:03:05.000000000 -0500
@@ -35,6 +35,7 @@
  /boot/plugins/simpleFeatures/simpleFeatures.email.notify-0.0.0-i486-1.txz      # source code
  /boot/plugins/simpleFeatures/simpleFeatures.email.notify.png                   # icon file

+ /boot/packages/openssl-solibs-1.0.1c-i486-3.txz                                # openssl library
  /boot/packages/openssl-1.0.1c-i486-3.txz                                       # openssl library

  /boot/config/simpleFeatures/simpleFeatures.email.notify.cfg                    # non-volatile storage
@@ -83,6 +84,11 @@
<LOCAL>&plg;/simpleFeatures.&plugin;.png</LOCAL>
</FILE>

+<FILE Name="/boot/packages/openssl-solibs-1.0.1c-i486-3.txz" Run="upgradepkg --install-new">
+<URL>&url;/a/openssl-solibs-1.0.1c-i486-3.txz</URL>
+<MD5>3ba713c7de0e4248066f2cb114401caf</MD5>
+</FILE>
+
<FILE Name="&pkg;/openssl-1.0.1c-i486-3.txz" Run="upgradepkg --install-new">
<URL>&url;/n/openssl-1.0.1c-i486-3.txz</URL>
<MD5>4655f29369cc56a59b961a8709d53a48</MD5>

Link to post

2nd, after a time frame I have not been able to track down yet - I get a flat line on my network in System Stats, it never comes back to life unless I reboot, and then eventually it will disappear again.

 

I have the same problem in v1.0.5 of Simplefeatures plugin

Link to post

Temp shows up as blank for me also on RC11/SF1.0.11. Output of "sensors -u" on my HP Microserver N40L:

 

k10temp-pci-00c3
Adapter: PCI adapter
temp1:
  temp1_input: 34.000
  temp1_max: 70.000
  temp1_crit: 100.000
  temp1_crit_hyst: 95.000

 

CPU is an AMD Turion II Neo N40L.

 

As an aside, System Profiler->Processor Info incorrectly lists the current/maximum speed of this CPU as 1500/2200MHz respectively. Looking at proc/cpuinfo, the correct info 800/1500MHz is there. Not sure if this is SF related...

Link to post

Just noticed this error, not sure exactly how to proceed since I'm a linux n00b

 

 Warning: strftime(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Los_Angeles' for 'PST/-8.0/no DST' instead in /usr/local/emhttp/plugins/webGui/template.php on line 41 Sat Feb 23 11:08:56 2013 PST

 

Changes from 5.0-rc10 to 5.0-rc11

---------------------------------

...

- emhttp: default timeZone "America/Los_Angeles" (eliminate first-boot error message)

...

 

Default set by Tom now when first setting up unRAID as none was set previously. Once you bring up unRAID for the first time you should then go ahead and set up time zone, etc... so this should go away.

 

Perhaps the solution would be to set the time zone, THEN put on SimpleFeatures.

Link to post

preclear package has been removed per the script author's request....

 

Myk

An explanation from Joe L would be nice. I believe he also wrote the cache dirs script, I assume he wants that removed as well?

 

I still see the preclear package in the download. ....

 

Sent from my SGH-T889 using Tapatalk 2

 

the plugin might still be avail, but the program download is no longer avail that the plugin looks for....

 

Myk

 

I hope it wasn't because of any bugs or issues running preclear from SF as I'm currently clearing disks with it now. I personally have found this a great and easy way of running preclear and getting status updates.

 

Is there any update on the reasons behind this?

 

I'm another who has found this functionality extremely useful!

Link to post

preclear package has been removed per the script author's request....

 

Myk

An explanation from Joe L would be nice. I believe he also wrote the cache dirs script, I assume he wants that removed as well?

 

I still see the preclear package in the download. ....

 

Sent from my SGH-T889 using Tapatalk 2

 

the plugin might still be avail, but the program download is no longer avail that the plugin looks for....

 

Myk

 

I hope it wasn't because of any bugs or issues running preclear from SF as I'm currently clearing disks with it now. I personally have found this a great and easy way of running preclear and getting status updates.

 

Is there any update on the reasons behind this?

 

I'm another who has found this functionality extremely useful!

 

Personally I'll continue to use the command line & screen to start the process, but, use the site to monitor it. Monitoring works fine with screen & the default script off Joe.

Link to post

I'm not seeing the active streams plugin icon in the GUI. Checking the log shows this:

 

Feb 25 17:35:46 unRaid logger: Verifying package simpleFeatures.active.streams-1.0.10-i486-1.txz.

Feb 25 17:35:46 unRaid logger: Installing package simpleFeatures.active.streams-1.0.10-i486-1.txz:

Feb 25 17:35:46 unRaid logger: PACKAGE DESCRIPTION:

Feb 25 17:35:46 unRaid logger: WARNING:  Package has not been created with 'makepkg'

Feb 25 17:35:46 unRaid logger: Package simpleFeatures.active.streams-1.0.10-i486-1.txz installed.

 

Could second to last line have something to do with it?

Rest of the plugins are working.

Link to post

I'm not seeing the active streams plugin icon in the GUI. Checking the log shows this:

 

Feb 25 17:35:46 unRaid logger: Verifying package simpleFeatures.active.streams-1.0.10-i486-1.txz.

Feb 25 17:35:46 unRaid logger: Installing package simpleFeatures.active.streams-1.0.10-i486-1.txz:

Feb 25 17:35:46 unRaid logger: PACKAGE DESCRIPTION:

Feb 25 17:35:46 unRaid logger: WARNING:  Package has not been created with 'makepkg'

Feb 25 17:35:46 unRaid logger: Package simpleFeatures.active.streams-1.0.10-i486-1.txz installed.

 

Could second to last line have something to do with it?

Rest of the plugins are working.

 

Are you sure you're looking in the right place?

http://tower/Utils/ActiveStreams

Link to post
  • Squid locked this topic
Guest
This topic is now closed to further replies.