Cyklone Posted November 10, 2023 Share Posted November 10, 2023 (edited) 32 minutes ago, BoKKeR said: Are you able to wipe the /config folder and start again? Yes, have done several times, as well as re-installing it. It re-creates the mqttKeys and servers.json files after I login on the WebGui page. But still won't post anything to the mqtt broker. I'm using the bokker/unraidapi-re:6.12-naming repository. Edited November 10, 2023 by Cyklone Quote Link to comment
syper Posted November 14, 2023 Share Posted November 14, 2023 Good morning, For my part still doesn't work! The unraid web interface becomes slow and when I stop the container the following errors appear in the logs Quote Link to comment
ByteHeaven Posted November 21, 2023 Share Posted November 21, 2023 (edited) There is still some problem with 6.12.4? I reupdated back to 6.12.4 some time ago, and now: UI completely unresponsive, it takes ages to load ui pages. When I managed to get to docker page, and shut down this API docker: everything works fine.. maybe need to roll back to 6.12.3, but just let you know, problem still is there. -edit- and yes, after downgrade to 6.12.3 everything seems to be responsive again. Edited November 22, 2023 by ByteHeaven Quote Link to comment
stubennatter Posted November 22, 2023 Share Posted November 22, 2023 is there any option to collect the HDD temps? Quote Link to comment
mattw Posted November 23, 2023 Share Posted November 23, 2023 I use HA Companion on android. I can wake my main and backup servers from a widget, but because there is not a switch for shutdown, I am unable to power off my servers. I assume that I am going to have to add an ssh command to HA as the power off? Is there a better way? I would also still like to get cpu temp in via the api... is that a roadmap item? Otherwise works really well. Quote Link to comment
skank Posted November 25, 2023 Share Posted November 25, 2023 Follow mode, Just installed it, hopefully this will be maintained ! Good works ! Quote Link to comment
skank Posted November 25, 2023 Share Posted November 25, 2023 Is there a reason why all are buttons now instead of switches? In home assistant , what do i do then? Turn off the button using call service button.press? Quote Link to comment
skank Posted November 25, 2023 Share Posted November 25, 2023 On 11/23/2023 at 5:47 AM, mattw said: I use HA Companion on android. I can wake my main and backup servers from a widget, but because there is not a switch for shutdown, I am unable to power off my servers. I assume that I am going to have to add an ssh command to HA as the power off? Is there a better way? I would also still like to get cpu temp in via the api... is that a roadmap item? Otherwise works really well. I just noticed that all are called buttons now instead of switches. So you should use the service call: button.press i think So then u can turn it off. Quote Link to comment
BoKKeR Posted November 25, 2023 Author Share Posted November 25, 2023 @syper @ByteHeaven could you try using the MQTTRefreshRate=60 env variable. Setting the refresh to every 60 seconds or even 120. Instead of the default 20 seconds. Also close the website since I noticed that the web browser has its own 3 second times, each tab would start a new 3s process. I will have to rewrite that... I suspect that when the server/ui becomes slow the unraid-api does not back off and just queues up more tasks ending up slowing down the UI indefinitely. I would like to rewrite that whole logic but my current fix would require an external redis service. Or implement some sort of logic for exponential backoff https://stackoverflow.com/a/52772266/2515404 @skank Does the entity show up as following? Quote Link to comment
skank Posted November 25, 2023 Share Posted November 25, 2023 2 hours ago, BoKKeR said: @skank Does the entity show up as following? Some yes, but not the power_off Quote Link to comment
ByteHeaven Posted November 26, 2023 Share Posted November 26, 2023 On 11/25/2023 at 2:23 PM, BoKKeR said: @syper @ByteHeaven could you try using the MQTTRefreshRate=60 env variable. Setting the refresh to every 60 seconds or even 120. Instead of the default 20 seconds. Also close the website since I noticed that the web browser has its own 3 second times, each tab would start a new 3s process. I will have to rewrite that... I suspect that when the server/ui becomes slow the unraid-api does not back off and just queues up more tasks ending up slowing down the UI indefinitely. I would like to rewrite that whole logic but my current fix would require an external redis service. Or implement some sort of logic for exponential backoff https://stackoverflow.com/a/52772266/2515404 Thank you, I had the entire Unraid non responsive even after reboot through ssh (all dockers worked just fine, but no UI). Manually shut down Unraid-api through ssh and UI came responsive, trying now that 60 seconds... Just a stupid question, as I do not have a clue what that MQTTRefreshRate is, my need for this is: when electricity price goes over 18 euro cents, my HA from RPI4 shuts down cleanly Unraid through this. (and when price goes down again below that, same HA cuts down power on Meross plug after checking that power consumption is below 30 watts: thus Unraid IS shut down), counts to five and turns it back on, and server starts up... So, is that meaningful to have as low as possible so it works? Or can I through in something like 3600? Point being "poll for updates" for what? Does toggle "shut down this" works without poll? I do not need anything else from Unraid to my HA (this was only way I figured out how to get this working so it will automatically shutdown based on electricity price...) Quote Link to comment
syper Posted December 5, 2023 Share Posted December 5, 2023 (edited) On 11/25/2023 at 1:23 PM, BoKKeR said: @syper @ByteHeaven could you try using the MQTTRefreshRate=60 env variable. Setting the refresh to every 60 seconds or even 120. Instead of the default 20 seconds. Also close the website since I noticed that the web browser has its own 3 second times, each tab would start a new 3s process. I will have to rewrite that... I suspect that when the server/ui becomes slow the unraid-api does not back off and just queues up more tasks ending up slowing down the UI indefinitely. I would like to rewrite that whole logic but my current fix would require an external redis service. Or implement some sort of logic for exponential backoff https://stackoverflow.com/a/52772266/2515404 Hello, thank you for the answer my server becomes slow as soon as I start Unraid API even though I am not even opening the UI. Same with MQTTRefreshRate=60 env variable In log MQTT : Quote 2023-12-05 13:55:33: New connection from 192.168.0.100:58258 on port 1883. 2023-12-05 13:55:33: New client connected from 192.168.0.100:58258 as mqttjs_a72ea9d9 (p2, c1, k60, u'jimmy'). 2023-12-05 13:55:33: Client mqttjs_a72ea9d9 disconnected due to malformed packet. 2023-12-05 13:55:34: New connection from 192.168.0.100:58270 on port 1883. 2023-12-05 13:55:34: New client connected from 192.168.0.100:58270 as mqttjs_a72ea9d9 (p2, c1, k60, u'jimmy'). 2023-12-05 13:55:34: Client mqttjs_a72ea9d9 disconnected due to malformed packet. 2023-12-05 13:55:35: New connection from 192.168.0.100:58278 on port 1883. 2023-12-05 13:55:35: New client connected from 192.168.0.100:58278 as mqttjs_a72ea9d9 (p2, c1, k60, u'jimmy'). 2023-12-05 13:55:35: Client mqttjs_a72ea9d9 disconnected due to malformed packet. 2023-12-05 13:55:36: New connection from 192.168.0.100:58288 on port 1883. 2023-12-05 13:55:36: New client connected from 192.168.0.100:58288 as mqttjs_a72ea9d9 (p2, c1, k60, u'jimmy'). 2023-12-05 13:55:36: Client mqttjs_a72ea9d9 disconnected due to malformed packet. 2023-12-05 13:55:37: New connection from 192.168.0.100:58304 on port 1883. 2023-12-05 13:55:37: New client connected from 192.168.0.100:58304 as mqttjs_a72ea9d9 (p2, c1, k60, u'jimmy'). 2023-12-05 13:55:37: Client mqttjs_a72ea9d9 disconnected due to malformed packet. 2023-12-05 13:55:38: New connection from 192.168.0.100:36580 on port 1883. 2023-12-05 13:55:38: New client connected from 192.168.0.100:36580 as mqttjs_a72ea9d9 (p2, c1, k60, u'jimmy'). 2023-12-05 13:55:38: Client mqttjs_a72ea9d9 disconnected due to malformed packet. 2023-12-05 13:55:39: New connection from 192.168.0.100:36584 on port 1883. 2023-12-05 13:55:39: New client connected from 192.168.0.100:36584 as mqttjs_a72ea9d9 (p2, c1, k60, u'jimmy'). 2023-12-05 13:55:39: Client mqttjs_a72ea9d9 disconnected due to malformed packet. Edited December 5, 2023 by syper Quote Link to comment
mattw Posted December 10, 2023 Share Posted December 10, 2023 (edited) On 11/25/2023 at 5:25 AM, skank said: I just noticed that all are called buttons now instead of switches. So you should use the service call: button.press i think So then u can turn it off. So, the button service call works to shut down the server... and the WOL component turns it on just fine. This has allowed me to create and android widget that will power up/down my backup server! Here is my HA config that creates switch.backup ~~~ - platform: wake_on_lan mac: "BC:5F:F4:xx:xx:xx" name: "Backup" host: 192.168.1.101 broadcast_address: 192.168.1.255 turn_off: service: button.press data: {} target: entity_id: button.backup_server_backup_power_off ~~~ Edited December 10, 2023 by mattw Quote Link to comment
mkono87 Posted December 12, 2023 Share Posted December 12, 2023 Trying this out for the first time. Im on 6.12.6. Only a few things are showing up but im also getting 503 errors. Could this be because of the version of Unraid, something changed? Quote Link to comment
k11su Posted December 24, 2023 Share Posted December 24, 2023 On 12/12/2023 at 6:32 PM, mkono87 said: Trying this out for the first time. Im on 6.12.6. Only a few things are showing up but im also getting 503 errors. Could this be because of the version of Unraid, something changed? Exactly the same here. Quote Link to comment
chompy18 Posted January 1 Share Posted January 1 (edited) @BoKKeR First - I'd like ti thank you for this! It has a lot of usefulness I am using unraid 6.12.6 and latest container, everything works well for me. I was wondering if it is possible, in addition to the array info (utilization, free space, etc) to also get info about individual HDDs in the array - specifically space used + free and the HDD temperature - it would be great to implement an alert automation when unraid detects a HDD is too hot Plus - any information on the machine itself - CPU load, Memory, etc. - that would be awesome if possible Edited January 1 by chompy18 Quote Link to comment
chompy18 Posted January 1 Share Posted January 1 3 hours ago, chompy18 said: @BoKKeR First - I'd like ti thank you for this! It has a lot of usefulness I am using unraid 6.12.6 and latest container, everything works well for me. I was wondering if it is possible, in addition to the array info (utilization, free space, etc) to also get info about individual HDDs in the array - specifically space used + free and the HDD temperature - it would be great to implement an alert automation when unraid detects a HDD is too hot Plus - any information on the machine itself - CPU load, Memory, etc. - that would be awesome if possible I saw it is relatively simple to add the above by modifying `utils/extractServerDetails.ts` to extract the values - and I am happy to fork and implement, but unfortunately I was unable to run it locally running `npm run dev` - I am getting errors in `npm install` Are there any instructions on how to run this locally in dev mode? Quote Link to comment
BoKKeR Posted January 1 Author Share Posted January 1 I have seen some reports of it working and not working on 6.12.6, I am currently away from my computer so I can’t test it but please submit your dashboard html files after running the container with WRITE_HTML_OUTPUT=true and send them over to me in a PM since they are not anonymised. @k11su @mkono87 @chompy18 try running npm ci instead, alternatively check how the docker file is setup. The packages are broken since before I took over the fork I will have to revisit the Unraid dashboard getting slow once I find more time to write a backing off strategy Quote Link to comment
BlaM Posted January 27 Share Posted January 27 On 1/1/2024 at 8:55 AM, chompy18 said: @BoKKeR I was wondering if it is possible, in addition to the array info (utilization, free space, etc) to also get info about individual HDDs in the array - specifically space used + free and the HDD temperature - it would be great to implement an alert automation when unraid detects a HDD is too hot Plus - any information on the machine itself - CPU load, Memory, etc. - that would be awesome if possible Something I would be very interested in the "Power" values on the dashboard, especially the "UPS Load" (which is the amount of power the server is currently pulling from the UPS). <tbody title="Power Status" class="sortable" sort="7fd06ad571f773b4fcd62b5a2b604649"> <tr title=""><td><i class="fa fa-fw fa-close control tile" onclick="dismiss($(this))" title="Close Tile"></i><i class="fa fa-fw fa-chevron-up control openclose" onclick="openClose($(this))" title="Show/Hide Content"></i><i class="icon-ups f32"></i><div class="section">Power<br> <span><i class="ups fa fa-bar-chart"></i>UPS Model: </span><span id="ups_model">Back-UPS BX950MI</span><br></div> <a href="/Dashboard/Settings/UPSsettings" title="Go to UPS settings"><i class="fa fa-fw fa-cog control"></i></a> </td></tr> <tr title=""><td><span class="w36"><i class="ups fa fa-fw fa-plug"></i>UPS status:</span><span id="ups_status"><span class="green-text">Online</span></span></td></tr> <tr title=""><td><span class="w36"><i class="ups fa fa-fw fa-bars"></i>UPS Load: </span><span id="ups_loadpct"><span class="green-text">88 W (17 %)</span></span></td></tr> <tr title=""><td><span class="w36"><i class="ups fa fa-fw fa-battery"></i>Battery charge:</span><span id="ups_bcharge"><span class="green-text">100 %</span></span></td></tr> <tr title=""><td><span class="w36"><i class="ups fa fa-fw fa-clock-o"></i>Runtime left:</span><span id="ups_timeleft"><span class="green-text">24 minutes</span></span></td></tr> <tr title=""><td><span class="w36"><i class="ups fa fa-fw fa-bolt"></i>Nominal power:</span><span id="ups_nompower"><span class="green-text">520 W</span></span></td></tr> <tr title=""><td><span class="w36"><i class="ups fa fa-fw fa-ellipsis-h"></i>Output voltage:</span><span id="ups_outputv"><span>-</span></span></td></tr> </tbody> Quote Link to comment
light2089 Posted January 29 Share Posted January 29 Hi. Thanks for reviving this great tool! I have been getting mqtt warnings in HA, and I believe it's because the Version attribute isn't getting correctly parsed. Attaching screenshots for more clarity Quote Link to comment
light2089 Posted January 29 Share Posted January 29 Submitted a PR - it worked in my server running 6.12.6: Quote Link to comment
ABEIDO Posted February 1 Share Posted February 1 (edited) Bokker, any possible fix for getting rid of nchan error thats spamming the unraid log like crazy which came after last update: Also have a question if there is a possible fix for neededing rsetart container whenever HA is restarted, was working before last update. To add to above poster i also have issues with attributes on status sensor. Example of nchan error: Jan 29 05:28:42 UNRAID monitor: Stop running nchan processes Jan 29 05:29:15 UNRAID monitor: Stop running nchan processes Jan 29 05:29:48 UNRAID monitor: Stop running nchan processes Jan 29 05:30:21 UNRAID monitor: Stop running nchan processes Jan 29 05:30:54 UNRAID monitor: Stop running nchan processes Jan 29 05:31:28 UNRAID monitor: Stop running nchan processes Jan 29 05:32:01 UNRAID monitor: Stop running nchan processes Jan 29 05:32:34 UNRAID monitor: Stop running nchan processes Jan 29 05:33:07 UNRAID monitor: Stop running nchan processes Jan 29 05:33:40 UNRAID monitor: Stop running nchan processes Jan 29 05:34:13 UNRAID monitor: Stop running nchan processes Jan 29 05:34:46 UNRAID monitor: Stop running nchan processes Edited February 1 by ABEIDO Quote Link to comment
BoKKeR Posted February 1 Author Share Posted February 1 @BlaM I would like to add this also, but unfortunately I dont own a UPS, is there a way I can emulate a UPS? Since once a feature is implemented it has to be maintained going forward. @light2089 Thanks for finding this bug and opening a PR (I somehow didnt get a github notification). I cant reproduce it on my 2 systems running 6.12.6, Are you using any custom theme? Could you run the container with WRITE_HTML_OUTPUT=true and send me over the dashboard.html file from your /config folder in private? So I can find a version a code that works for all of us. @ABEIDO The logs are coming from unraid itself. Since the container needs to ping the dashboard there is no way this container can fix it. The unraid team might be able to help in the future how to surpress them. I will look into the HA problem Quote Link to comment
light2089 Posted February 1 Share Posted February 1 Thanks for checking. Just sent it your way. @BlaM - I use the APC UPS integration in HA to extract UPS information from my Unraid server: 1 Quote Link to comment
BoKKeR Posted February 1 Author Share Posted February 1 (edited) After the files from @light2089 I have fixed so the version returns an empty string in the meanwhile if the version is not found. I will investigate further since it works on my test machines and I suspect its some kind of a custom setting which hides the version on the main page Edited February 1 by BoKKeR Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.