Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Unraid OS version 6.12.5 available

Featured Replies

As I already had with 6.12.4, I cannot connect to my unraid server through his ipv6. I had downgraded to 6.12.3 until now for this reason (among others).

 

 root@unraid # ss -tlpn | grep :22 
tcp   LISTEN 0      128                         0.0.0.0:22         0.0.0.0:*    users:(("sshd",pid=24054,fd=3)) 

 

I don't know why it doesn't listen on [::]:22

 

Any idea ?

 

(But with this version, unlike v6.12.4, the ipv6 works with my docker containers.)

 

Edited by pbear

Update went smooth and without problems - thanks a lot 👍

  • Author
2 hours ago, pbear said:

As I already had with 6.12.4, I cannot connect to my unraid server through his ipv6. I had downgraded to 6.12.3 until now for this reason (among others).

 

 root@unraid # ss -tlpn | grep :22 
tcp   LISTEN 0      128                         0.0.0.0:22         0.0.0.0:*    users:(("sshd",pid=24054,fd=3)) 

 

I don't know why it doesn't listen on [::]:22

 

Any idea ?

 

(But with this version, unlike v6.12.4, the ipv6 works with my docker containers.)

 

 

Not much to go on there, we really need your diagnostics. The next time you upgrade, be sure to grab diagnostics and then start a new topic in general support where you detail the issue. It is very difficult to do back and forth support in this release thread.

4 hours ago, dlandon said:

You are referencing the remote share servers by IP address.  Any chance the IP address changed?  If the remote server does not have a static IP address, you are better off using the server name.

The ip address is static for the remote shares. It's not a device that's online frequently but typically I see that it's not mounted ..... After the update it showed as "not a valid configuration" and I had to remove and re-add.

48 minutes ago, Fffrank said:

After the update it showed as "not a valid configuration" and I had to remove and re-add.

It appears that you updated UD as part of the upgrade to 6.12.5.  There were some changes made in UD to detect issues in the configuration and show the invalid configuration if a problem is detected.  Removing and re-adding the remote share is the answer and fixes these problems.

17 hours ago, EthanBezz said:

 

Run this in the web terminal:

cat /etc/modprobe.d/zfs.conf

and you'll see:

# zfs data corruption mitigation, re: https://github.com/openzfs/zfs/issues/15526
options zfs zfs_dmu_offset_next_sync=0

 

Is this what I should see?

 

root@unRAID:~# cat /etc/modprobe.d/zfs.conf
zfs_dmu_offset_next_sync=0root@unRAID:~# 

 

Upgraded from 6.12.4 seemingly without issue.  Did a full shutdown this time instead of restarting.  System did not crash after upgrade reboot as it has been doing on all but one of the 6.12.x updates; after only the first reboot after an upgrade.

For reference, this has been my issue.  I did a shutdown this time and did not have the crash after reboot.

 

 

13 hours ago, pbear said:

As I already had with 6.12.4, I cannot connect to my unraid server through his ipv6. I had downgraded to 6.12.3 until now for this reason (among others).

 

 root@unraid # ss -tlpn | grep :22 
tcp   LISTEN 0      128                         0.0.0.0:22         0.0.0.0:*    users:(("sshd",pid=24054,fd=3)) 

 

I don't know why it doesn't listen on [::]:22

 

Any idea ?

 

(But with this version, unlike v6.12.4, the ipv6 works with my docker containers.)

 

i did encounter maybe the same?! similar issue to this after updating from 6.12.5-rc1 to 6.12.5.

Nothing(webgui, ssh, anything really) runs on ipv6 after you stop the array and then start the array again.

First bootup is fine oddly enough. It still lists that it actively listens on the adresses and ports but its absolutely dead. Gonna check on it later and post the diagnostics.

15 hours ago, ljm42 said:

 

Not much to go on there, we really need your diagnostics. The next time you upgrade, be sure to grab diagnostics and then start a new topic in general support where you detail the issue. It is very difficult to do back and forth support in this release thread.

Hello,

Well, I already did send my diagnostics file to the support by email, had opened a thread  and even opened a thread on discord.

The only answer I got was from the support (email) who adviced me to wait for the next release.

Anyway I updated my thread with extra infos and a new diganostic file.

 

Thanks,

Update to 6.12.5 went smoothly.  Thanks for all the hard work!

  • Author
10 hours ago, pbear said:

Hello,

Well, I already did send my diagnostics file to the support by email, had opened a thread  and even opened a thread on discord.

The only answer I got was from the support (email) who adviced me to wait for the next release.

Anyway I updated my thread with extra infos and a new diganostic file.

 

Sorry, I originally replied based on your post in this thread as it had no hints about the other communication.

 

I just commented on your thread, this issue will be resolved in the next release https://forums.unraid.net/topic/145859-after-upgrade-troubles-with-ipv6/#comment-1332834

 

  • Author
14 hours ago, Mainfrezzer said:

i did encounter maybe the same?! similar issue to this after updating from 6.12.5-rc1 to 6.12.5.

Nothing(webgui, ssh, anything really) runs on ipv6 after you stop the array and then start the array again.

First bootup is fine oddly enough. It still lists that it actively listens on the adresses and ports but its absolutely dead. Gonna check on it later and post the diagnostics.

 

Are you using a statically assigned IPv6 address? We just tracked down an issue related to that, although DHCP and SLAAC should work fine. This will be fixed in the next release:

https://forums.unraid.net/bug-reports/prereleases/bugs-with-ipv6-in-6125-rc1-r2742/?tab=comments#comment-26714

 

If you don't have a statically assigned IPv6 address, please start a new thread in general support and include your diagnostics along with a description of the problem.  This release thread is not meant for support.

Buttery smooth upgrade.

 

Noticing this in the logs related to HBA card. Not sure if important as no lockups.

 

Nov 30 22:42:35 Moulin-rouge kernel: phy-2:0: add: sas_addr(0x56c92bf0012727df), phy(0)
Nov 30 22:48:28 Moulin-rouge kernel: sd 2:0:1:0: [sdj] tag#6003 UNKNOWN(0x2003) Result: hostbyte=0x0b driverbyte=DRIVER_OK cmd_age=0s
Nov 30 22:48:28 Moulin-rouge kernel: sd 2:0:1:0: [sdj] tag#6003 CDB: opcode=0x85 85 06 20 00 00 00 00 00 00 00 00 00 00 40 e5 00
Nov 30 22:48:32 Moulin-rouge kernel: mpt3sas_cm0: log_info(0x31110f00): originator(PL), code(0x11), sub_code(0x0f00)
Nov 30 22:48:32 Moulin-rouge kernel: sd 2:0:1:0: [sdj] tag#6004 UNKNOWN(0x2003) Result: hostbyte=0x0b driverbyte=DRIVER_OK cmd_age=3s
Nov 30 22:48:32 Moulin-rouge kernel: sd 2:0:1:0: [sdj] tag#6004 CDB: opcode=0x85 85 06 20 00 00 00 00 00 00 00 00 00 00 40 98 00

 

Edited by dopeytree

On 11/29/2023 at 11:54 AM, ljm42 said:

 

You can just uninstall/reinstall the nvidia plugin

Missing nvidia driver plugin after upgrade 6.12.5 from 6.12.4.

After reinstalling nvidia-driver plugin,  unable to enable docker .

Roll back to 6.12.4, everything is fine again.

 

Updated to 6.12.5 without any issue.

Thanks to the team. :) 

14 hours ago, GavinChan said:

Missing nvidia driver plugin after upgrade 6.12.5 from 6.12.4.

If you stll have issues you should repost in the existing Nvidia plugin support thread. 

  • 4 months later...

Hey, I recently upgraded my version to 6.12.10 and started having issues and I wanted to see if 6.11.5 runs better. Now I cant get back to 6.12.5 and it doesnt seem to be on the download archive either. Is there any place I can still get this version or am I fucked?
Edit: found it on https://www.unraid.gutt.it/.. why isnt there an official archive???

Edited by mathiasdoe

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.