October 4, 201312 yr Author @Influencer You wouldn't happen to have your alt sickbeard plugin around still would you? I've taken a stab and trying to modify the current sickbeard plugin but not sure i've done it right. Here you go: https://dl.dropboxusercontent.com/u/1574928/Unraid%20Plugins/sickbeard_alt_unplugged.plg
October 4, 201312 yr Here you go: https://dl.dropboxusercontent.com/u/1574928/Unraid%20Plugins/sickbeard_alt_unplugged.plg Thanks! Much appreciated.
October 4, 201312 yr about Sickbeard i prefer for everyone 'https://github.com/mr-orange/Sick-Beard/tree/Pistachitos" Best build - new layout, automatical downloading subtitles from few services, unraring torrents if need
October 4, 201312 yr about Sickbeard i prefer for everyone 'https://github.com/mr-orange/Sick-Beard/tree/Pistachitos" Best build - new layout, automatical downloading subtitles from few services, unraring torrents if need This is certainly a good build and something that can already be used via the advanced install option. Sickbeard has been pretty dormant for a long time but positively there has been a lot of development in the last few weeks and even an update to master. That is the beauty of github.
October 5, 201312 yr Just moved my unraid server to an N54L with the stock 2GB RAM (I was running 4GB before). Move went fine (it's not the first time I've changed hardware). CouchPotato now keeps getting killed via OOM and I can't get it to stick. It seems only ever to be CP that gets killed, nothing else. I've ordered another 2GB stick to bring me back to 4GB, but surely 2GB is enough to run unraid, simplefeatures, CP, SAB, SB, subsonic, mysql, cach_dirs....isn't it? Any help/advice much appreciated! Syslog - http://pastebin.com/i0gpW58Q
October 5, 201312 yr Author Just moved my unraid server to an N54L with the stock 2GB RAM (I was running 4GB before). Move went fine (it's not the first time I've changed hardware). CouchPotato now keeps getting killed via OOM and I can't get it to stick. It seems only ever to be CP that gets killed, nothing else. I've ordered another 2GB stick to bring me back to 4GB, but surely 2GB is enough to run unraid, simplefeatures, CP, SAB, SB, subsonic, mysql, cach_dirs....isn't it? Any help/advice much appreciated! Syslog - http://pastebin.com/i0gpW58Q Depending on how much is being cached by cache_dir's, it might not be enough for all of those. One thing to check is if any of the plug-ins are installed/running from a disk or ram. If they are installed in default locations it is in ram and will fill up quickly
October 5, 201312 yr I'm having a strange issue lately with sabnzbd, when downloading episodes for The Big Bang Theory. (1080p web dl) Once the nzb enters sabnzbd's queue, it gets renamed by sab to: The Pacific.S07E03.The.Scavenger.Vortex.1080p.WEB-DL.DD5.1.H.264.par2 ... Again, this is NOT during a custom pre- or post script action, but the moment sab puts the nzb in it's queue. It doesn't matter if i place the nzb manually in sab's scanfolder, or use sickbeard, or send it to sab using a chrome extension directly. I'm only having this issue with TBBT at the moment. Last season was fine, those before as well... I've update to the latest version, to no avail.
October 5, 201312 yr Author I'm having a strange issue lately with sabnzbd, when downloading episodes for The Big Bang Theory. (1080p web dl) Once the nzb enters sabnzbd's queue, it gets renamed by sab to: The Pacific.S07E03.The.Scavenger.Vortex.1080p.WEB-DL.DD5.1.H.264.par2 ... Again, this is NOT during a custom pre- or post script action, but the moment sab puts the nzb in it's queue. It doesn't matter if i place the nzb manually in sab's scanfolder, or use sickbeard, or send it to sab using a chrome extension directly. I'm only having this issue with TBBT at the moment. Last season was fine, those before as well... I've update to the latest version, to no avail. That's an odd one, I can't reproduce it even with the same nzb as in your screenshot. I don't see any settings other than the pre or post scripts that look like they would affect this, but as you said you are not using any so I'm not sure
October 5, 201312 yr Just moved my unraid server to an N54L with the stock 2GB RAM (I was running 4GB before). Move went fine (it's not the first time I've changed hardware). CouchPotato now keeps getting killed via OOM and I can't get it to stick. It seems only ever to be CP that gets killed, nothing else. I've ordered another 2GB stick to bring me back to 4GB, but surely 2GB is enough to run unraid, simplefeatures, CP, SAB, SB, subsonic, mysql, cach_dirs....isn't it? Any help/advice much appreciated! Syslog - http://pastebin.com/i0gpW58Q Depending on how much is being cached by cache_dir's, it might not be enough for all of those. One thing to check is if any of the plug-ins are installed/running from a disk or ram. If they are installed in default locations it is in ram and will fill up quickly They're set-up as your guide recommends. Data dirs on cache, programs running /usr/ I think. I just went to check but looks like it's now killed of the webgui! cache_dirs I tweaked to 3 levels and pressure 200
October 6, 201312 yr That's an odd one, I can't reproduce it even with the same nzb as in your screenshot. I don't see any settings other than the pre or post scripts that look like they would affect this, but as you said you are not using any so I'm not sure I do use post processing scripts, but those only start AFTER the episode is downloaded, not when entering the queue. *found it...* It was a pre-script after all. Forgot about that one. I was using a soundex algorithm to determine phonetically what the target folder of the show/episode was, and that one caused the trouble... it would iterate through all tv shows on the unraid tv series share, and it would find 'the pacific' before it would find 'the big bang theory' and the soundex algorithm, which was designed for matching words and not sentences, would say that 'the' and ' the' were pretty much the same For now i've replaced it with a normal string comparison, i will rewrite the soundex match so it will compare sentences word by word and base it's score on how much individual words are matching
October 6, 201312 yr Here is the guide another user created for Deluge: http://lime-technology.com/forum/index.php?topic=24886.0 It'd be great to get it up and running. Would there be an easy way to use an older version? They're on version 1.3.6 but the tracker I use only allows 1.3.5.
October 7, 201312 yr Same here. Can't seem to get it to start back up again. For all with this problem, please check your sickbeard install directory, i had this same issue and my install directory of sickbeard was empty im make git clone myself and then start sickbeard from WebUI and working I thing some problem is with git (i found this) ernel: git-remote-http[26521]: segfault at 0 ip b74cd760 sp bfbd12d0 error 4 in libc-2.11.1.so[b7454000+15c000] Im suppose segfault is related with git version in sickbeard plugin from slackware 13.37 wich use other version libc (that why better is compile new version under slackware 13.1 from use ready package from higher version of slackware) I have been struggling for a while to get SickBeard installed. After reviewing the log files, I saw that I had a segfault each time the plugin tried to access git to download Sickbeard therefore my install directory was blank. If you are having similar problems (I had the git directory correct in my config file and I even removed everything manually and started from scratch). I found the fix by via Google Git clone segmentation fault and found this http://eveningsamurai.wordpress.com/2011/02/11/git-clone-segmentation-fault/ As soon as I changed the repository from git://github.com/midgetspy/Sick-Beard to git://github.com/midgetspy/Sick-Beard everything installed correctly. I did this via the Unplugged menu, advanced options, chose other repository and replaced https: with git: This in turn saves this in the config file /boot/config/plugins/sickbeard/sickbeard.cfg so you can also edit this file directly to be INSTALLURL="git://github.com/midgetspy/Sick-Beard" Hope this helps others that had the segmentation fault issue I was experiencing.
October 7, 201312 yr Author Same here. Can't seem to get it to start back up again. For all with this problem, please check your sickbeard install directory, i had this same issue and my install directory of sickbeard was empty im make git clone myself and then start sickbeard from WebUI and working I thing some problem is with git (i found this) ernel: git-remote-http[26521]: segfault at 0 ip b74cd760 sp bfbd12d0 error 4 in libc-2.11.1.so[b7454000+15c000] Im suppose segfault is related with git version in sickbeard plugin from slackware 13.37 wich use other version libc (that why better is compile new version under slackware 13.1 from use ready package from higher version of slackware) I have been struggling for a while to get SickBeard installed. After reviewing the log files, I saw that I had a segfault each time the plugin tried to access git to download Sickbeard therefore my install directory was blank. If you are having similar problems (I had the git directory correct in my config file and I even removed everything manually and started from scratch). I found the fix by via Google Git clone segmentation fault and found this http://eveningsamurai.wordpress.com/2011/02/11/git-clone-segmentation-fault/ As soon as I changed the repository from git://github.com/midgetspy/Sick-Beard to git://github.com/midgetspy/Sick-Beard everything installed correctly. I did this via the Unplugged menu, advanced options, chose other repository and replaced https: with git: This in turn saves this in the config file /boot/config/plugins/sickbeard/sickbeard.cfg so you can also edit this file directly to be INSTALLURL="git://github.com/midgetspy/Sick-Beard" Hope this helps others that had the segmentation fault issue I was experiencing. I'll change this in the plug-in to avoid this issue further.
October 9, 201312 yr Hello, I have a new unRaid server and I installed Sab, CouchPotato, and Sickbeard just fine but Transmission is giving me some issues. I'm getting the following error message: kernel: transmission-da[17104]: segfault at 87 ip 0805514a sp 406aedb8 error 4 in transmission-daemon[8048000+6d000] I'm using version 1.6 of the plugin. Any ideas?
October 9, 201312 yr Author That's a new one to me... only instances I've been able to found have been resolved for quite a while. I would suggest posting to the transmission devs for help.
October 9, 201312 yr Author Welcome back Influencer!!! Glad to see you back! Its good to be back, hopefully things stay calm this time around and I can spend more time around here.
October 9, 201312 yr I had issues with the latest versions of these plugins and unRAID 5.0, specifically the ones that use Python 2.7. I noticed when I rebooted and tried to start SickBeard, Sabnzbd, or CouchPotato, I got an error that stated I was missing files in /usr/include/python2.7. Sure enough, when I checked, that directory didn't exist. I also use Overbyrn's Dropbox plugin: http://lime-technology.com/forum/index.php?topic=23287.0 Which (at least in the master branch) uses Python 2.6. To avoid these two Python packages clobbering each other, I switched to Overbyrn's python27 branch. I noticed that he uses a different package: <FILE Name="/boot/packages/python-2.7.3-i486-2.txz" Run="upgradepkg --install-new"> <URL>-q --no-check-certificate https://dl.dropbox.com/u/572553/UnRAID/packages.generic/python-2.7.3-i486-2.txz</URL> </FILE> This version does create /usr/include/python2.7, and your plugins work if I switch the Python package reference to the above. Any idea where this issue comes from?
October 9, 201312 yr I had issues with the latest versions of these plugins and unRAID 5.0, specifically the ones that use Python 2.7. I noticed when I rebooted and tried to start SickBeard, Sabnzbd, or CouchPotato, I got an error that stated I was missing files in /usr/include/python2.7. Sure enough, when I checked, that directory didn't exist. I also use Overbyrn's Dropbox plugin: http://lime-technology.com/forum/index.php?topic=23287.0 Which (at least in the master branch) uses Python 2.6. To avoid these two Python packages clobbering each other, I switched to Overbyrn's python27 branch. I noticed that he uses a different package: <FILE Name="/boot/packages/python-2.7.3-i486-2.txz" Run="upgradepkg --install-new"> <URL>-q --no-check-certificate https://dl.dropbox.com/u/572553/UnRAID/packages.generic/python-2.7.3-i486-2.txz</URL> </FILE> This version does create /usr/include/python2.7, and your plugins work if I switch the Python package reference to the above. Any idea where this issue comes from? Ack, sorry. Figured out what did it: SimpleFeatures email notify plugin prunes directories by default: http://lime-technology.com/forum/index.php?topic=12698.msg232169#msg232169 That's what I get for using so many different plugins from different authors.
October 9, 201312 yr Author I had issues with the latest versions of these plugins and unRAID 5.0, specifically the ones that use Python 2.7. I noticed when I rebooted and tried to start SickBeard, Sabnzbd, or CouchPotato, I got an error that stated I was missing files in /usr/include/python2.7. Sure enough, when I checked, that directory didn't exist. I also use Overbyrn's Dropbox plugin: http://lime-technology.com/forum/index.php?topic=23287.0 Which (at least in the master branch) uses Python 2.6. To avoid these two Python packages clobbering each other, I switched to Overbyrn's python27 branch. I noticed that he uses a different package: <FILE Name="/boot/packages/python-2.7.3-i486-2.txz" Run="upgradepkg --install-new"> <URL>-q --no-check-certificate https://dl.dropbox.com/u/572553/UnRAID/packages.generic/python-2.7.3-i486-2.txz</URL> </FILE> This version does create /usr/include/python2.7, and your plugins work if I switch the Python package reference to the above. Any idea where this issue comes from? Ack, sorry. Figured out what did it: SimpleFeatures email notify plugin prunes directories by default: http://lime-technology.com/forum/index.php?topic=12698.msg232169#msg232169 That's what I get for using so many different plugins from different authors. Glad you have it figured out. The main difference between the two python packages is the architecture it was compiled on. i486 being older than i686, but both will work.
October 10, 201312 yr I had issues with the latest versions of these plugins and unRAID 5.0, specifically the ones that use Python 2.7. I noticed when I rebooted and tried to start SickBeard, Sabnzbd, or CouchPotato, I got an error that stated I was missing files in /usr/include/python2.7. Sure enough, when I checked, that directory didn't exist. I also use Overbyrn's Dropbox plugin: http://lime-technology.com/forum/index.php?topic=23287.0 Which (at least in the master branch) uses Python 2.6. To avoid these two Python packages clobbering each other, I switched to Overbyrn's python27 branch. I noticed that he uses a different package: <FILE Name="/boot/packages/python-2.7.3-i486-2.txz" Run="upgradepkg --install-new"> <URL>-q --no-check-certificate https://dl.dropbox.com/u/572553/UnRAID/packages.generic/python-2.7.3-i486-2.txz</URL> </FILE> This version does create /usr/include/python2.7, and your plugins work if I switch the Python package reference to the above. Any idea where this issue comes from? Ack, sorry. Figured out what did it: SimpleFeatures email notify plugin prunes directories by default: http://lime-technology.com/forum/index.php?topic=12698.msg232169#msg232169 That's what I get for using so many different plugins from different authors. I'm having this exact same problem and for the life of me can't figure it out. I "believe" python is installing but the couchpotato plugin won't actually clone the program locally. Any suggestions? I'm very new to this, like 2 days new. To be more specific, I had it working all day, then I accidentally hit the "Upgrade PLG" button and it started to delete python. After that, i've not been able to get it going again.
October 10, 201312 yr I had issues with the latest versions of these plugins and unRAID 5.0, specifically the ones that use Python 2.7. I noticed when I rebooted and tried to start SickBeard, Sabnzbd, or CouchPotato, I got an error that stated I was missing files in /usr/include/python2.7. Sure enough, when I checked, that directory didn't exist. I also use Overbyrn's Dropbox plugin: http://lime-technology.com/forum/index.php?topic=23287.0 Which (at least in the master branch) uses Python 2.6. To avoid these two Python packages clobbering each other, I switched to Overbyrn's python27 branch. I noticed that he uses a different package: <FILE Name="/boot/packages/python-2.7.3-i486-2.txz" Run="upgradepkg --install-new"> <URL>-q --no-check-certificate https://dl.dropbox.com/u/572553/UnRAID/packages.generic/python-2.7.3-i486-2.txz</URL> </FILE> This version does create /usr/include/python2.7, and your plugins work if I switch the Python package reference to the above. Any idea where this issue comes from? Ack, sorry. Figured out what did it: SimpleFeatures email notify plugin prunes directories by default: http://lime-technology.com/forum/index.php?topic=12698.msg232169#msg232169 That's what I get for using so many different plugins from different authors. I'm having this exact same problem and for the life of me can't figure it out. I "believe" python is installing but the couchpotato plugin won't actually clone the program locally. Any suggestions? I'm very new to this, like 2 days new. To be more specific, I had it working all day, then I accidentally hit the "Upgrade PLG" button and it started to delete python. After that, i've not been able to get it going again. Ok, i've resolved this. It seems in the latest update, rc.couchpotato downloads the repository files into a temp directory in "/tmp/Couchpotato" then once donwloaded tried to copy those files to the install directory. The problem is that it thinks the download directory is "/tml/CouchPotatoServer" with a capital P and Server, and this the files are never moved to the install folder, and the temp folder is never deleted. cd /tmp git clone -b $BRANCH $INSTALLURL Couchpotato cp -Rfu /tmp/Couchpotato/. $INSTALLDIR rm -Rf /tmp/Couchpotato Change the code in rc.couchpotato_v2 under the INSTALL section to the above code, and it all works.
October 10, 201312 yr Type python --version version 2.6.6 --- I see that 2.7.3 has ben downloaded in the packages folder but it doesn't look to have installed, and manually running the installs cript doesn't install it still so even tho I have the clone files corrected, i still can't start the plugin
October 10, 201312 yr Author Updated to fix the path, thanks for the heads up. I tried to test all of the pull requests to catch anything but it appears I forgot one thing...my installation is on a disk so it never had to install, so I never ran into that issue!
Archived
This topic is now archived and is closed to further replies.