Hoopster Posted February 27, 2019 Share Posted February 27, 2019 3 hours ago, Rick Sanchez said: Yes No hard drives are showing. Not even the one plugged into the motherboard? It would be a good idea to post complete diagnostics (Tools-->Diagnostics from the GUI, or type 'diagnostics' at the console). Quote Link to comment
JorgeB Posted February 27, 2019 Share Posted February 27, 2019 No disks are being detect by Linux, check the board or HBA bios, depending where the disks are connected, they most likely won't be detected there either, and until they do none will appear on Unraid. If you're using the HBA make sure you're using the right cables, you need forward breakout cables, reverse breakout look the same but won't work. Quote Link to comment
Rick Sanchez Posted April 5, 2019 Author Share Posted April 5, 2019 (edited) VM etc is all working now but when it rebooted it went to 'Automatic Repair' and Windows 10 doesn't want to start. The only difference is the increased RAM - from 8GB to 16GB. The server has 32GB now. All working! All I need to do is create a backup ISO. Edited April 9, 2019 by Rick Sanchez Quote Link to comment
Ice_Black Posted July 6, 2019 Share Posted July 6, 2019 How much power (watts) do your server consume? Quote Link to comment
Rick Sanchez Posted July 7, 2019 Author Share Posted July 7, 2019 110W with Windows 10 VM on pretty much 24/7. Quote Link to comment
icedragonslair Posted September 16, 2020 Share Posted September 16, 2020 Too bad that the planing on this case is so poor, just a few very simple changes would have made this a great case 1 Quote Link to comment
icedragonslair Posted December 1, 2020 Share Posted December 1, 2020 (edited) Just went through with my Silverstone DS380 build and modifications, let me know what you think. the temps and airflow are improved greatly after some real trial and error (could not have been done without you guys). Here are some pics (gimme a little time to add them) to answer most of the questions. Edited December 1, 2020 by icedragonslair 1 Quote Link to comment
icedragonslair Posted December 11, 2020 Share Posted December 11, 2020 (edited) Here are the Temp stats for this case, running for about two months now. Under a media scan in emby this is an average of 43 degrees on the hard drives (WD Purple 10TB) and it might reach 30 degrees for the board, maybe 38 degrees for the cpu. I am so happy this turned out this well Edited December 11, 2020 by icedragonslair 1 Quote Link to comment
Rick Sanchez Posted January 28, 2021 Author Share Posted January 28, 2021 Great work on your case! Are you happy with it? Quote Link to comment
icedragonslair Posted February 12, 2021 Share Posted February 12, 2021 (edited) On 1/28/2021 at 10:56 AM, Rick Sanchez said: Great work on your case! Are you happy with it? Yes, very much so, and greatly improved as far as cooling And thank you, Ice Edited February 12, 2021 by icedragonslair Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.