December 11, 20169 yr Can you please add a link to the linuxserver Docker template repository in the first post on this thread? Also a link to Community Applications. I couldn't work out how to add a container. I expect it seems so obvious to many but it's not and there is very little information on how to actually add your containers to unRaid. It has taken me a couple hours to finally figure it out that I need to use Community Applications, although I would rather add your Docker template repository.
December 11, 20169 yr Can you please add a link to the linuxserver Docker template repository in the first post on this thread? Also a link to Community Applications. I couldn't work out how to add a container. I expect it seems so obvious to many but it's not and there is very little information on how to actually add your containers to unRaid. It has taken me a couple hours to finally figure it out that I need to use Community Applications, although I would rather add your Docker template repository. Have you read the Docker FAQ?
December 11, 20169 yr Can you please add a link to the linuxserver Docker template repository in the first post on this thread? Also a link to Community Applications. I couldn't work out how to add a container. I expect it seems so obvious to many but it's not and there is very little information on how to actually add your containers to unRaid. It has taken me a couple hours to finally figure it out that I need to use Community Applications, although I would rather add your Docker template repository. Have you read the Docker FAQ? Links to Community Applications are all over the place. In the getting started of the Docker FAQ, Limetech's Official 6.2 Manual, my signature, the All Applications Repositories and Support Threads, along with the thread being stickied itself in the Plugins section. As to the link to the repository, I well understand lsio's reasoning behind not publishing it (and they are not alone) -> it simply makes support easier as then its not their problem getting unRaid to populate the dropdown lists. They would rather (rightfully so IMO) pass everything off to CA and let me deal with the back-end stuff. An analogy would be an app for your Android device telling you to manually install the .apk instead of going to Google Play But, either way, manually adding in repositories is still supported on the current version of unRaid, and I also maintain a stickied thread that has all of the containers within the particular repositories with the repo's link, support threads, etc. All Application Repositories and Support Threads
December 12, 20169 yr Can you please add a link to the linuxserver Docker template repository in the first post on this thread? Also a link to Community Applications. I couldn't work out how to add a container. I expect it seems so obvious to many but it's not and there is very little information on how to actually add your containers to unRaid. It has taken me a couple hours to finally figure it out that I need to use Community Applications, although I would rather add your Docker template repository. Have you read the Docker FAQ? Links to Community Applications are all over the place. In the getting started of the Docker FAQ, Limetech's Official 6.2 Manual, my signature, the All Applications Repositories and Support Threads, along with the thread being stickied itself in the Plugins section. As to the link to the repository, I well understand lsio's reasoning behind not publishing it (and they are not alone) -> it simply makes support easier as then its not their problem getting unRaid to populate the dropdown lists. They would rather (rightfully so IMO) pass everything off to CA and let me deal with the back-end stuff. An analogy would be an app for your Android device telling you to manually install the .apk instead of going to Google Play But, either way, manually adding in repositories is still supported on the current version of unRaid, and I also maintain a stickied thread that has all of the containers within the particular repositories with the repo's link, support threads, etc. All Application Repositories and Support Threads Thank you for the background, I'm a newbie so always learning how things work. I thought it was a requirement to publish repositories in order for it to work - is that something that has changed or was it always that way? I like the way you compared Community Applications to Google Play, now understand how its meant to work - I will attempt to embrace the Community Applications plugin (and the awesome work you put into this).
December 12, 20169 yr Can you please add a link to the linuxserver Docker template repository in the first post on this thread? Also a link to Community Applications. I couldn't work out how to add a container. I expect it seems so obvious to many but it's not and there is very little information on how to actually add your containers to unRaid. It has taken me a couple hours to finally figure it out that I need to use Community Applications, although I would rather add your Docker template repository. Have you read the Docker FAQ? Thank you for the link. Yes, I have had a look through these although didn't cover my main questions (or I wasn't asking the right questions). I think part of the problem is that version 6.2 has brought in some awesome improvements but these are still very new. I am new too so don't know anything about the background.
December 12, 20169 yr Can you please add a link to the linuxserver Docker template repository in the first post on this thread? Also a link to Community Applications. I couldn't work out how to add a container. I expect it seems so obvious to many but it's not and there is very little information on how to actually add your containers to unRaid. It has taken me a couple hours to finally figure it out that I need to use Community Applications, although I would rather add your Docker template repository. Have you read the Docker FAQ? Thank you for the link. Yes, I have had a look through these although didn't cover my main questions (or I wasn't asking the right questions). I think part of the problem is that version 6.2 has brought in some awesome improvements but these are still very new. I am new too so don't know anything about the background. Yes, there is a lot to learn. In case you haven't already, you might also take a look at the How to Search sticky link in my sig.
December 12, 20169 yr I thought it was a requirement to publish repositories in order for it to work - is that something that has changed or was it always that way? I like the way you compared Community Applications to Google Play, now understand how its meant to work - I will attempt to embrace the Community Applications plugin (and the awesome work you put into this). Its always been like that (except for the original proof of concept plugin a couple years ago that maybe 2 people installed) With CA, the concept of repositories is completely removed from the unRaid system, and you just let it handle all of the back-end stuff. The application list that it downloads in ~1 second everytime you go to the apps tab is updated every 2 hours 24/7
December 14, 20169 yr I'm getting the following error trying to create a docker from a template. Even after I delete the old image and template. docker: Error response from daemon: Duplicate mount point '/config' I get this from a couple templates. Any ideas?
December 14, 20169 yr I'm getting the following error trying to create a docker from a template. Even after I delete the old image and template. docker: Error response from daemon: Duplicate mount point '/config' I get this from a couple templates. Any ideas? You've added a /config mapping. There's probably already one there if you hit show advanced
December 14, 20169 yr I'm getting the following error trying to create a docker from a template. Even after I delete the old image and template. docker: Error response from daemon: Duplicate mount point '/config' I get this from a couple templates. Any ideas? You've added a /config mapping. There's probably already one there if you hit show advanced That was it thanks. Finally got all my stuff up and running again. Luckily my MariaDB instance was still intact. This has my entire KODI database. 24 Months old and still running like a champ.
December 24, 20169 yr Just added watcher as a docker request: http://feathub.com/linuxserver/linuxserver.github.io/+62 Discussion here: Hopefully people will upvote. Either way, thanks to everyone in the LinuxServer team, you're all great!
December 24, 20169 yr Just added watcher as a docker request: http://feathub.com/linuxserver/linuxserver.github.io/+62 Discussion here: Hopefully people will upvote. Either way, thanks to everyone in the LinuxServer team, you're all great! It could be one of our community apps? We make it and you support it? Sent from my LG-H815 using Tapatalk
December 24, 20169 yr Just added watcher as a docker request: http://feathub.com/linuxserver/linuxserver.github.io/+62 Discussion here: Hopefully people will upvote. Either way, thanks to everyone in the LinuxServer team, you're all great! It could be one of our community apps? We make it and you support it? Sent from my LG-H815 using Tapatalk I would be happy to help support it sure.
December 24, 20169 yr Just added watcher as a docker request: http://feathub.com/linuxserver/linuxserver.github.io/+62 Discussion here: Hopefully people will upvote. Either way, thanks to everyone in the LinuxServer team, you're all great! There is already a container made. https://hub.docker.com/r/williambroown/watcherdocker/ You can add it through CA or just fill in the appropriate fields in an empty template. Of course it will not be the high quality as the ones from linuxserver
December 31, 20169 yr Another day another request. Radarr, a fork of Sonarr for Movies. http://feathub.com/linuxserver/linuxserver.github.io/+64 https://github.com/galli-leo/Radarr https://www.reddit.com/r/usenet/comments/5krgvl/i_created_a_fork_of_sonarr_with_support_for/ Given its a fork of Sonarr it might be a little easier to setup as a docker. Cheers.
January 10, 20179 yr Another day another request. Radarr, a fork of Sonarr for Movies. http://feathub.com/linuxserver/linuxserver.github.io/+64 https://github.com/galli-leo/Radarr Given its a fork of Sonarr it might be a little easier to setup as a docker. Cheers. +1 for this. github for it with changes and updates is already quite impressive.
January 10, 20179 yr Another day another request. Radarr, a fork of Sonarr for Movies. http://feathub.com/linuxserver/linuxserver.github.io/+64 https://github.com/galli-leo/Radarr https://www.reddit.com/r/usenet/comments/5krgvl/i_created_a_fork_of_sonarr_with_support_for/ Given its a fork of Sonarr it might be a little easier to setup as a docker. Cheers. Another day another request. Radarr, a fork of Sonarr for Movies. http://feathub.com/linuxserver/linuxserver.github.io/+64 https://github.com/galli-leo/Radarr https://www.reddit.com/r/usenet/comments/5krgvl/i_created_a_fork_of_sonarr_with_support_for/ Given its a fork of Sonarr it might be a little easier to setup as a docker. Cheers. +1 for this. github for it with changes and updates is already quite impressive. Might want to take a look here & here.
January 13, 20179 yr I feel real dumb, but what URL should I put in the Template Repositories box in order to get your templates to show up? Thanks in advance for not calling me really stupid.
January 13, 20179 yr I feel real dumb, but what URL should I put in the Template Repositories box in order to get your templates to show up? Thanks in advance for not calling me really stupid. Install Community Applications (link in sig) instead. Better way of doing things. But, you can find the repository URL to handle things the old-fashioned way here: http://lime-technology.com/forum/index.php?topic=37958.0
January 21, 20179 yr any plans on a subsonic docker?? it top 5 in the requests and i believe you took care 3 out 5 of those already.
January 25, 20179 yr any plans on a subsonic docker?? it top 5 in the requests and i believe you took care 3 out 5 of those already. We have a libresonic container here: https://hub.docker.com/r/linuxserver/libresonic/
February 23, 20179 yr I installed the transmission container but the settings do not survive a reboot. The config dir is /mnt/cache/appdata What am I doing wrong?
February 23, 20179 yr 12 minutes ago, extremeaudio said: I installed the transmission container but ... What am I doing wrong? You are posting in the wrong thread. There is a thread specifically for each docker. You can get to the transmission support thread by clicking on its link in Community Applications.
April 6, 20179 yr Hi, Can you make this docker for unraid? https://github.com/Ubiquiti-App/UNMS/wiki/Installation-%26-Update
April 6, 20179 yr Hi, Can you make this docker for unraid? https://github.com/Ubiquiti-App/UNMS/wiki/Installation-%26-UpdateNo, they have their own version on the hub.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.