Wob76 Posted August 11, 2016 Share Posted August 11, 2016 Looking at my logs since my last post and it appears that jacket is still working from a search point of view, I am still seeing logs for results found. But I can't access the admin dashboard. Tried clearing your browser cache? Hi CHBMB, Yep, I also tried an alternative browser without any luck. I might just delete the container and config, then set up again. Thanks, Wob Quote Link to comment
Wob76 Posted August 11, 2016 Share Posted August 11, 2016 OK, there seems to be a problem with the Admin Password. I did a fresh install, first thing I did was set a Admin Password, then when I log back in it gives me the above mentioned errors. Remove the password from ServerConfig.json and it works again. Different password didn't make any difference. I restored my old config, removed the password and it all works. I don't expose my Jackett externally so I am just leaving it without a password set. Wob. Quote Link to comment
CHBMB Posted August 11, 2016 Share Posted August 11, 2016 OK, there seems to be a problem with the Admin Password. I did a fresh install, first thing I did was set a Admin Password, then when I log back in it gives me the above mentioned errors. Remove the password from ServerConfig.json and it works again. Different password didn't make any difference. I restored my old config, removed the password and it all works. I don't expose my Jackett externally so I am just leaving it without a password set. Wob. I can't reproduce this behaviour, just pulled this to test and set a password and it's working.... Are you changing anything else other than the password? Not changing the base path override or anything else? Quote Link to comment
sparklyballs Posted August 11, 2016 Share Posted August 11, 2016 OK, there seems to be a problem with the Admin Password. I did a fresh install, first thing I did was set a Admin Password, then when I log back in it gives me the above mentioned errors. Remove the password from ServerConfig.json and it works again. Different password didn't make any difference. I restored my old config, removed the password and it all works. I don't expose my Jackett externally so I am just leaving it without a password set. Wob. I can't reproduce this behaviour, just pulled this to test and set a password and it's working.... Are you changing anything else other than the password? Not changing the base path override or anything else? I also can set a password and log in and out etc... Quote Link to comment
Wob76 Posted August 15, 2016 Share Posted August 15, 2016 OK, not sure what was going on. I pulled down a fresh version, with all the defaults to test. Worked fine. Reloaded with my existing configs, set a password, and it is working again. It may have been something to do with the URL I was entering. I am using a base path override (although since I am not actually reverse proxying jackett I could turn that off) If I go to http://server:9117/ it redirects to http://server:9117/jackett/Admin/Dashboard and is working fine. if I go to http://server:9117/jackett/ then I get the interface but with the error, so I am guessing you need to go to the base path and let the redirect kick in. So note, don't add base path unless you are going to specify the full path. Thanks, Wob Quote Link to comment
morbidpete Posted September 15, 2016 Share Posted September 15, 2016 Hey, Any chance of a Jackett-Public build? Now Jackett has removed all public trackers it has a little less utility than before. I believe this is the main Jackett-Public repo: https://github.com/raspdealer/Jackett Thanks! This please :-P Quote Link to comment
druck21 Posted September 19, 2016 Share Posted September 19, 2016 Is it possible to add your own private trackers to this docker? I am trying to follow a tutorial that involves adding a file to the 'src/Jackett/Indexers/' folder and editing Jackett.csproj but those aren't within the config folder and I'm not seeing them when I look into the actual docker as well. Is there anyway I can achieve this? Quote Link to comment
lhw455 Posted October 9, 2016 Share Posted October 9, 2016 Hey, Any chance of a Jackett-Public build? Now Jackett has removed all public trackers it has a little less utility than before. I believe this is the main Jackett-Public repo: https://github.com/raspdealer/Jackett Thanks! This please :-P This extra pretty please :-) Quote Link to comment
grantbey Posted October 13, 2016 Share Posted October 13, 2016 I'm having issues, hopefully you guys can help. My configuration is set as below on the Jackett admin page: My container is set up as follows: If I run a manual search and select "download locally" the torrent is sent to deluge, however if I select "save to server blackhole directory" I get the error "request to jacket server failed" on the screen, but no mention in the logs. Additionally, if I run a search in sonarr I get shown releases from my indexer, but selecting them for download gives the error "invalid torrent file specified" Any help would be appreciated. Quote Link to comment
grantbey Posted October 15, 2016 Share Posted October 15, 2016 RE my above post, consider is SOLVED. The problem was quite simple: I use nginx to reverse proxy my various application interfaces to subdomains which are accessible over the internet. Because of this, Jackett was generating a torznab host address of the form https://jacket.mydomain.com/. Simply changing this to my local IP address when adding it to Sonarr (eg http://10.0.1.7:port/) solved the problem. Quote Link to comment
CHBMB Posted October 16, 2016 Share Posted October 16, 2016 I was planning to look at this over the next few days, and this is a great example of why it's imperative to post the exact details of your setup, because if an issue can't be replicated, then it can't be solved... Glad you got it fixed. Sent from my LG-H815 using Tapatalk Quote Link to comment
bobbintb Posted October 25, 2016 Share Posted October 25, 2016 Any plans for a Cardigann docker? Every time I have an issue with Jackett everyone tells me to switch to Cardigann. Quote Link to comment
tiny-e Posted November 5, 2016 Share Posted November 5, 2016 One more request for the Public version of Jackett. Please, and thank you! Quote Link to comment
bobbintb Posted November 5, 2016 Share Posted November 5, 2016 One more request for the Public version of Jackett. Please, and thank you! What's the Public version? Quote Link to comment
weirdcrap Posted November 15, 2016 Share Posted November 15, 2016 One more request for the Public version of Jackett. Please, and thank you! What's the Public version? A fork of Jackett that includes support for public trackers not just private ones. Quote Link to comment
Guest dranani Posted November 16, 2016 Share Posted November 16, 2016 Is there any way someone could point me in the direction of getting this installed? I am relatively new when it comes to linux and don't know where to start. Quote Link to comment
bobbintb Posted November 16, 2016 Share Posted November 16, 2016 Is there any way someone could point me in the direction of getting this installed? I am relatively new when it comes to linux and don't know where to start. Follow this: https://lime-technology.com/forum/index.php?topic=40262.0 It's pretty east after that. Quote Link to comment
JohnnyT Posted November 17, 2016 Share Posted November 17, 2016 Sometimes Jackett Docker will just randomly stop responding and I need to restart the docker. This is the last log line before it needs to be restarted: Error Top level exception System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.Sockets.SocketException: Address already in use I am also having this issue. I have a friend running it on windows and he does not have this issue. What code do I need to restart the docker from the command line? It seems to happen every few days and I only find out because sonarr tells me it can't contact any trackers. I don't mind using cron as a work around and restart it every 6 hours or so. Quote Link to comment
JohnnyT Posted November 17, 2016 Share Posted November 17, 2016 I figured out how to do the reboot. I made a .sh file with this in it. #!/bin/sh docker restart jackett docker restart CouchPotato docker restart Sonarr docker restart plexpy I then setup a cron job to run it at 2am every night. Quote Link to comment
CHBMB Posted November 17, 2016 Share Posted November 17, 2016 I figured out how to do the reboot. I made a .sh file with this in it. #!/bin/sh docker restart jackett docker restart CouchPotato docker restart Sonarr docker restart plexpy I then setup a cron job to run it at 2am every night. Could also use the userscripts plugin.... Quote Link to comment
JohnnyT Posted November 17, 2016 Share Posted November 17, 2016 I looked at that but can I say to it at 2am each day , daily seems to be the only choice, when does that run? Quote Link to comment
CHBMB Posted November 17, 2016 Share Posted November 17, 2016 I looked at that but can I say to it at 2am each day , daily seems to be the only choice, when does that run? Got a feeling it's midnight. but might be wrong.... Quote Link to comment
Squid Posted November 18, 2016 Share Posted November 18, 2016 I looked at that but can I say to it at 2am each day , daily seems to be the only choice, when does that run? Got a feeling it's midnight. but might be wrong.... The time is set by the dynamic schedules plugin currently Sent from my SM-T560NU using Tapatalk Quote Link to comment
softbeep Posted January 15, 2017 Share Posted January 15, 2017 Does anyone know how I could go about adding the --ProxyConnection argument to this? UK ISP's block most of the private trackers I use and have to use a http proxy. Quote Link to comment
sparklyballs Posted January 15, 2017 Share Posted January 15, 2017 Does anyone know how I could go about adding the --ProxyConnection argument to this? UK ISP's block most of the private trackers I use and have to use a http proxy. it's in the README on our github page for the docker..... https://github.com/linuxserver/docker-jackett#parameters Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.