Shamalamadindong Posted January 30, 2016 Share Posted January 30, 2016 http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC2.A0.H0.XE5-2670.TRS5&_nkw=E5-2670&_sacat=0 Only difficulty is going to be finding an affordable socket 2011 board. Link to comment
outsider Posted February 2, 2016 Share Posted February 2, 2016 http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC2.A0.H0.XE5-2670.TRS5&_nkw=E5-2670&_sacat=0 Only difficulty is going to be finding an affordable socket 2011 board. Wow! Thanks for that link! I'm currently planning a new server and was planning on using an E5-1603 to start, but at that price, I can't let it pass. I'd buy 2 if I could find a cheap consumer desktop board for under $200 (and upgrade my desktop rig as well). Link to comment
aptalca Posted February 2, 2016 Share Posted February 2, 2016 Are all 2011v3 boards backwards compatible with v1? Link to comment
mauler57 Posted February 2, 2016 Share Posted February 2, 2016 This board seems good but expensive. I think dual 2670's would be awesome http://www.newegg.com/global/au/Product/Product.aspx?Item=N82E16813131886 Link to comment
outsider Posted February 2, 2016 Share Posted February 2, 2016 Are all 2011v3 boards backwards compatible with v1? I'm not 100% sure, but I would say no to backwards comparability. Looking at the supermicro website, the X9 series motherboards are compatible with E5-1600/2600 and E5-1600/2600 v2 family, while the X10 series mobo's are compatible with E5-1600/2600 v3. The v3 family xeons support DDR4, where the V2 and earlier were DDR3. Link to comment
aptalca Posted February 2, 2016 Share Posted February 2, 2016 Are all 2011v3 boards backwards compatible with v1? I'm not 100% sure, but I would say no to backwards comparability. Looking at the supermicro website, the X9 series motherboards are compatible with E5-1600/2600 and E5-1600/2600 v2 family, while the X10 series mobo's are compatible with E5-1600/2600 v3. The v3 family xeons support DDR4, where the V2 and earlier were DDR3. On that's a shame. I was about to pull the trigger on this awesome board with 10 sata3 but it's v3 with ddr4 http://m.ebay.com/itm/161921784506 Link to comment
NotYetRated Posted February 2, 2016 Share Posted February 2, 2016 I've not been able to locate any motherboards for any reasonable price, of the original 2011 socket. All of the prices I have seen, 300$+, are similar to 2011v3 prices. This is the nicest I have found, for my needs. http://www.newegg.com/Product/Product.aspx?Item=N82E16813157523 Not sure if the lower frequency will hurt my current performance either. Double the cores should make up for it. Running e3-1245v3 now. Link to comment
outsider Posted February 2, 2016 Share Posted February 2, 2016 On that's a shame. I was about to pull the trigger on this awesome board with 10 sata3 but it's v3 with ddr4 http://m.ebay.com/itm/161921784506 There's always this board that takes up to v2 CPUs. (still 10SATA ports, 6 are SATA3 and 4 are SATA2) http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0.XX9SRL-F.TRS0&_nkw=X9SRL-F&_sacat=0 Link to comment
aptalca Posted February 2, 2016 Share Posted February 2, 2016 On that's a shame. I was about to pull the trigger on this awesome board with 10 sata3 but it's v3 with ddr4 http://m.ebay.com/itm/161921784506 There's always this board that takes up to v2 CPUs. (still 10SATA ports, 6 are SATA3 and 4 are SATA2) http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0.XX9SRL-F.TRS0&_nkw=X9SRL-F&_sacat=0 Nice find. Ipmi and 10 sata I like it Link to comment
outsider Posted February 2, 2016 Share Posted February 2, 2016 Nice find. Ipmi and 10 sata I like it It;s the mobo I'm buying for that E5-2670 cpu. Link to comment
mauler57 Posted February 3, 2016 Share Posted February 3, 2016 On that's a shame. I was about to pull the trigger on this awesome board with 10 sata3 but it's v3 with ddr4 http://m.ebay.com/itm/161921784506 There's always this board that takes up to v2 CPUs. (still 10SATA ports, 6 are SATA3 and 4 are SATA2) http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0.XX9SRL-F.TRS0&_nkw=X9SRL-F&_sacat=0 Would it be a silly move to buy the other dual cpu board i posted earlier? I did want dual cpu but not if there are better options Link to comment
net2wire Posted February 3, 2016 Share Posted February 3, 2016 Shamalamadindong Thanks for the post. Never considered cpu's from ebay until now. Hope they perform better than expected. Link to comment
DoeBoye Posted February 4, 2016 Share Posted February 4, 2016 Uh-oh! I have been avoiding an upgrade because I couldn't justify the cost, but assuming I can find a good motherboard, I may need to go down this route! . Thanks OP! Link to comment
NotYetRated Posted February 4, 2016 Share Posted February 4, 2016 Uh-oh! I have been avoiding an upgrade because I couldn't justify the cost, but assuming I can find a good motherboard, I may need to go down this route! . Thanks OP! Ya I think I am jumping on it. This proc, found one for 65 bucks. Motherboard unfortunately is looking to run 250-300, though I won't need any RAM. I was planning to wait for the new Intel E line, supposedly dropping soon, but highly doubt ill get the same overall performance/cost on that. Link to comment
DoeBoye Posted February 5, 2016 Share Posted February 5, 2016 So I did it. I resisted as long as I could, but just pulled the trigger on two of these and 64GB of Registered ECC Ram.... It's been 5 years since I last upgraded this system, so I like to think I can justify it . I've been using an x4 600e since 2011, and would really love to get into this whole vm thing, and I think this will definitely give me the platform to do it! I'll make a new post out of the Good Deals forum when all the parts come in. I appreciate the concern over Engineering Samples floating around Ebay (And Gary is right. There seems to be a bunch of them!), but these chips are legit. There's a huge thread over at servethehome discussing them. Apparently some giant server farm upgraded and dumped them on the market. The price has been slowly dropping over the last few months and a number of users have ordered them and reported back. Again, as Gary mentioned in the thread I linked to above, be careful to get ones that support vt-d (You want the SR0KX model). As far as motherboards are concerned, there is limited choice. The cheapest dual socket one I could find was for CDN$400, so you're definitely paying a premium for it. Single socket were generally 50$ or so cheaper. That said, when you factor in the cost of the chip, and the performance you get (12500 Passmark), it becomes much more of a deal. If you add a second processor, your score goes up to 18388. Trying to match those numbers with more current chips will definitely prove a lot more costly... Edit : fixed url Link to comment
BigWorm Posted February 5, 2016 Share Posted February 5, 2016 Price is crazy good! I think I am going to pick one up and pair it with a X9SRL-F-O. 32GB Ram and I am looking at around $430. Just can't beat that price! Link to comment
aptalca Posted February 6, 2016 Share Posted February 6, 2016 Bought a cpu but will hold off on getting a mobo. Not sure how long I'll last lol Link to comment
RAINMAN Posted February 6, 2016 Share Posted February 6, 2016 I've been using an x4 600e since 2011, and would really love to get into this whole vm thing, and I think this will definitely give me the platform to do it! Any chance you want to let that 600e go? Link to comment
DoeBoye Posted February 6, 2016 Share Posted February 6, 2016 Any chance you want to let that 600e go? Possibly. I considered setting up a backup server with it, but I haven't decided yet... Link to comment
Drider Posted February 6, 2016 Share Posted February 6, 2016 Its amazing to me no one's really mentioned how much a decent amount of ECC Registered memory is going to run you, not just the motherboard. Anyway I picked two up for $138.00, Gonna wait to see if I can get a deal on a 64GB Kingston kit $400.00 USD is a little pricey right now to shell out with the $329.99 ASUS Dual Socket board. (Then again its a business expense.... Damn itchy 'buy it right now today' finger...) Link to comment
DoeBoye Posted February 6, 2016 Share Posted February 6, 2016 Its amazing to me no one's really mentioned how much a decent amount of ECC Registered memory is going to run you, not just the motherboard. Anyway I picked two up for $138.00, Gonna wait to see if I can get a deal on a 64GB Kingston kit $400.00 USD is a little pricey right now to shell out with the $329.99 ASUS Dual Socket board. (Then again its a business expense.... Damn itchy 'buy it right now today' finger...) I bought 64GB for $150 shipped from here: http://m.ebay.ca/itm/201380486027?_mwBanner=1 Link to comment
BigWorm Posted February 6, 2016 Share Posted February 6, 2016 Its amazing to me no one's really mentioned how much a decent amount of ECC Registered memory is going to run you, not just the motherboard. Anyway I picked two up for $138.00, Gonna wait to see if I can get a deal on a 64GB Kingston kit $400.00 USD is a little pricey right now to shell out with the $329.99 ASUS Dual Socket board. (Then again its a business expense.... Damn itchy 'buy it right now today' finger...) RAM is cheap. $89 for 32gb in eBay. Link to comment
Drider Posted February 6, 2016 Share Posted February 6, 2016 Good point. Now I'm wondering why I was looking on Newegg... Link to comment
Drider Posted February 6, 2016 Share Posted February 6, 2016 Its amazing to me no one's really mentioned how much a decent amount of ECC Registered memory is going to run you, not just the motherboard. Anyway I picked two up for $138.00, Gonna wait to see if I can get a deal on a 64GB Kingston kit $400.00 USD is a little pricey right now to shell out with the $329.99 ASUS Dual Socket board. (Then again its a business expense.... Damn itchy 'buy it right now today' finger...) I bought 64GB for $150 shipped from here: http://m.ebay.ca/itm/201380486027?_mwBanner=1 Whoa! Good find. Annnnnd... Sold! Link to comment
peter_sm Posted February 6, 2016 Share Posted February 6, 2016 I order this one And I hope this E5-2670 SR0KX have VT-d support http://www.ebay.ca/itm/262118101167 Now I need a cooler and a MB that support DDR3, any feedback what I could buy is appreciate Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.