jbrodriguez Posted October 8, 2017 Author Share Posted October 8, 2017 v3.0.3 is out (OTA release) ! 3.0.3 - Optimize server refresh - Fix issues with docker & vm tabs selection - Fix font size of ticker widgets I think this finally fixes the issues with tab selection. I've changed a bit how the server is refreshed: when you pull down to refresh, it doesn't update dockers & vms. It should make the full server refresh a bit faster. But it still updates both tabs whenever you switch to them. And now you have a refresh button, so you can remain in the tab to update docker/vm status, no need to switch tabs to update. Also, when you update to plugin v2.4.0, there's another small optimization in terms of retrieving data from the server. Let me know how this works for you. Quote Link to comment
wgstarks Posted October 8, 2017 Share Posted October 8, 2017 (edited) 22 minutes ago, jbrodriguez said: - Fix issues with docker & vm tabs selection Updated both app and plugin. Still unable to select the docker tab without a double tap. Edit: Except when starting from the disks tab. Edited October 8, 2017 by wgstarks Quote Link to comment
Ashe Posted October 9, 2017 Share Posted October 9, 2017 Edit: Except when starting from the disks tab.Exactly the same here, the first run through of clicking tabs from left to right is very smooth, after that it’s the same behaviour Quote Link to comment
jbrodriguez Posted October 9, 2017 Author Share Posted October 9, 2017 I found the solution !! (I think ) Will post an update later. Quote Link to comment
jbrodriguez Posted October 9, 2017 Author Share Posted October 9, 2017 v3.0.4 is available as an OTA release ! 3.0.4 - Fix for tab selection issues Quote Link to comment
Ashe Posted October 10, 2017 Share Posted October 10, 2017 Confirmed as fixed, thanks!Another item I have noticed is in the VM tab if you try to destroy a VM, it responds with “unknown action ‘domain_destroy’ “ Quote Link to comment
jbrodriguez Posted October 10, 2017 Author Share Posted October 10, 2017 9 hours ago, Ashe said: destroy a VM, it responds with “unknown action ‘domain_destroy’ Thanks for the report Ashe ! Quote Link to comment
jbrodriguez Posted October 10, 2017 Author Share Posted October 10, 2017 v3.0.5 is available as an OTA release ! 3.0.5 - Fix font size of additional marquee widgets - Fix vm command names (destroy, undefine) Quote Link to comment
jbrodriguez Posted October 10, 2017 Author Share Posted October 10, 2017 If anyone has a UPS connected to their server, could you send me the output of /sbin/apcaccess (pm if you prefer) I'm looking into incorporating UPS status into the app. Quote Link to comment
BillClinton Posted October 10, 2017 Share Posted October 10, 2017 I know your just looking at incorporating UPS status, which is a great option! Something I would really appreciate. Would you look at incorporating NUT UPS status too. Sent from my iPad using Tapatalk Quote Link to comment
Ashe Posted October 10, 2017 Share Posted October 10, 2017 If anyone has a UPS connected to their server, could you send me the output of /sbin/apcaccess (pm if you prefer) I'm looking into incorporating UPS status into the app.root@MediaOne:~# /sbin/apcaccessAPC : 001,048,1105DATE : 2017-10-10 15:20:45 +0400HOSTNAME : MediaOneVERSION : 3.14.14 (31 May 2016) slackwareUPSNAME : UPS_IDENCABLE : Custom Cable SmartDRIVER : APC Smart UPS (any)UPSMODE : Stand AloneSTARTTIME: 2017-10-07 09:37:15 +0400MODEL : Smart-UPS SC1500STATUS : ONLINELINEV : 228.0 VoltsLOADPCT : 9.1 PercentBCHARGE : 100.0 PercentTIMELEFT : 85.0 MinutesMBATTCHG : 10 PercentMINTIMEL : 10 MinutesMAXTIME : 0 SecondsMAXLINEV : 228.0 VoltsMINLINEV : 226.0 VoltsOUTPUTV : 228.0 VoltsSENSE : HighDWAKE : 0 SecondsDSHUTD : 60 SecondsDLOWBATT : 2 MinutesLOTRANS : 208.0 VoltsHITRANS : 253.0 VoltsRETPCT : 0.0 PercentALARMDEL : 5 SecondsBATTV : 26.8 VoltsLINEFREQ : 50.0 HzLASTXFER : Line voltage notch or spikeNUMXFERS : 0TONBATT : 0 SecondsCUMONBATT: 0 SecondsXOFFBATT : N/ASELFTEST : NOSTESTI : 336STATFLAG : 0x05000008REG1 : 0x00REG2 : 0x00REG3 : 0x00MANDATE : 04/16/12SERIALNO : 5S1216T00762BATTDATE : 04/16/12NOMOUTV : 230 VoltsNOMBATTV : 24.0 VoltsFIRMWARE : 738.3.IEND APC : 2017-10-10 15:20:51 +0400 1 Quote Link to comment
jbrodriguez Posted October 10, 2017 Author Share Posted October 10, 2017 2 hours ago, BillClinton said: Would you look at incorporating NUT UPS status too. I'll look into it. Could you send me the output of /usr/bin/upsc ups 127.0.0.1 (adjust the name and/or ip if needed) Quote Link to comment
BillClinton Posted October 10, 2017 Share Posted October 10, 2017 (edited) 19 hours ago, jbrodriguez said: I'll look into it. Could you send me the output of /usr/bin/upsc ups 127.0.0.1 (adjust the name and/or ip if needed) Here's the output root@Tower:~# /usr/bin/upsc ups 127.0.0.1 Error: Variable not supported by UPS Also tried localhost with no luck. Sorry, this doesn't seem very helpful. once again thanks heaps for this. Edited October 11, 2017 by BillClinton fixed a text color issue. Quote Link to comment
jbrodriguez Posted October 11, 2017 Author Share Posted October 11, 2017 17 hours ago, BillClinton said: Sorry, this doesn't seem very helpful. Actually, this one's on me. It was the wrong command syntax. Please try with /usr/bin/upsc [email protected] 1 Quote Link to comment
BillClinton Posted October 11, 2017 Share Posted October 11, 2017 6 hours ago, jbrodriguez said: Actually, this one's on me. It was the wrong command syntax. Please try with /usr/bin/upsc [email protected] I see it now root@Tower:~# /usr/bin/upsc [email protected] battery.charge: 100 battery.charge.low: 30 battery.runtime: 1000 battery.type: PbAc device.mfr: MGE UPS SYSTEMS device.model: Nova 1100 AVR device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.synchronous: no driver.version: 2.7.4.1 driver.version.data: MGE HID 1.42 driver.version.internal: 0.42 outlet.1.status: on output.voltage: 230.0 ups.delay.shutdown: 20 ups.delay.start: 30 ups.load: 6 ups.mfr: MGE UPS SYSTEMS ups.model: Nova 1100 AVR ups.power.nominal: 1100 ups.productid: ffff ups.status: OL ups.timer.shutdown: -1 ups.timer.start: -10 ups.vendorid: 0463 thanks for letting me help 1 Quote Link to comment
mata7 Posted October 24, 2017 Share Posted October 24, 2017 (edited) @jbrodriguez man i got to say i ben using you app for like 2 month and i love it, i really want to thank you for you great work, so thank you Edited October 24, 2017 by mata7 Quote Link to comment
jbrodriguez Posted October 24, 2017 Author Share Posted October 24, 2017 8 hours ago, mata7 said: @jbrodriguez man i got to say i ben using you app for like 2 month and i love it, i really want to thank you for you great work, so thank you Thanks a lot mata7 ! I appreciate the comment ! Quote Link to comment
jbrodriguez Posted October 25, 2017 Author Share Posted October 25, 2017 v3.1.0 is available on App Store / Play Store ! 3.1.0 This release implement UPS status support ! The latest plugin version (2.5.0) needs to be installed on the server. Additionally, hardware back button handling has been restored (Android only) This should support both APC and NUT. It first looks for nut, then defaults to apc, if present at all. 1 Quote Link to comment
wgstarks Posted October 25, 2017 Share Posted October 25, 2017 Looks to be working properly on my iPhone with my APC. I’m wondering if it would be possible to add a setting to disable this or perhaps add a separate screen for UPS. I find the scrolling to be a little distracting. No idea how hard this would be to implement and it’s really only a cosmetic issue. Not a high priority if you decide to do it. Quote Link to comment
Ashe Posted October 25, 2017 Share Posted October 25, 2017 Working great with APC on iPhone, great work! Quote Link to comment
jbrodriguez Posted October 25, 2017 Author Share Posted October 25, 2017 Thanks for the feedback @wgstarks and @Ashe ! As for a separate screen, I'm leaning towards not implementing it for now. But I could look into into a setting to slow down (speed up) the scrolling rate. Would that help ? Quote Link to comment
wgstarks Posted October 25, 2017 Share Posted October 25, 2017 5 minutes ago, jbrodriguez said: But I could look into into a setting to slow down (speed up) the scrolling rate. Would that help ? If you're going to implement special settings for the UPS feature, I think my preference would be an on/off switch or maybe show/hide. The scroll speed might be a nice touch too though. Quote Link to comment
BillClinton Posted October 26, 2017 Share Posted October 26, 2017 I can't get my Controlr companion plugin to start. It is stuck on the 'stopped' setting. I have toggled the enable controlr between yes and no with 0 effect. I have changed the port number with 0 effect. (no conflicting ports with any dockers) I have removed the plugin and reinstalled with 0 effect. I have deleted the .cfg file with 0 effect. I have removed the default Cirt Directory info with 0 effect. it also wasn't working before the upgrade, but wasn't too worried about it before, but with NUT integration I was hopping to get it working. here is the tail of the Server Logs Oct 26 07:13:34 Tower root: plugin: creating: /boot/config/plugins/controlr/controlr-2.5.0.tgz - downloading from URL https://github.com/jbrodriguez/controlr/releases/download/2.5.0/controlr-2.5.0.tgz Oct 26 07:13:49 Tower root: plugin: checking: /boot/config/plugins/controlr/controlr-2.5.0.tgz - MD5 Oct 26 07:13:49 Tower root: plugin: skipping: /boot/config/plugins/controlr/controlr.cfg already exists Oct 26 07:13:49 Tower root: plugin: running: anonymous Oct 26 07:13:50 Tower root: plugin: creating: /tmp/controlr-chkconf - from INLINE content Oct 26 07:13:50 Tower sudo: root : TTY=unknown ; PWD=/usr/local/emhttp ; USER=root ; COMMAND=/bin/bash -c /usr/local/emhttp/plugins/controlr/controlr -port 2378 -certdir '/boot/config/ssl/certs' Oct 26 07:13:50 Tower root: plugin: running: /tmp/controlr-chkconf Oct 26 07:14:20 Tower php: /usr/local/emhttp/plugins/controlr/scripts/stop Oct 26 07:14:24 Tower php: /usr/local/emhttp/plugins/controlr/scripts/start Oct 26 07:14:24 Tower sudo: root : TTY=unknown ; PWD=/usr/local/emhttp ; USER=root ; COMMAND=/bin/bash -c /usr/local/emhttp/plugins/controlr/controlr -port 2378 -certdir '/boot/config/ssl/certs' Oct 26 07:16:14 Tower php: /usr/local/emhttp/plugins/advanced.buttons/script/plugin 'remove' 'controlr.plg' &>/dev/null & Oct 26 07:16:14 Tower root: plugin: running: anonymous Oct 26 07:17:50 Tower emhttp: cmd: /usr/local/emhttp/plugins/dynamix.plugin.manager/scripts/plugin install https://raw.githubusercontent.com/jbrodriguez/unraid/master/plugins/controlr.plg Oct 26 07:17:51 Tower root: plugin: creating: /boot/config/plugins/controlr/controlr-2.5.0.tgz - downloading from URL https://github.com/jbrodriguez/controlr/releases/download/2.5.0/controlr-2.5.0.tgz Oct 26 07:18:05 Tower root: plugin: checking: /boot/config/plugins/controlr/controlr-2.5.0.tgz - MD5 Oct 26 07:18:05 Tower root: plugin: creating: /boot/config/plugins/controlr/controlr.cfg - from INLINE content Oct 26 07:18:05 Tower root: plugin: running: anonymous Oct 26 07:18:05 Tower root: plugin: creating: /tmp/controlr-chkconf - from INLINE content Oct 26 07:18:05 Tower root: plugin: running: /tmp/controlr-chkconf Oct 26 07:18:20 Tower php: /usr/local/emhttp/plugins/controlr/scripts/start Oct 26 07:18:20 Tower sudo: root : TTY=unknown ; PWD=/usr/local/emhttp ; USER=root ; COMMAND=/bin/bash -c /usr/local/emhttp/plugins/controlr/controlr -port 2378 -certdir '/boot/config/ssl/certs' Oct 26 07:18:29 Tower emhttp: cmd: /usr/local/emhttp/plugins/dynamix/scripts/tail_log syslog Oct 26 08:17:46 Tower kernel: mdcmd (1192): spindown 6 Oct 26 08:27:09 Tower kernel: mdcmd (1193): spindown 5 Oct 26 09:19:41 Tower php: /usr/local/emhttp/plugins/controlr/scripts/stop Oct 26 09:19:50 Tower php: /usr/local/emhttp/plugins/controlr/scripts/start Oct 26 09:19:50 Tower sudo: root : TTY=unknown ; PWD=/usr/local/emhttp ; USER=root ; COMMAND=/bin/bash -c /usr/local/emhttp/plugins/controlr/controlr -port 2378 -certdir '' Oct 26 09:19:56 Tower emhttp: cmd: /usr/local/emhttp/plugins/dynamix/scripts/tail_log syslog Oct 26 09:20:46 Tower php: /usr/local/emhttp/plugins/controlr/scripts/stop Oct 26 09:20:52 Tower php: /usr/local/emhttp/plugins/controlr/scripts/stop Oct 26 09:20:56 Tower php: /usr/local/emhttp/plugins/controlr/scripts/start Oct 26 09:20:56 Tower sudo: root : TTY=unknown ; PWD=/usr/local/emhttp ; USER=root ; COMMAND=/bin/bash -c /usr/local/emhttp/plugins/controlr/controlr -port 2379 -certdir '' Oct 26 09:21:05 Tower emhttp: cmd: /usr/local/emhttp/plugins/dynamix/scripts/tail_log syslog Oct 26 09:21:35 Tower php: /usr/local/emhttp/plugins/controlr/scripts/stop Oct 26 09:21:37 Tower php: /usr/local/emhttp/plugins/controlr/scripts/stop Oct 26 09:22:37 Tower php: /usr/local/emhttp/plugins/controlr/scripts/start Oct 26 09:22:37 Tower sudo: root : TTY=unknown ; PWD=/usr/local/emhttp ; USER=root ; COMMAND=/bin/bash -c /usr/local/emhttp/plugins/controlr/controlr -port -certdir '' Oct 26 09:23:58 Tower php: /usr/local/emhttp/plugins/controlr/scripts/stop Oct 26 09:24:26 Tower php: /usr/local/emhttp/plugins/controlr/scripts/start Oct 26 09:24:26 Tower sudo: root : TTY=unknown ; PWD=/usr/local/emhttp ; USER=root ; COMMAND=/bin/bash -c /usr/local/emhttp/plugins/controlr/controlr -port 2378 -certdir '/boot/config/ssl/certs' Oct 26 09:31:56 Tower php: /usr/local/emhttp/plugins/controlr/scripts/stop Oct 26 09:32:14 Tower php: /usr/local/emhttp/plugins/controlr/scripts/start Oct 26 09:32:14 Tower sudo: root : TTY=unknown ; PWD=/usr/local/emhttp ; USER=root ; COMMAND=/bin/bash -c /usr/local/emhttp/plugins/controlr/controlr -port 2378 -certdir '/boot/config/ssl/certs' Oct 26 09:42:43 Tower emhttp: cmd: /usr/local/emhttp/plugins/dynamix/scripts/tail_log syslog controlr.log Quote Link to comment
jbrodriguez Posted October 26, 2017 Author Share Posted October 26, 2017 @BillClinton, I've replied on the plugin thread, please let's move the discussion there Quote Link to comment
BillClinton Posted October 26, 2017 Share Posted October 26, 2017 Will do the support thread button for the ControlR plugin in CA brought me here. Sent from my iPad using Tapatalk Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.