5 hours ago, binhex said:

nope there is nothing unique about the template or the image, i have no idea why that is happening.

Thanks for the response. I'll uninstall it and reinstall and see if maybe that clears something up.

On 9/18/2025 at 3:26 AM, binhex said:

I cannot replicate your scenario so i cannot test (single NAS), what i can say is that i have shifted fairly large amounts of data around using krusader without any unresponsiveness (200 GB+), however this is all locally (cache to array), i am not copying to an external device, so this is probably where the issue lies, perhaps try in smaller batches and see if the issue persists.

The fact hat unraid won't shutdown might indicate that the krusader file transfer is still in progress, so maybe check the destination and see if you can detect any file writes happening, if so then leave krusader for a period of time and see if it finishes and becomes responsive again.

One other thing you can look into is perhaps copying to a NFS share as opposed to SMB.

Hello

i am having the same problem and it is to an sftp and it is hanging on small files sometimes less than a gig. i will hit cancel and then delete the .part file restart the transfer and it will work 90% of the time. on occasion i have to do it a second time. but i can never move and entire directory of files at one go i have to transfer them individually. i have been just dealing with it since around August or September of last year but i am looking to find a resolution. if it helps it did not start doing this until after there was an update to krusader

On 9/18/2025 at 3:26 AM, binhex said:

I cannot replicate your scenario so i cannot test (single NAS), what i can say is that i have shifted fairly large amounts of data around using krusader without any unresponsiveness (200 GB+), however this is all locally (cache to array), i am not copying to an external device, so this is probably where the issue lies, perhaps try in smaller batches and see if the issue persists.

The fact hat unraid won't shutdown might indicate that the krusader file transfer is still in progress, so maybe check the destination and see if you can detect any file writes happening, if so then leave krusader for a period of time and see if it finishes and becomes responsive again.

One other thing you can look into is perhaps copying to a NFS share as opposed to SMB.

Hello

i am having the same problem and it is to an sftp and it is hanging on small files sometimes less than a gig. i will hit cancel and then delete the .part file restart the transfer and it will work 90% of the time. on occasion i have to do it a second time. but i can never move and entire directory of files at one go i have to transfer them individually. i have been just dealing with it since around August or September of last year but i am looking to find a resolution. if it helps it did not start doing this until after there was an update to krusader

Does anyone get these?

Krusader seems to work just fine, but I wonder what this is about.

Greetings all...

On 7.3.0 and the latest version of Krusader - any ideas?:

3 hours ago, Glonch said:

Greetings all...

On 7.3.0 and the latest version of Krusader - any ideas?:

haven't updated yet, haven't had a chance to read/locate the changelog -- may hold off on updates.. hope you get that resolved!

3 hours ago, Glonch said:

Greetings all...

On 7.3.0 and the latest version of Krusader - any ideas?:

SOLVED!

Had to clear cache for that site..

Go to the site -> F12 (Dev Mode) -> Right Click Reload (top left) -> select Hard Refresh

Edited May 29May 29 by Glonch

Well I never thought I'd be posting about binhex-krusader but since there was an update (that did who knows what), now I noticed two issues.

1) The icon for Krusader has turned into a bright red Krusader icon. This includes the one on the upper-left of the window and in the task bar at the bottom.

2) In my toolbar, I have a few shortcuts. One is to my torrents folder and I use the round, blue "qb" icon for this. Well with the update, that icon no longer exists.

I just went ahead and pulled from binhex/arch-krusader:2.9.0-1-02 for now.

Oh sorry to double post but I wanted to say one more thing I noticed after the update: Krusader was showing up in my GPU Statistics widget on my dashboard as one of the apps that was using the GPU. This is even though I don't have /dev/dri assigned to binhex-krusader.

Yes I've also noticed xvnc is running with the ipgu active, can that be configured or disabled?