zmanfarlee Posted August 21, 2018 Share Posted August 21, 2018 I'm having endless issues here and am really really trying very hard with google and forum searches but it seems it can be too many issues. I actually reinstalled unraid and set up the array again (kept the data). I can not for the life of me find my "home network" folder or anything from tower in file explorer. I have windows 10 education. ODDLY enough my laptop which was able to find it and pin it earlier it can find the damn folder... I just type \\tower. The desktop nothing.... it says "windows cannot access \\tower." "Chekc the spelling of the name. Otherwise...." Can anyone help me I am really struggling and can't figure out what the hell is going on with my network. Quote Link to comment
Hoopster Posted August 21, 2018 Share Posted August 21, 2018 35 minutes ago, zmanfarlee said: I'm having endless issues here and am really really trying very hard with google and forum searches but it seems it can be too many issues. I actually reinstalled unraid and set up the array again (kept the data). I can not for the life of me find my "home network" folder or anything from tower in file explorer. I have windows 10 education. ODDLY enough my laptop which was able to find it and pin it earlier it can find the damn folder... I just type \\tower. The desktop nothing.... it says "windows cannot access \\tower." "Chekc the spelling of the name. Otherwise...." Can anyone help me I am really struggling and can't figure out what the hell is going on with my network. Windows 10 networking has lots of issues. There are many reports very similar to yours in these forums. Even with these issues, you should always be able to access your server in Windows Explorer by IP address. Try that just to make sure it works as expected. Below is a thread on some potential solutions for finding your tower by name. Page 2 will probably be most relevant to your situation. Lately, there have been lots of SMB, homegroup and other networking related changes in Windows 10 that are playing havoc with the ability to see unRAID shares from a Windows 10 machine. In my case, enabling SMB 1.0/CiFS server was all it took. Others have added their unRAID server to the hosts file in Windows and there are other solutions mentioned. Quote Link to comment
zmanfarlee Posted August 21, 2018 Author Share Posted August 21, 2018 (edited) 6 hours ago, Hoopster said: Windows 10 networking has lots of issues. There are many reports very similar to yours in these forums. Even with these issues, you should always be able to access your server in Windows Explorer by IP address. Try that just to make sure it works as expected. Below is a thread on some potential solutions for finding your tower by name. Page 2 will probably be most relevant to your situation. Lately, there have been lots of SMB, homegroup and other networking related changes in Windows 10 that are playing havoc with the ability to see unRAID shares from a Windows 10 machine. In my case, enabling SMB 1.0/CiFS server was all it took. Others have added their unRAID server to the hosts file in Windows and there are other solutions mentioned. Thank you for coming on here and helping. To clarify when you say windows explorer you mean file explorer? Or did you mean being able to go to the Tower menu? which I can do just fine via ip or //tower. Did you mean the files or the menu? I will also read through the post you mentioned which I looked through before but I didn't think I had a login failure. Edited August 21, 2018 by zmanfarlee Quote Link to comment
trurl Posted August 21, 2018 Share Posted August 21, 2018 2 hours ago, zmanfarlee said: To clarify when you say windows explorer you mean file explorer? Yes, the file explorer. Instead of \\tower like worked on your laptop, you would use \\ip-address Quote Link to comment
Hoopster Posted August 21, 2018 Share Posted August 21, 2018 (edited) 3 hours ago, zmanfarlee said: Thank you for coming on here and helping. To clarify when you say windows explorer you mean file explorer? Or did you mean being able to go to the Tower menu? which I can do just fine via ip or //tower. Did you mean the files or the menu? I will also read through the post you mentioned which I looked through before but I didn't think I had a login failure. Yes, File Explorer in Windows. I directed you to page two of that thread because it talks more about Windows networking issues and not just login/authentication issues. I don't don't think login issues are your problem. And here is another thread you may find useful: Edited August 21, 2018 by Hoopster Quote Link to comment
zmanfarlee Posted August 21, 2018 Author Share Posted August 21, 2018 3 hours ago, trurl said: Yes, the file explorer. Instead of \\tower like worked on your laptop, you would use \\ip-address Thank you. Had no dice on that but will try once more when i get home. Quote Link to comment
zmanfarlee Posted August 21, 2018 Author Share Posted August 21, 2018 2 hours ago, Hoopster said: Yes, File Explorer in Windows. I directed you to page two of that thread because it talks more about Windows networking issues and not just login/authentication issues. I don't don't think login issues are your problem. And here is another thread you may find useful: Thanks I should have some time to try tonight. I know it will be worth it in the end it's just a big learning curve but at least it's valuable info. Quote Link to comment
zmanfarlee Posted August 21, 2018 Author Share Posted August 21, 2018 And just an extra thanks again to all commenting here. It's because of communities like this that I try and learn things I know little about. 1 Quote Link to comment
zmanfarlee Posted August 24, 2018 Author Share Posted August 24, 2018 On 8/21/2018 at 10:28 AM, Hoopster said: Yes, File Explorer in Windows. I directed you to page two of that thread because it talks more about Windows networking issues and not just login/authentication issues. I don't don't think login issues are your problem. And here is another thread you may find useful: Ok I tried some things but I have not solved the problem yet, BUT.... I think I am close. On my laptop I can now enter the ip address or type \\tower and pull up the files in the file explorer but I can't on my desktop. I used to not be able to do this even on my laptop (I used a saved pinned access) but now I can. I think the issue is I am using this: https://www.amazon.com/gp/product/B000N99BBC/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1 Between my unraid server and desktop and I am thinking the desktop is having an issue because of this..... Am I crazy? Am I right? Any ideas after hearing that? ANY HELP is always greatly appreciated. Quote Link to comment
zmanfarlee Posted August 24, 2018 Author Share Posted August 24, 2018 Also of note my laptop is on wireless. Also if I run ifconfig eth0 there is no ip address but there is if I run ifconfig br0 and that is the ip address that my laptop uses to access the server via file explorer? I have to be close to a solution right? Quote Link to comment
trurl Posted August 24, 2018 Share Posted August 24, 2018 An unmanaged switch shouldn't cause any problems. I have 2 of them in my LAN. Do you have Dynamix Local Master plugin installed on unRAID? Quote Link to comment
zmanfarlee Posted August 24, 2018 Author Share Posted August 24, 2018 1 hour ago, trurl said: An unmanaged switch shouldn't cause any problems. I have 2 of them in my LAN. Do you have Dynamix Local Master plugin installed on unRAID? Yeah I see Yoda :). Isn't the Eth0 not having an ip an issue? I thought I was on to soemthing cause I can type in the ip on my laptop but not my desktop... Quote Link to comment
trurl Posted August 24, 2018 Share Posted August 24, 2018 Check back at that other thread mentioned above. A solution was found for their problem. Quote Link to comment
Frank1940 Posted August 24, 2018 Share Posted August 24, 2018 Try this: https://lime-technology.com/forums/topic/73570-unable-to-find-server-on-network/?page=2&tab=comments#comment-677859 Make sure that you also check the SMB 1.0/CIFS Server box checked. Win10 is a mess to troubleshoot when it has SMB problems because there are so many Varieties and Versions of it out there and all of them have their own little quirks... Quote Link to comment
zmanfarlee Posted August 25, 2018 Author Share Posted August 25, 2018 18 hours ago, Frank1940 said: Try this: https://lime-technology.com/forums/topic/73570-unable-to-find-server-on-network/?page=2&tab=comments#comment-677859 Make sure that you also check the SMB 1.0/CIFS Server box checked. Win10 is a mess to troubleshoot when it has SMB problems because there are so many Varieties and Versions of it out there and all of them have their own little quirks... Did this. Shoot. Ill try to troubleshoot this weekend Quote Link to comment
zmanfarlee Posted August 25, 2018 Author Share Posted August 25, 2018 20 hours ago, trurl said: Check back at that other thread mentioned above. A solution was found for their problem. 18 hours ago, Frank1940 said: Try this: https://lime-technology.com/forums/topic/73570-unable-to-find-server-on-network/?page=2&tab=comments#comment-677859 Make sure that you also check the SMB 1.0/CIFS Server box checked. Win10 is a mess to troubleshoot when it has SMB problems because there are so many Varieties and Versions of it out there and all of them have their own little quirks... On 8/21/2018 at 10:28 AM, Hoopster said: Yes, File Explorer in Windows. I directed you to page two of that thread because it talks more about Windows networking issues and not just login/authentication issues. I don't don't think login issues are your problem. And here is another thread you may find useful: This is what finally fixed it! https://support.microsoft.com/en-us/help/4046019 Now I can access it. Thank you all so much. It looks like it may leave me less protected but it is the only option it seems. If you think what I did was wrong and unsafe please let me know. Thanks again! Quote Link to comment
JonathanM Posted August 25, 2018 Share Posted August 25, 2018 6 hours ago, zmanfarlee said: If you think what I did was wrong and unsafe please let me know. <smart alec mode> What, using windows? Yes, using Microsoft Windows is definitely wrong and unsafe. </smart alec mode> If it's the only option you have, then you do you what you have to do to make it work. Quote Link to comment
zmanfarlee Posted September 11, 2018 Author Share Posted September 11, 2018 On 8/25/2018 at 3:00 PM, jonathanm said: <smart alec mode> What, using windows? Yes, using Microsoft Windows is definitely wrong and unsafe. </smart alec mode> If it's the only option you have, then you do you what you have to do to make it work. LOL... I'll take the wins where I can. I have been on a streak with Sabnzbd and Sonarr so I am starting to get excited as I am getting closer to where I want to be. Quote Link to comment
Arbadacarba Posted August 20, 2019 Share Posted August 20, 2019 Just a quick note that there is anther solution to this problem without enabling SMB1. Microsoft has replaced SMB with "Function Discovery" (in a manner of speaking) and there is a daemon / script that enables that for Linux. I have "Instructions" in the thread here: forums.unraid.net/topic/82765-solved-windows-network-working-with-no-smb1/ Kevin Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.