Corsair RMi, HXi, AXi PSU Statistics - CyanLabs's fork

[Reptar]

On 8/29/2023 at 9:24 AM, giganode said:

Thank you very much. I am currently working but I will send you a pn later today with a test version of the corresponding executable needed for hxi series psus.

I also have a HX1500i and I also volunteer as tribute

 

Think you can also throw the test version my way as well? Thanks!

Edited October 11, 2023 by Reptar

[dynaminuity]

Any chance of supporting the AX1600i please? 

[giganode]

I also have a HX1500i and I also volunteer as tribute
 
Think you can also throw the test version my way as well? Thanks!

I will send you a pn later today.

[giganode]

Any chance of supporting the AX1600i please? 

Actually not. AX1600i uses a different way of communication.

[dynaminuity]

On 10/16/2023 at 5:26 AM, giganode said:

Actually not. AX1600i uses a different way of communication.

Is an implementation for this different way of communication not possible? 

[jortan]

It does look like some progress in decoding AX1600i output has been made recently:

 

https://github.com/Jon0/ax1600i

[giganode]

It does look like some progress in decoding AX1600i output has been made recently:
 
https://github.com/Jon0/ax1600i

Oh excellent!

I own an ax1600i.. I will do some testing then and see if I can get any data from the psu.

[Wassabi]

Good morning giganode

UNRAID 6.12.4 and CORSAIR HX750i
USB cable correctly connected

The DASHBOARD remains fixed and the values are not up to date

 

Edited February 10 by Wassabi
Update pics

[giganode]

Good morning giganode
UNRAID 6.12.4 and CORSAIR HX750i
USB cable correctly connected
The DASHBOARD remains fixed and the values are not up to date
https://images2.imgbox.com/f1/a5/qH5pkaWz_o.jpg
https://images2.imgbox.com/ca/2b/sGkWo5Cp_o.jpg
https://images2.imgbox.com/0a/bd/NaDZX9m0_o.jpg

Hey [emoji112]

I cannot open the images.


Gesendet von iPhone mit Tapatalk

[Wassabi]

9 minutes ago, giganode said:

Hey

I cannot open the images.


Gesendet von iPhone mit Tapatalk

Updated image

[giganode]

Updated image [emoji4]

So the widget just shows new values if you reload the dashboard?

And you can’t reposition it on the dashboard?


Gesendet von iPhone mit Tapatalk

[Wassabi]

10 minutes ago, giganode said:

So the widget just shows new values if you reload the dashboard?

And you can’t reposition it on the dashboard?


Gesendet von iPhone mit Tapatalk

If I recharge the dashboard, the values stay stuck at 38W

 

Currently I consume 110w with my UNRAID but this is not displayed correctly on the dashboard.

I can move POWER SUPPLY to several places on my UNRAID screen but the values remain stuck

Same if I reboot my unraid server, it remains wrongly stuck at 38W all the time

[giganode]

1 hour ago, Wassabi said:

If I recharge the dashboard, the values stay stuck at 38W

 

Currently I consume 110w with my UNRAID but this is not displayed correctly on the dashboard.

I can move POWER SUPPLY to several places on my UNRAID screen but the values remain stuck

Same if I reboot my unraid server, it remains wrongly stuck at 38W all the time

 

Was it working before? Are you using the plugin for the first time?

 

Please attach Diagnostics to next post.

[Wassabi]

30 minutes ago, giganode said:

 

Was it working before? Are you using the plugin for the first time?

 

Please attach Diagnostics to next post.

Yes it worked before I've been using it for about a year It's since the Unraid update to 6.12 that it no longer works.

I apologize in advance if I don't write English correctly but I use an online translator

serveur-diagnostics-20240210-1838.zip

[giganode]

28 minutes ago, Wassabi said:

Yes it worked before I've been using it for about a year It's since the Unraid update to 6.12 that it no longer works.

I apologize in advance if I don't write English correctly but I use an online translator

serveur-diagnostics-20240210-1838.zip 146.6 kB · 0 downloads

 

Thank you, couldn't find anything specific.

 

Can you try 6.12.6?

 

I have to say that I didn't have any issues with the plugin since 6.12..

[Wassabi]

1 hour ago, giganode said:

 

Thank you, couldn't find anything specific.

 

Can you try 6.12.6?

 

I have to say that I didn't have any issues with the plugin since 6.12..

ok I will update to 6.12.6 as soon as possible

[Wassabi]

16 hours ago, giganode said:

 

Thank you, couldn't find anything specific.

 

Can you try 6.12.6?

 

I have to say that I didn't have any issues with the plugin since 6.12..

Good morning,

I updated the Unraid version to 6.12.6 as requested.

The Power Supply values remain blocked.

I tried changing the values from /dev/ttyUSB0 to /dev/ttyUSB9 to test but the values are not updating.

serveur-diagnostics-20240211-1121.zip

[giganode]

Okay.

Remove the entry for serial device. It is not needed for HXi series.

I will take a look again soon.


Gesendet von iPhone mit Tapatalk

[ThirDegree]

On 10/17/2023 at 3:43 AM, giganode said:

Oh excellent!

I own an ax1600i.. I will do some testing then and see if I can get any data from the psu.

Howdy, were you ever able to do any testing with your ax1600i? Have one myself so needless to say I am interested. 

[giganode]

Howdy, were you ever able to do any testing with your ax1600i? Have one myself so needless to say I am interested. 

No, not yet. I will recheck in the next few days.

[ThirDegree]

On 4/17/2024 at 11:51 PM, giganode said:

No, not yet. I will recheck in the next few days.

Sorry to be “that guy”, just curious if you still have interest in trying to incorporate ax1600i support in this plugin. I realize time to incorporate and interest to incorporate are different. Just curious, and thank you in advance if you reply. 

[giganode]

On 7/27/2024 at 1:50 AM, ThirDegree said:

Sorry to be “that guy”, just curious if you still have interest in trying to incorporate ax1600i support in this plugin. I realize time to incorporate and interest to incorporate are different. Just curious, and thank you in advance if you reply. 

Yes I would still like to add support for 1600i.. Ihad a few things to do with higher priority.

I do have a test system here.. let me check and I will come back to you

[chrissl]

Hi, does anyone know if the HX1500i is currently supported? I tried the plugin but it shows nothing. Can anyone help please? 

Edited August 15 by chrissl
wrong power supply name

[giganode]

44 minutes ago, chrissl said:

Hi, does anyone know if the HX1500i is currently supported? I tried the plugin but it shows nothing. Can anyone help please? 

 

Hey!

I added support for HX1500i on 13th November 2023. You should be good to go. @Reptar reported, that his psu works.

 

Did you apply settings via the settings page? If not, please do and try again.

 

For manual testing open a terminal and type in

corsairmi

 

If you receive an output with actual data everything is fine.

[chrissl]

13 hours ago, giganode said:

 

Hey!

I added support for HX1500i on 13th November 2023. You should be good to go. @Reptar reported, that his psu works.

 

Did you apply settings via the settings page? If not, please do and try again.

 

For manual testing open a terminal and type in

corsairmi

 

If you receive an output with actual data everything is fine.

 

i did, but it says:

No compatible devices found.

 

when i i take a look at my system devices i can see my Power Supply:

 

 

This were my settings i tested:

 

 

It says i only need to map the ttyUSBx when i have an AXi PSU, so i left it empty.

 

This is my Dashboard:

 

Any ideas what i can do?

Thanks