4 hours ago, Green Dragon said:

Hita!

 

PROBLEM: GPU Statistics is displaying stats from an old gpu

DETAILS: I recently changed motherboards.  I went from an Intel Xeon to an Intel i7 4790.  I only just installed gpu top and gpu statistics.  When i select 'Unit ID for Dashboard(Multiple):' dropdown it lists '00:02.0: Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller - 0000:00:02.0' which of course was the old gpu prior to replacement.

Running intel_gpu_top from the console reports the following:

 

 

Thoughts?

What do you get from

 

lspci -Dmm | grep -E 'Display|VGA'

cat /tmp/gpujson

cat /boot/config/plugins/gpustat/gpustat.cfg 

timeout -k .500 .600 intel_gpu_top -Jo - -d pci:slot=0000:00:02.0

 

9 hours ago, SimonF said:

What do you get from

 

lspci -Dmm | grep -E 'Display|VGA'

cat /tmp/gpujson

cat /boot/config/plugins/gpustat/gpustat.cfg 

timeout -k .500 .600 intel_gpu_top -Jo - -d pci:slot=0000:00:02.0

 

Thanks for the reply!

Here is the output you requested:

 

root@Battarang:~# lspci -Dmm | grep -E 'Display|VGA'
0000:00:02.0 "VGA compatible controller" "Intel Corporation" "Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller" -r06 -p00 "ASUSTeK Computer Inc." "Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller"

 

root@Battarang:~# cat /tmp/gpujson
Time = Sat, 12 Aug 2023 05:47:10 -0700

root@Battarang:~# cat /boot/config/plugins/gpustat/gpustat.cfg 
VENDOR=""
    GPUID=""
    TEMPFORMAT="C"
    DISPCLOCKS="1"
    DISPENCDEC="1"
    DISPPCIUTIL="1"
    DISPTEMP="1"
    DISPFAN="1"
    DISPPWRDRAW="1"
    DISPPWRSTATE="1"
    DISPTHROTTLE="1"
    DISPSESSIONS="1"
    UIREFRESH="1"
    UIREFRESHINT="1000"
    DISPMEMUTIL="1"
    DISP3DRENDER="1"
    DISPBLITTER="1"
    DISPVIDEO="1"
    DISPVIDENH="1"
    DISPINTERRUPT="1"
    DISPEVENT="1"
    DISPVERTEX="1"
    DISPTEXTURE="1"
    DISPSHADEREXP="1"
    DISPSEQUENCER="1"
    DISPSHADERINTER="1"
    DISPSCANCON="1"
    DISPPRIMASSEM="1"
    DISPDEPTHBLK="1"
    DISPCOLORBLK="1"
    DISPGFXTRANS="1"

 

root@Battarang:~# timeout -k .500 .600 intel_gpu_top -Jo - -d pci:slot=0000:00:02.0

{
        "period": {
                "duration": 0.035772,
                "unit": "ms"
        },
        "frequency": {
                "requested": 0.000000,
                "actual": 0.000000,
                "unit": "MHz"
        },
        "interrupts": {
                "count": 0.000000,
                "unit": "irq/s"
        },
        "rc6": {
                "value": 97.967684,
                "unit": "%"
        },
        "power": {
                "GPU": 0.000000,
                "Package": 0.000000,
                "unit": "W"
        },
        "imc-bandwidth": {
                "reads": 61.424176,
                "writes": 23.887180,
                "unit": "MiB/s"
        },
        "engines": {
                "Render/3D/0": {
                        "busy": 0.000000,
                        "sema": 0.000000,
                        "wait": 0.000000,
                        "unit": "%"
                },
                "Blitter/0": {
                        "busy": 0.000000,
                        "sema": 0.000000,
                        "wait": 0.000000,
                        "unit": "%"
                },
                "Video/0": {
                        "busy": 0.000000,
                        "sema": 0.000000,
                        "wait": 0.000000,
                        "unit": "%"
                },
                "VideoEnhance/0": {
                        "busy": 0.000000,
                        "sema": 0.000000,
                        "wait": 0.000000,
                        "unit": "%"
                }
        }
}root@Battarang:~# 

52 minutes ago, Green Dragon said:

"Intel Corporation" "Xeon E3-1200 v3/4th Gen Core

This is how system reports in lspci as I think it is the same gpu type on cpu

4 hours ago, SimonF said:

This is how system reports in lspci as I think it is the same gpu type on cpu

 

So, the 'Xeon E3-1200 v3/4th Gen Core' is the correct video processor for the i7?

1 minute ago, Green Dragon said:

 

So, the 'Xeon E3-1200 v3/4th Gen Core' is the correct video processor for the i7?

Yes

1 hour ago, SimonF said:

Yes

 

I kept seeing this in my inbox and and didn't think someone was still running Haswell iGPU like me on my kids gaming PC.


I can confirm that my Haswell i5-4570s would have its Intel Graphics 4600 show up as Xeon as well before I installed the Intel driver in Windows.

16 hours ago, axipher said:

 

I kept seeing this in my inbox and and didn't think someone was still running Haswell iGPU like me on my kids gaming PC.


I can confirm that my Haswell i5-4570s would have its Intel Graphics 4600 show up as Xeon as well before I installed the Intel driver in Windows.

Thank you very much!

Hi, was there ever a fix for no power showing for the 1050 series?

13 minutes ago, DaMAN said:

Hi, was there ever a fix for no power showing for the 1050 series?

This plugin is dependant on the driver package to provide the values.

 

root@computenode:~# nvidia-smi -q -x -g 0 | grep power_draw
                        <power_draw>8.39 W</power_draw>

 

Can you post the output of

nvidia-smi -q -x -g 0

Under the broken plugins section of the 6.12 build notes it says:

 

Quote

gpustat version 2022.11.30a (GPU Statistics by b3rs3rk, breaks the dashboard)

Switch to GPU Statistics by SimonF

 

Where can I find the build by SimonF ?

 

 

*EDIT* Thank you, it was under apps. 

Edited August 24, 20232 yr by Lobus

2 minutes ago, Lobus said:

Under the broken plugins section of the 6.12 build notes it says:

 

 

Where can I find the build by SimonF ?

Under the Apps tab

 

I am so glad to see this, so thank you to everyone who has worked to make this a reality.  I am going to give it a shot and remove my Quadro card.  I am using a Ryzen 5700G on 6.12.3 stable, I have added the rest of the instructions with zero difficulty.

 

I do need help and someone to hold my hand.  When installing the container the directions say "- At 'Device' at the bottom here in the template add '/dev/dri' "  My assumption is "Add another port, path, variable or device" but I am more of a hardware person.  Is that correct?  While researching I see where others have added it in "Extra Parameters" but that seems wrong to me.

43 minutes ago, SirReal63 said:

I am going to give it a shot and remove my Quadro card.  I am using a Ryzen 5700G on 6.12.3 stable, I have added the rest of the instructions with zero difficulty.

I assume you are talking about transcoding, what are you using Emby/Jellyfin/Plex?

 

Just as a heads up Plex officially doesn't support AMD transcoding but I think there is a Docker mod for the Linuxserver.io container and a custom version from the official Plex container around -> but this would be better suited in one of the support threads from the containers.

 

Only Emby and Jellyfin support that OOB, at least the official containers for sure and I also think the Linuxserver.io container.

You can at least find more information about Emby here and the Linuxserver.io Jellyfin container here (that's only what I found after a quick search and as said, I'm not an expert with AMD because I got no hardware on hand).

 

45 minutes ago, SirReal63 said:

My assumption is "Add another port, path, variable or device" but I am more of a hardware person.  Is that correct?

Yes, select "Device" from the drop down and at value enter "/dev/dri" (without double quotes).

If you are trying to transcode HDR content I think you need another device too but I'm not too sure about that because I have no AMD hardware on hand.

 

46 minutes ago, SirReal63 said:

While researching I see where others have added it in "Extra Parameters" but that seems wrong to me.

This does basically the same.

48 minutes ago, ich777 said:

I assume you are talking about transcoding, what are you using Emby/Jellyfin/Plex?

 

Just as a heads up Plex officially doesn't support AMD transcoding but I think there is a Docker mod for the Linuxserver.io container and a custom version from the official Plex container around -> but this would be better suited in one of the support threads from the containers.

 

Only Emby and Jellyfin support that OOB, at least the official containers for sure and I also think the Linuxserver.io container.

You can at least find more information about Emby here and the Linuxserver.io Jellyfin container here (that's only what I found after a quick search and as said, I'm not an expert with AMD because I got no hardware on hand).

 

Yes, select "Device" from the drop down and at value enter "/dev/dri" (without double quotes).

If you are trying to transcode HDR content I think you need another device too but I'm not too sure about that because I have no AMD hardware on hand.

 

This does basically the same.

Using Jellyfin, I gave up on Plex, our needs are basic.  This is basically a learning experiment for me and I want to do it right.

 

I appreciate the confirmation and assistance.

It worked exactly as it should.  Prior to this I could not watch 4k movies at my desk from Jellyfin, I had to use my desktop computer and use VLC because Jellyfin would not play it on anything but the 4k TV.

I have a amd firepro 4100 installed
Unfortunately its not showing any metrics. the raeon top app is installed. Possibly not compatible with this model?

 

7 minutes ago, only-university6482 said:

I have a amd firepro 4100 installed
Unfortunately its not showing any metrics. the raeon top app is installed. Possibly not compatible with this model?

 

What output do you get from

root@computenode:~# radeontop -d - -l 1
Dumping to -, line limit 1.
1693844440.324854: bus 0d, gpu 0.00%, ee 0.00%, vgt 0.00%, ta 0.00%, sx 0.00%, sh 0.00%, spi 0.00%, sc 0.00%, pa 0.00%, db 0.00%, cb 0.00%, vram 0.39% 15.62mb, gtt 0.07% 11.84mb, mclk 9.60% 0.096ghz, sclk 21.55% 0.500ghz
root@computenode:~# 

3 hours ago, SimonF said:

What output do you get from

root@computenode:~# radeontop -d - -l 1
Dumping to -, line limit 1.
1693844440.324854: bus 0d, gpu 0.00%, ee 0.00%, vgt 0.00%, ta 0.00%, sx 0.00%, sh 0.00%, spi 0.00%, sc 0.00%, pa 0.00%, db 0.00%, cb 0.00%, vram 0.39% 15.62mb, gtt 0.07% 11.84mb, mclk 9.60% 0.096ghz, sclk 21.55% 0.500ghz
root@computenode:~# 

Dumping to -, line limit 1.
1693858369.175237: bus 0a, gpu 0.00%, ee 0.00%, vgt 0.00%, ta 0.00%, sx 0.00%, sh 0.00%, spi 0.00%, sc 0.00%, pa 0.00%, db 0.00%, cb 0.00%, vram 20.03% 405.44mb, gtt 0.76% 113.99mb, mclk 97.14% 1.166ghz, sclk 14.29% 0.200ghz

7 minutes ago, only-university6482 said:

Dumping to -, line limit 1.
1693858369.175237: bus 0a, gpu 0.00%, ee 0.00%, vgt 0.00%, ta 0.00%, sx 0.00%, sh 0.00%, spi 0.00%, sc 0.00%, pa 0.00%, db 0.00%, cb 0.00%, vram 20.03% 405.44mb, gtt 0.76% 113.99mb, mclk 97.14% 1.166ghz, sclk 14.29% 0.200ghz

Can you confirm which version of the plugin you are using Unraid OS vers and I will use you data to see if I can find an issue.

 

Can you also provide please

 

lspci -Dmm | grep VGA

 

Maybe issue with the format of the lspci for you card.Mine for example.

 

root@computenode:~# lspci -Dmm | grep VGA
0000:00:02.0 "VGA compatible controller" "Intel Corporation" "AlderLake-S GT1" -r0c -p00 "Micro-Star International Co., Ltd. [MSI]" "AlderLake-S GT1"
0000:03:00.0 "VGA compatible controller" "Intel Corporation" "DG2 [Arc A770]" -r08 -p00 "Intel Corporation" "Device 1020"
0000:09:00.0 "VGA compatible controller" "NVIDIA Corporation" "GK106GL [Quadro K4000]" -ra1 -p00 "NVIDIA Corporation" "GK106GL [Quadro K4000]"
0000:0d:00.0 "VGA compatible controller" "Advanced Micro Devices, Inc. [AMD/ATI]" "Navi 24 [Radeon RX 6400/6500 XT/6500M]" -rc7 -p00 "XFX Limited" "Navi 24 [Radeon RX 6400 / 6500 XT]"
root@computenode:~# 

 

44 minutes ago, SimonF said:

Can you confirm which version of the plugin you are using Unraid OS vers and I will use you data to see if I can find an issue.

 

Can you also provide please

 

lspci -Dmm | grep VGA

 

Maybe issue with the format of the lspci for you card.Mine for example.

 

root@computenode:~# lspci -Dmm | grep VGA
0000:00:02.0 "VGA compatible controller" "Intel Corporation" "AlderLake-S GT1" -r0c -p00 "Micro-Star International Co., Ltd. [MSI]" "AlderLake-S GT1"
0000:03:00.0 "VGA compatible controller" "Intel Corporation" "DG2 [Arc A770]" -r08 -p00 "Intel Corporation" "Device 1020"
0000:09:00.0 "VGA compatible controller" "NVIDIA Corporation" "GK106GL [Quadro K4000]" -ra1 -p00 "NVIDIA Corporation" "GK106GL [Quadro K4000]"
0000:0d:00.0 "VGA compatible controller" "Advanced Micro Devices, Inc. [AMD/ATI]" "Navi 24 [Radeon RX 6400/6500 XT/6500M]" -rc7 -p00 "XFX Limited" "Navi 24 [Radeon RX 6400 / 6500 XT]"
root@computenode:~# 

 

Vs: 6.12.4

 

root@Tower500:~# lspci -Dmm | grep VGA
0000:01:00.0 "VGA compatible controller" "NVIDIA Corporation" "GM204 [GeForce GTX 970]" -ra1 -p00 "ASUSTeK Computer Inc." "GM204 [GeForce GTX 970]"
0000:04:00.0 "VGA compatible controller" "Advanced Micro Devices, Inc. [AMD/ATI]" "Cape Verde GL [FirePro W4100]" -p00 "Dell" "Cape Verde GL [FirePro W4100]"
0000:0a:00.0 "VGA compatible controller" "Advanced Micro Devices, Inc. [AMD/ATI]" "Picasso/Raven 2 [Radeon Vega Series / Radeon Vega Mobile Series]" -rc8 -p00 "Advanced Micro Devices, Inc. [AMD/ATI]" "Picasso"

 

Many thanks!

9 minutes ago, only-university6482 said:

Vs: 6.12.4

 

root@Tower500:~# lspci -Dmm | grep VGA
0000:01:00.0 "VGA compatible controller" "NVIDIA Corporation" "GM204 [GeForce GTX 970]" -ra1 -p00 "ASUSTeK Computer Inc." "GM204 [GeForce GTX 970]"
0000:04:00.0 "VGA compatible controller" "Advanced Micro Devices, Inc. [AMD/ATI]" "Cape Verde GL [FirePro W4100]" -p00 "Dell" "Cape Verde GL [FirePro W4100]"
0000:0a:00.0 "VGA compatible controller" "Advanced Micro Devices, Inc. [AMD/ATI]" "Picasso/Raven 2 [Radeon Vega Series / Radeon Vega Mobile Series]" -rc8 -p00 "Advanced Micro Devices, Inc. [AMD/ATI]" "Picasso"

 

Many thanks!

Ok data was from internal gpu.

 

radeontop -d - -l 1 -b 04 will show the other gpu 

2 hours ago, SimonF said:

Ok data was from internal gpu.

 

radeontop -d - -l 1 -b 04 will show the other gpu 

Thanks!

root@Tower500:~# radeontop -d - -l 1 -b 04
Dumping to -, line limit 1.
1693870316.741081: bus 04, gpu 0.00%, ee 0.00%, vgt 0.00%, ta 0.00%, sx 0.00%, sh 0.00%, spi 0.00%, sc 0.00%, pa 0.00%, db 0.00%, cb 0.00%, uvd 0.00%, vce0 0.00%, vram 0.29% 5.92mb, gtt 0.21% 4.20mb, mclk inf% 0.150ghz, sclk 47.62% 0.300ghz

16 hours ago, only-university6482 said:

Thanks!

root@Tower500:~# radeontop -d - -l 1 -b 04
Dumping to -, line limit 1.
1693870316.741081: bus 04, gpu 0.00%, ee 0.00%, vgt 0.00%, ta 0.00%, sx 0.00%, sh 0.00%, spi 0.00%, sc 0.00%, pa 0.00%, db 0.00%, cb 0.00%, uvd 0.00%, vce0 0.00%, vram 0.29% 5.92mb, gtt 0.21% 4.20mb, mclk inf% 0.150ghz, sclk 47.62% 0.300ghz

Can you provide output of the follow

sensors amdgpu-pci-0400

 

I have found the card provides more info that a normal one.

 

nano /usr/local/emhttp/plugins/gpustat/lib/AMD.php

 

This is a fix I have found so far and at around line 58 change

 

        'sclk'  => ['clockutil', 'clock', 'clocks'],
    ];

 

to

        'sclk'  => ['clockutil', 'clock', 'clocks'],
        'uvd'   => ['uvd'],
        'vce0'  => ['vce'],
    ];

 

1 hour ago, SimonF said:

Can you provide output of the follow

sensors amdgpu-pci-0400

 

I have found the card provides more info that a normal one.

 

nano /usr/local/emhttp/plugins/gpustat/lib/AMD.php

 

This is a fix I have found so far and at around line 58 change

 

        'sclk'  => ['clockutil', 'clock', 'clocks'],
    ];

 

to

        'sclk'  => ['clockutil', 'clock', 'clocks'],
        'uvd'   => ['uvd'],
        'vce0'  => ['vce'],
    ];

 

Thanks. I'll back to you soon. Card currently removed from system now as I do not believe it was being utilized, just consuming energy. My frigate hardware acceleration was using the integrated graphics on the cpu (3200g) I think. Works well and probably more efficient.
Tried the HW on the nvidia and temp rose by 23c!! Turned that off!

 

3 minutes ago, only-university6482 said:

Thanks. I'll back to you soon. Card currently removed from system now as I do not believe it was being utilized, just consuming energy. My frigate hardware acceleration was using the integrated graphics on the cpu (3200g) I think. Works well and probably more efficient.
Tried the HW on the nvidia and temp rose by 23c!! Turned that off!

 

No worries