10 hours ago, Vulkandr said:

First time installing the plugin, as others on this page of the support thread have mentioned, I get a "Vendor command returned unparseable data" error message. I have a Nvidia 1070ti with the latest gpu driver installed. The gpu is attached to plex for transcoding, not sure if that could affect things. It is not attached to a VM. I do have it selected in the settings.

Can you provide output of nvidia-smi -q -x

On 11/27/2024 at 3:51 AM, SimonF said:

That looks like intel GPU top is not working do you have the latest version

Yes. I have the latest version of it. I even restart unraid and still the same. 🤷‍♂️

 

Edited November 28, 20241 yr by HHUBS

 

This is dead for me. I have the latest version this is on an intel iGPU

Just now, xokia said:

 

This is dead for me. I have the latest version this is on an intel iGPU

Scroll down to the intel top timers and change to .7 1.3

Hi I have the intel Arc A750 graphics card in my server and I cannot get it to work with GPU statistics.

Not sure what setting need to be changed, the intel_gpu_top and gpu statistics plugins are updated to the latest version.

6 hours ago, shadowgt11 said:

Hi I have the intel Arc A750 graphics card in my server and I cannot get it to work with GPU statistics.

Not sure what setting need to be changed, the intel_gpu_top and gpu statistics plugins are updated to the latest version.

Kernel support for arc is not in 6.12.x you need will to run 7.

On 11/28/2024 at 11:35 AM, SimonF said:

Scroll down to the intel top timers and change to .7 1.3

That worked thanks

After the latest update GPU statistics does not show anything anymore. It states that "no gpu is selected", but the GPU selector in the settings part does not work. Trying to click open the selection box does not work and my intel igpu's name is shown below it but is not selectable in any way.

24 minutes ago, Helmonder said:

After the latest update GPU statistics does not show anything anymore. It states that "no gpu is selected", but the GPU selector in the settings part does not work. Trying to click open the selection box does not work and my intel igpu's name is shown below it but is not selectable in any way.

Can you provide a screen print, you using chrome browser?

Using Edge (but thats chromium so should be the same..) !  Screenshot is attached,

 

I was able to set the iGPU using safari on my iphone. It now reports the device on the dashboard but gpu stats are still not shown while I am positive it is transcoding like h*ll (just installed Tdarr).

Edited November 30, 20241 yr by Helmonder

56 minutes ago, Helmonder said:

Using Edge (but thats chromium so should be the same..) !  Screenshot is attached,

 

I was able to set the iGPU using safari on my iphone. It now reports the device on the dashboard but gpu stats are still not shown while I am positive it is transcoding like h*ll (just installed Tdarr).

What version of the plugin are you running?

Why 2025 so soon?

 

7 hours ago, DogeKitteh007 said:

Why 2025 so soon?

 

Fixed thanks.

21 hours ago, SimonF said:

What version of the plugin are you running?

2024.11.28

 

My second message that the stats were not showing appears to not be correct, it is working now.. I must have seen that wrong yesterday.

 

The selection issue hower is correct, in Edge I cannot change the GPU in the settings, I tried on two different pc's to be sure and also tried Chrome. This does work in Safari on my iphone (which is where i made the correct settings and it is now running fine again, if i however now go into settings in Edge or Chrome the setting still appears wrong and if I press apply it is wrong again.

On 12/1/2024 at 1:14 PM, Helmonder said:

2024.11.28

 

My second message that the stats were not showing appears to not be correct, it is working now.. I must have seen that wrong yesterday.

 

The selection issue hower is correct, in Edge I cannot change the GPU in the settings, I tried on two different pc's to be sure and also tried Chrome. This does work in Safari on my iphone (which is where i made the correct settings and it is now running fine again, if i however now go into settings in Edge or Chrome the setting still appears wrong and if I press apply it is wrong again.

 

I have the exact same issue, also using plugin version 2024.11.28. In chrome I can see the GPU listed on the left, but cannot select it in the dropdown. Launching Safari lets me select the GPU in the dropdown. Then stats are showing just fine on the dashboard.

I also have an issue, I installed "Intel GPU TOP" and "GPU Statistics". All I have in my dashboard is "No GPUs selected - Select GPU(s) in GPUStat settings page and apply." But I can select anything in the "Unit ID for Dashboard(Multiple):"

Unraid 7.0.0-beta.4

i9 14900k -> UHD770

 

have the same issue. cant select. Tried with Brave and Edge, not working.

 

The trick with the Iphone + Safari worked. i can select it there...

11 minutes ago, Cornflake said:

have the same issue. cant select. Tried with Brave and Edge, not working.

 

The trick with the Iphone + Safari worked. i can select it there...

Are you are running 2024.11.28?

5 minutes ago, SimonF said:

Are you are running 2024.11.28?

 

Yes. and unraid 7.0.0-rc.1

8 minutes ago, Cornflake said:

 

Yes. and unraid 7.0.0-rc.1

I have just repackaged the plugin update to 2024.12.03 and test to see if that fixes.

3 minutes ago, SimonF said:

I have just repackaged the plugin update to 2024.12.03 and test to see if that fixes.

its working again  thanks

8 hours ago, SimonF said:

I have just repackaged the plugin update to 2024.12.03 and test to see if that fixes.

Solved !  Thanks for your support !

I just tried to login into my WebGUI this morning, Error 500.
Dockers still working.

I logged into cli via IPMI, htop, no performance issues, RAM and CPU cruising.

Tried restarting the webgui process via "/etc/rc.d/rc.php-fpm restart", didn't work.

Found a thread saying GPU Statistics might be the culprit here

So I tried "plugin remove gpustat.plg" and restarted php-fpm.

Back online !

 

So there seems to be a serious issue with the plugin that makes php-fpm crash or something.

 

@SimonF what do you need to check on that ? I didn't reboot, so I might still have some relevant logs.

1 hour ago, Altheran said:

I just tried to login into my WebGUI this morning, Error 500.
Dockers still working.

I logged into cli via IPMI, htop, no performance issues, RAM and CPU cruising.

Tried restarting the webgui process via "/etc/rc.d/rc.php-fpm restart", didn't work.

Found a thread saying GPU Statistics might be the culprit here

So I tried "plugin remove gpustat.plg" and restarted php-fpm.

Back online !

 

So there seems to be a serious issue with the plugin that makes php-fpm crash or something.

 

@SimonF what do you need to check on that ? I didn't reboot, so I might still have some relevant logs.

I am just looking for the fanlog 

 

root@Tower:~# cat /var/log/ipmifan 
2024-12-04 17:16:28 Starting Fan Control
2024-12-04 17:16:28 Board: Supermicro Board Model: X10SL7-F
2024-12-04 17:16:28 SM Board selection: 10
2024-12-04 17:16:28 Setting fans to full speed
2024-12-04 17:16:39 Fan:Temp, FAN1234(34%):HDD Spundown using System Temp(40 °C), FANA(43%):CPU Temp(45 °C)
2024-12-04 17:17:39 Fan:Temp, FAN1234(38%):HDD Spundown using System Temp(42 °C), FANA(38%):CPU Temp(42 °C)
root@Tower:~# 
 

I just want to say thank you to the forums here. I had an issue, but it was resolved with the suggestions of other people here.

Keep up the great work developer(s), and hopefully everyone else has a good day!