188pilas Posted December 1, 2020 Share Posted December 1, 2020 does the kernel include the mlxconfig tool as well? or just the mstflint to burn firmware? Quote Link to comment
ich777 Posted December 1, 2020 Author Share Posted December 1, 2020 Yes it is included. But keep in mind since beta35 there ara plugins available and this tool isn't needed anymore. You have to upgrade first to beta35 amd then you will see the plugins in the CA App Quote Link to comment
188pilas Posted December 2, 2020 Share Posted December 2, 2020 I updated to beta35 but seems only the mstflint tool is included...or did I miss something? Quote Link to comment
ich777 Posted December 2, 2020 Author Share Posted December 2, 2020 1 hour ago, 188pilas said: I updated to beta35 but seems only the mstflint tool is included...or did I miss something? I will look this up and report back. Quote Link to comment
ich777 Posted December 2, 2020 Author Share Posted December 2, 2020 4 hours ago, 188pilas said: awesome thx! The answer is rather simple, I noticed that you are using 'mlxconfig' instead use 'mstconfig' (if you type in 'mst' and then tab two times it shows which files are installed) I think the mlxconfig is part of the closed source package and the mstconfig is part of the open source package. Quote Link to comment
188pilas Posted December 2, 2020 Share Posted December 2, 2020 3 hours ago, ich777 said: The answer is rather simple, I noticed that you are using 'mlxconfig' instead use 'mstconfig' (if you type in 'mst' and then tab two times it shows which files are installed) I think the mlxconfig is part of the closed source package and the mstconfig is part of the open source package. Thanks you are correct!! Let me test out changing the config on one of the 10gb cards. 1 Quote Link to comment
curtp Posted December 5, 2020 Share Posted December 5, 2020 (edited) Does anyone know if the Xbox One Digital TV Tuner work with this DVB Plugin in Plex on Unraid with this. Thanks Edited December 5, 2020 by curtp Quote Link to comment
ich777 Posted December 5, 2020 Author Share Posted December 5, 2020 30 minutes ago, curtp said: Does anyone know if the Xbox One Digital TV Tuner work with this DVB Plugin in Plex on Unraid with this. Thanks On which unraid version are you? I would recommend to use the libreelec drivers becazse this drivers are also included there. Quote Link to comment
curtp Posted December 5, 2020 Share Posted December 5, 2020 15 minutes ago, ich777 said: On which unraid version are you? I would recommend to use the libreelec drivers becazse this drivers are also included there. Thanks for the reply and 6.8.3 . Is that in the Helper/Builder Docker. Thanks Quote Link to comment
ich777 Posted December 5, 2020 Author Share Posted December 5, 2020 28 minutes ago, curtp said: Thanks for the reply and 6.8.3 . Is that in the Helper/Builder Docker. Thanks Okay. Yes, actually there are prebuilt images available on the bottom of the first post so you don't have to build it yourself. Quote Link to comment
curtp Posted December 5, 2020 Share Posted December 5, 2020 3 minutes ago, ich777 said: Okay. Yes, actually there are prebuilt images available on the bottom of the first post so you don't have to build it yourself. Oh thank you for the help. Much appreciated 1 Quote Link to comment
curtp Posted December 6, 2020 Share Posted December 6, 2020 (edited) Hope you don't mind me asking is it this one that will work *linkremoved* Thanks Edited December 6, 2020 by ich777 Removed tynurl link Quote Link to comment
ich777 Posted December 6, 2020 Author Share Posted December 6, 2020 58 minutes ago, curtp said: Hope you don't mind me asking is it this one that will work *linkremoved* Thanks Yes, this should be it. Quote Link to comment
curtp Posted December 7, 2020 Share Posted December 7, 2020 (edited) I don't know if this is the right place to ask but would anyone mind helping me with how I would get the xbox usb to show up in Plex. I know it is supposed to show up as a hdhomerun by using TVHeadEnd but I can't see anywhere in TVHeadEnd that will allow Plex to use it. Thanks Edited December 7, 2020 by curtp Quote Link to comment
almulder Posted December 8, 2020 Share Posted December 8, 2020 So not sure if this is a unraid issue, nvida driver issue, or a docker image issue. Hopefuly someone can let me know how to fix. My unraid has 2 video card connected. One is for plex and the other for a gamming VM when they fix usb passthrough issues. So I have plex setup to use GPU0 but it keeps using GPU1. I have verified that the Docker is pointing to the correct GPU, but its using the other GPU Here you see its using my RTX2070 instead of my GTX1050ti Here you see the GPU Ids that need to be passed through to plex: Note the GTX1050ti and here is my setting in Plex Docker. Note it shows the GTX1050ti Quote Link to comment
ich777 Posted December 8, 2020 Author Share Posted December 8, 2020 8 hours ago, curtp said: I don't know if this is the right place to ask but would anyone mind helping me with how I would get the xbox usb to show up in Plex. I know it is supposed to show up as a hdhomerun by using TVHeadEnd but I can't see anywhere in TVHeadEnd that will allow Plex to use it. Thanks Which plex container are you using? I have a report in my DVB-Driver thread that some containers doesn't work or at least the tuner doesn't show up. 4 hours ago, almulder said: So not sure if this is a unraid issue, nvida driver issue, or a docker image issue. Hopefuly someone can let me know how to fix. My unraid has 2 video card connected. One is for plex and the other for a gamming VM when they fix usb passthrough issues. Can you give me the output of 'nvidia-smi -L' from a Unraid terminal (eventually my plugin is messing up something...)? Quote Link to comment
curtp Posted December 8, 2020 Share Posted December 8, 2020 7 hours ago, ich777 said: Which plex container are you using? I have a report in my DVB-Driver thread that some containers doesn't work or at least the tuner doesn't show up. I am using the linuxserver one and is it possible to get plex to see the usb tuner without having to use tvheadend. Thanks Quote Link to comment
ich777 Posted December 8, 2020 Author Share Posted December 8, 2020 40 minutes ago, curtp said: I am using the linuxserver one and is it possible to get plex to see the usb tuner without having to use tvheadend. Thanks I think it would be better to ask in the Plex forums directly if this tuner works in Plex itself or if you also need a dedicated Tvheadend installation. Eventually @alturismo can help? 1 Quote Link to comment
alturismo Posted December 8, 2020 Share Posted December 8, 2020 @curtp and may to keep it cleaner and ppl can follow, you installed the plugin, now, did you also install a driver ? like libreelec, tbs, ... ? the plugin is just the base, then u install the driver, then if you see the the tuner its a matter if plex supports it or not, if plex supports it u can add it nativ there add a device like /dev/dvb to the plex docker u use if its not supported by plex but can be used in tvheadend, (also /dev/dvb ...) then u need a "bridge" like xteve which will be useable in plex as hdhr device ... tvheadend native in plex is not supported (yet). step 1, install a driver (i think TBS supports your xbox tuner) step 2, check plex if tuner is detected (after adding device to docker), as you can read at plex it should be supported ... rest you will figure yourself how to scan channels and use plex epg ps. double posting in forums is not a nice attitude 1 Quote Link to comment
curtp Posted December 8, 2020 Share Posted December 8, 2020 (edited) 38 minutes ago, alturismo said: @curtp and may to keep it cleaner and ppl can follow, you installed the plugin, now, did you also install a driver ? like libreelec, tbs, ... ? the plugin is just the base, then u install the driver, then if you see the the tuner its a matter if plex supports it or not, if plex supports it u can add it nativ there add a device like /dev/dvb to the plex docker u use if its not supported by plex but can be used in tvheadend, (also /dev/dvb ...) then u need a "bridge" like xteve which will be useable in plex as hdhr device ... tvheadend native in plex is not supported (yet). step 1, install a driver (i think TBS supports your xbox tuner) step 2, check plex if tuner is detected (after adding device to docker), as you can read at plex it should be supported ... rest you will figure yourself how to scan channels and use plex epg ps. double posting in forums is not a nice attitude So I did install the plugin but I don't know which one (If any) I need to install for the driver but since you mentioned It I will try it. Also I've never heard of xteve so I will try that too. I am very thankful for the help. Also I did not mean to double post then, I had just thought maybe other people in different forum someone might know something different. Thanks, much appreciated for the help. Edited December 8, 2020 by curtp Quote Link to comment
almulder Posted December 8, 2020 Share Posted December 8, 2020 11 hours ago, ich777 said: Can you give me the output of 'nvidia-smi -L' from a Unraid terminal (eventually my plugin is messing up something...)? GPU 0: GeForce GTX 1050 Ti (UUID: GPU-5cfccbc3-f92f-4203-80c0-aabd87a7405e) GPU 1: GeForce RTX 2070 (UUID: GPU-d5863e19-c2ed-6e72-8b48-3f28a09eb25d) Quote Link to comment
ich777 Posted December 8, 2020 Author Share Posted December 8, 2020 4 minutes ago, almulder said: GPU 0: GeForce GTX 1050 Ti (UUID: GPU-5cfccbc3-f92f-4203-80c0-aabd87a7405e) GPU 1: GeForce RTX 2070 (UUID: GPU-d5863e19-c2ed-6e72-8b48-3f28a09eb25d) You are on 6.8.3 or am I wrong? Is it a option that you upgrade to Unraid6.9.0 beta35? There would be the option to bind the RTX2070 to VFIO and so Unraid wouldn't see the card. This is actually a real strange issue, it could also be that in the container something is overriding which card it can see/use so that it has access to all cards like if you define a variable with the key 'NVIDIA_VISIBLE_DEVICES' and as value 'all' Quote Link to comment
almulder Posted December 8, 2020 Share Posted December 8, 2020 1 hour ago, ich777 said: You are on 6.8.3 or am I wrong? Is it a option that you upgrade to Unraid6.9.0 beta35? There would be the option to bind the RTX2070 to VFIO and so Unraid wouldn't see the card. This is actually a real strange issue, it could also be that in the container something is overriding which card it can see/use so that it has access to all cards like if you define a variable with the key 'NVIDIA_VISIBLE_DEVICES' and as value 'all' I upgraded to beta35 and then setup the new video card. I will be binding the videocard to my vm here shortly. I will let you know if there are other issues. Quote Link to comment
ich777 Posted December 8, 2020 Author Share Posted December 8, 2020 11 minutes ago, almulder said: I upgraded to beta35 and then setup the new video card. I will be binding the videocard to my vm here shortly. I will let you know if there are other issues. Please note to bind a device to VFIO go to Tools -> System devices -> tick the boxes that you want to bind -> click Bind to VFIO on boot EDIT: There is a plugin available for Nvidia,... now if you haven't seen that already, but you have to be at least on Unraid 6.9.0 beta35 to see it in the CA App. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.