ran Posted February 5, 2023 Share Posted February 5, 2023 On 1/24/2023 at 3:11 PM, ich777 said: I've pushed a fix to the plugin and it should not work as intended. There was an issue in the old package detection routine which is now fixed, please update the plugin and upgrade to Unraid 6.11.5, it should work right OOB. iscsi虚拟磁盘无法使用UEFI引导Windows 11启动,但是使用旧BIOS可以正常使用,好像是iscsi没有加载iBFT表,请问改如何解决?谢谢你 Quote Link to comment
Killersplace Posted February 12, 2023 Share Posted February 12, 2023 hi al i am new to ISCSI i installed the plugin en uset the guide in there and all seems ok but in windows side i can add the iscsi but when i try to connect it cant i get Authorization failed Quote Link to comment
SimonF Posted February 12, 2023 Author Share Posted February 12, 2023 (edited) 39 minutes ago, Killersplace said: hi al i am new to ISCSI i installed the plugin en uset the guide in there and all seems ok but in windows side i can add the iscsi but when i try to connect it cant i get Authorization failed Does you Initiators tab look Similar to this? Edited February 12, 2023 by SimonF Quote Link to comment
Killersplace Posted February 12, 2023 Share Posted February 12, 2023 i cant see anything !! here is my pics Quote Link to comment
Killersplace Posted February 12, 2023 Share Posted February 12, 2023 and windows side sorry its in swedish but you can tell i hope Quote Link to comment
SimonF Posted February 12, 2023 Author Share Posted February 12, 2023 5 minutes ago, Killersplace said: i cant see anything !! here is my pics You need to create the IQN for the windows machine. And add a mapping. Quote Link to comment
Killersplace Posted February 12, 2023 Share Posted February 12, 2023 ok i thot i did it already and did it again and now it works THX Quote Link to comment
Killersplace Posted February 12, 2023 Share Posted February 12, 2023 hmmm its not 100% ok i cant use it Quote Link to comment
Killersplace Posted February 12, 2023 Share Posted February 12, 2023 this is an test drive do i nead to do something whit it in unraid ? Quote Link to comment
SimonF Posted February 12, 2023 Author Share Posted February 12, 2023 5 minutes ago, Killersplace said: this is an test drive do i nead to do something whit it in unraid ? No it needs to be unassiged and not in use in Unraid as the whole block device will be availble to the windows machine. Is the drive formated to a non Windows readable format? Quote Link to comment
Killersplace Posted February 12, 2023 Share Posted February 12, 2023 its not in use and no file system its the one whit the line over it Quote Link to comment
Killersplace Posted February 12, 2023 Share Posted February 12, 2023 do i nead to have NTFS partition on it ? Quote Link to comment
ich777 Posted February 12, 2023 Share Posted February 12, 2023 1 hour ago, Killersplace said: do i nead to have NTFS partition on it ? No, you do everything on the Initiator side, so to speak Windows. You have to fist initialize the disk in Windows, right-click on the box at the beginning where it says: Disk2 and not on the not allocated space, you will then get a different pop up where you can initialize the disk and after that you can create a partition on it at the not allocated space. 1 hour ago, Killersplace said: its not in use and no file system its the one whit the line over it Please don't do anything on Unraid directly, you will certainly destroy the disk layout. Quote Link to comment
Killersplace Posted February 12, 2023 Share Posted February 12, 2023 ok i understand but in the windows side i dont get the initialize disk ! thats the problem Quote Link to comment
ich777 Posted February 12, 2023 Share Posted February 12, 2023 44 minutes ago, Killersplace said: ok i understand but in the windows side i dont get the initialize disk ! thats the problem Are you sure that the disk is working properly? Have you yet tried diskpart (CLI Tool) on Windows to format it? <- please be very careful with diskpart! Something like: list disk select disk 2 clean create partition primary ...should do the job just fine, but as said, please make sure after doing "list disk" that you check that disk 2 is actually the iSCSI disk, if you get any error message you should know what the issue is. Quote Link to comment
Killersplace Posted February 12, 2023 Share Posted February 12, 2023 i tested some disktools an they say the disk is READ ONLY Quote Link to comment
Killersplace Posted February 12, 2023 Share Posted February 12, 2023 meaby the disk is bad but in unraid i have used it before but i am emptying an other disk that i can test whit Quote Link to comment
ich777 Posted February 12, 2023 Share Posted February 12, 2023 Just now, Killersplace said: meaby the disk is bad but in unraid i have used it before but i am emptying an other disk that i can test whit Look at your screenshot from above: Do you see where the issue is? Please remove the drive from the Windows Initiator side, after that remove it in the iSCSI plugin and then add it again and make sure that you do NOT click "Read Only". 1 Quote Link to comment
Killersplace Posted February 12, 2023 Share Posted February 12, 2023 OMG now i just feel stupid the read only thing wasent obies i that it was for ID to the disk but now it works i whan to thank you so mutch fore the help 1 Quote Link to comment
Killersplace Posted February 12, 2023 Share Posted February 12, 2023 one more Q is there a limit how meany ISCSI Disk i kan passthrue ? Quote Link to comment
ich777 Posted February 12, 2023 Share Posted February 12, 2023 5 minutes ago, Killersplace said: one more Q is there a limit how meany ISCSI Disk i kan passthrue ? I think 256. 1 Quote Link to comment
antihero412 Posted March 24, 2023 Share Posted March 24, 2023 Would it be possible to use a zvol now that unraid has ZFS i can create the zvol fine but cant seem to map to it under devices its only showing the /dev/sda and not /dev/zvol Quote Link to comment
SimonF Posted March 24, 2023 Author Share Posted March 24, 2023 11 hours ago, antihero412 said: Would it be possible to use a zvol now that unraid has ZFS i can create the zvol fine but cant seem to map to it under devices its only showing the /dev/sda and not /dev/zvol At present you can add via targetcli root@computenode:/dev# targetcli targetcli shell version 2.1.54 Copyright 2011-2013 by Datera, Inc and others. For help on commands, type 'help'. /backstores/block> ls o- block ...................................................................................................... [Storage Objects: 0] /backstores/block> help GENERALITIES ============ This is a shell in which you can create, delete and configure configuration objects. The available commands depend on the current path or target path you want to run a command in: different path have different sets of available commands, i.e. a path pointing at an iSCSI target will not have the same available commands as, say, a path pointing at a storage object. The prompt that starts each command line indicates your current path. Alternatively (useful if the prompt displays an abbreviated path to save space), you can run the `pwd` command to display the complete current path. Navigating the tree is done using the `cd` command. Without any argument, `cd` presents you with the full objects tree. Just use arrows to select the destination path, and enter will get you there. Please try `help cd` for navigation tips. COMMAND SYNTAX ============== Commands are built using the following syntax: [TARGET_PATH] COMMAND_NAME [OPTIONS] TARGET_PATH indicates the path to run the command from. If omitted, the command is run from your current path. OPTIONS depend on the command. Please use `help` to get more information. AVAILABLE COMMANDS ================== The following commands are available in the current path: - bookmarks action [bookmark] - cd [path] - create name dev [readonly] [wwn] - delete name [save] - exit - get [group] [parameter...] - help [topic] - ls [path] [depth] - pwd - refresh - set [group] [parameter=value...] - status /backstores/block> create zfsbladevol1 /dev/zvol/zfs/vol1 Created block storage object zfsbladevol1 using /dev/zvol/zfs/vol1. /backstores/block> exit Global pref auto_save_on_exit=true Last 10 configs saved in /etc/target/backup/. Configuration saved to /etc/target/saveconfig.json Then you can create a LUN and add via the gui. Will look into adding the Device mapping part. 2 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.