Jump to content
  • Unraid OS version 6.8.0-rc4 available


    limetech
    • Closed

    Misc. bug fixes and more changes to try and track down source of 'SQLite DB Corruption' issue.

     

    Specific changes in [-rcN] are indicated in bold below.

     

    New in Unraid OS 6.8 release:

     

    The unRAIDServer.plg file (update OS) still downloads the new release zip file to RAM but then extracts directly to USB flash boot device.  You will probably notice a slight difference in speed of extract messages. [-rc2] The 'sync' command at the end has been replaced with 'sync -f /boot'.

     

    Forms based authentication
    If you have set a root password for your server, upon boot you'll now see a nice login form.  There still is only one user for Unraid so for username enter root.  This form should be compatible with all major password managers out there.  We always recommend using a strong password.  [-rc2] There is no auto-logout implemented yet, please click Logout on menu bar or completely close your browser to logout.

     

    Linux kernel 5.3

    • default scheduler now 'mq-deadline' [-rc2] but this can be changed via Settings/Disk Settings/Scheduler setting.
    • enabled Huge Page support, though no UI control yet
    • binfmt_misc support
    • added "Vega 10 Reset bug" [-rc2] and 'navi-reset' patches
    • [-rc2] added oot: Realtek r8125: version 9.002.02
    • [-rc3] additional md/unraid changes and instrumentation
    • more device drivers

     

    Some out-of-tree (oot) drivers are currently omitted either because the source code doesn't compile or driver doesn't work with the 5.3 kernel:

    • Intel ixgbe [does not build] (using in-tree driver)
    • Highpoint r750 [does not work]
    • Highpoint rr3740a [does not build]

     

    This is always the risk with including vendor-supplied drivers.  Until the vendor fixes their code we must omit their driver.

     

    md/unraid driver
    Introduced "multi-stream" support:

    • Reads on devices which are not being written should run at full speed.  In addition, if you have set the md_write_method tunable to "reconstruct write", then while writing, if any read streams are detected, the write method is switched to "read/modifywrite".
    • Parity sync/check should run at full speed by default.
    • Parity sync/check is throttled back in presence of other active streams.
    • The "stripe pool" resource is automatically shared evenly between all active streams.

     

    As a result got rid of some Tunables:

    • md_sync_window
    • md_sync_thresh

    and added some tunables:

    • md_queue_limit
    • md_sync_limit
    • [-rc2] md_scheduler

     

    Please refer to Settings/Disk Settings help text for description of these settings.

     

    Remaining issue: some users have reported slower parity sync/check rates for very wide arrays (20+ devices) vs. 6.7 and earlier releases - we are still studying this problem.


    WireGuard support - available as a plugin via Community Apps.  Our WireGuard implementation and UI is still a work-in-process; for this reason we have made this available as a plugin, though the latest WireGuard module is included in our Linux kernel.  Full WireGuard implementation will be merged into Unraid OS itself in a future release.  I want to give special thanks to @bonienl who wrote the plugin with lots of guidance from @ljm42 - thank you!  I also should give a shout out to @NAS who got us rolling on this.  If you don't know about WireGuard it's something to look into!

     

    Guide here:


    WS-Discovery support - Finally you can get rid of SMBv1 and get reliable Windows network discovery.  This feature is configured on the Settings/SMB Settings page and enabled by default.

    • Also on same settings page is Enable NetBIOS setting.  This is enabled by default, however if you no longer have need for NetBIOS discovery you can turn it off.  When turned off, Samba is configured to accept only SMBv2 protocol and higher.
    • Added mDNS client support in Unraid OS.  This means, for example, from an Unraid OS terminal session to ping another Unraid OS server on your network you can use (e.g., 'tower'):
      ping tower.local
      instead of
      ping tower
      Note the latter will still work if you have NetBIOS enabled.

     

    User Share File System (shfs) changes:

    • Integrated FUSE-3 - This should increase performance of User Share File System somewhat.
    • Fixed bug with hard link support.  Previously a 'stat' on two directory entries referring to same file would return different i-node numbers, thus making it look like two independent files.  This has been fixed however there is a config setting on Settings/Global Share Settings called "Tunable (support hard links)".  [-rc2 ] Fixed the default value Yes, but with certain very old media and DVD players which access shares via NFS, you may need to set this to No.
    • Note: if you have custom config/extra.cfg file, get rid of it.


    Other improvements/bug fixes:

    • Format - during Format any running parity sync/check is automatically Paused and then resumed upon Format completion.
    • Encryption - an entered passphrase is not saved to any file.  Also included an API for Unassigned devices plugin to open encrypted volumes.
    • Fixed bug where multi-device btrfs pool was leaving metadata set to dup instead of raid1.
    • Several other small bug fixes and improvements.
    • Numerous base package updates [-rc2] including updating PHP to version 7.3.x, Samba to version 4.11.x.

     

    Finally - please note that AFP is now deprecated and we plan to remove in Unraid 6.9 release.

     

    Version 6.8.0-rc4 2019-10-23

    Base distro:

    • aaa_elflibs: version 15.0 build 13
    • at: version 3.2.1
    • btrfs-progs: version 5.3
    • ca-certificates: version 20191018
    • dhcpcd: version 8.1.1
    • docker: version 19.03.4
    • glib2: version 2.62.2
    • kernel-firmware: version 20191022_2b016af
    • lm_sensors: version 3.6.0
    • network-scripts: version 15.0
    • pkgtools: version 15.0
    • samba: version 4.11.1
    • shadow: version 4.7
    • sudo: version 1.8.28p1

    Linux kernel:

    • version 5.3.7
    • oot: md/unraid: version 2.9.11 (use bio_reset(), more tunables)

    Management:

    • samba: if netbios enabled, set 'server min protocol = NT1'
    • webgui: Dashboard: show titles without text-transform
    • webgui: Enable notifications by default
    • webgui: Only create session when user successfully logs in; also enable session.use_strict_mode to prevent session fixation attacks
    • webgui: Dashboard: fix WG direction arrows
    • webgui: Dashboard: adjust column width for themes azure/gray
    • webgui: Fixed popup window in foreground
    • webgui: Expanded help for Use Cache setting

     

    Version 6.8.0-rc3 2019-10-17

    Management:

    • php: set very long session timeout

     

    Version 6.8.0-rc2 2019-10-17

    Base distro:

    • aaa_elflibs: version 15.0 build 15
    • at-spi2-atk: version 2.34.1
    • binutils: version 2.33.1
    • gdk-pixbuf2: version 2.40.0
    • glib2: version 2.62.1
    • harfbuzz: version 2.6.2
    • icu4c: version 65.1
    • kernel-firmware: version 20191008_aa95e90
    • libX11: version 1.6.9
    • librsvg: version 2.46.1
    • libvirt-php: version 20190803
    • openssh: version 8.1p1
    • php: version 7.3.10
    • pkgtools: version 15.0 build 25
    • samba: version 4.11.0 (CVE-2019-10197)
    • sqlite: version 3.30.1
    • ttyd: version 20191001
    • wireguard: version 0.0.20191012
    • xfsprogs: version 5.2.1

    Linux kernel:

    • change schedulers from modules to built-ins
    • patch: navi_reset (user request)
    • oot: Realtek r8125: version 9.002.02

    Management:

    • add 'scheduler' tunable for array devices
    • fix shfs hard link initially reported as enabled but not actually enabled
    • nginx: disable php session expiration
    • unRAIDServer.plg (update OS) now executes 'sync -f /boot' instead of full sync at end of update
    • webgui: Improve Use Cache option
    • webgui: other minor text corrections
    • webgui: Dashboard: add up/down arrows to VPN tunnel traffic

     

    Version 6.8.0-rc1 2019-10-11

    Base distro:

    • aaa_elflibs: version 15.0 build 11
    • acpid: version 2.0.32
    • at-spi2-atk: version 2.34.0
    • at-spi2-core: version 2.34.0
    • atk: version 2.34.1
    • bash: version 5.0.011
    • btrfs-progs: version 5.2.2
    • bzip2: version 1.0.8
    • ca-certificates: version 20190826
    • cifs-utils: version 6.9
    • cryptsetup: version 2.2.1
    • curl: version 7.66.0
    • dbus: version 1.12.16
    • dbus-glib: version 0.110
    • dhcpcd: version 8.0.6
    • docker: version 19.03.3
    • e2fsprogs: version 1.45.4
    • encodings: version 1.0.5
    • etc: version 15.0
    • ethtool: version 5.3
    • expat: version 2.2.9
    • file: version 5.37
    • findutils: version 4.7.0
    • freetype: version 2.10.1
    • fuse3: version 3.6.2
    • gdbm: version 1.18.1
    • gdk-pixbuf2: version 2.38.2
    • git: version 2.23.0
    • glib2: version 2.62.0
    • glibc-solibs: version 2.30
    • glibc-zoneinfo: version 2019c
    • glibc: version 2.30
    • glu: version 9.0.1
    • gnutls: version 3.6.10
    • gtk+3: version 3.24.10
    • harfbuzz: version 2.6.0
    • haveged: version 1.9.8
    • hostname: version 3.22
    • hwloc: version 1.11.13
    • icu4c: version 64.2
    • intel-microcode: version 20190918
    • iproute2: version 5.3.0
    • iptables: version 1.8.3
    • iputils: version 20190709
    • irqbalance: version 1.6.0
    • less: version 551
    • libICE: version 1.0.10
    • libX11: version 1.6.8
    • libXi: version 1.7.10
    • libXt: version 1.2.0
    • libarchive: version 3.4.0
    • libcap-ng: version 0.7.10
    • libcroco: version 0.6.13
    • libdrm: version 2.4.99
    • libedit: version 20190324_3.1
    • libevdev: version 1.7.0
    • libevent: version 2.1.11
    • libgcrypt: version 1.8.5
    • libgudev: version 233
    • libjpeg-turbo: version 2.0.3
    • libnftnl: version 1.1.4
    • libnl3: version 3.5.0
    • libpcap: version 1.9.1
    • libpciaccess: version 0.16
    • libpng: version 1.6.37
    • libpsl: version 0.21.0
    • librsvg: version 2.44.14
    • libseccomp: version 2.4.1
    • libssh2: version 1.9.0
    • libtasn1: version 4.14
    • libusb: version 1.0.23
    • libvirt-php: version 0.5.5
    • libvirt: version 5.7.0 (CVE-2019-10161, CVE-2019-10166, CVE-2019-10167, CVE-2019-10168)
    • libwebp: version 1.0.3
    • libzip: version 1.5.2
    • logrotate: version 3.15.1
    • lsof: version 4.93.2
    • lsscsi: version 0.30
    • lvm2: version 2.03.05
    • lz4: version 1.9.1
    • mkfontscale: version 1.2.1
    • mozilla-firefox: version 68.0.2 (CVE-2019-11751, CVE-2019-11746, CVE-2019-11744, CVE-2019-11742, CVE-2019-11736, CVE-2019-11753, CVE-2019-11752, CVE-2019-9812, CVE-2019-11741, CVE-2019-11743, CVE-2019-11748, CVE-2019-11749, CVE-2019-5849, CVE-2019-11750, CVE-2019-11737, CVE-2019-11738, CVE-2019-11747, CVE-2019-11734, CVE-2019-11735, CVE-2019-11740, CVE-2019-11754, CVE-2019-9811, CVE-2019-11711, CVE-2019-11712, CVE-2019-11713, CVE-2019-11714, CVE-2019-11729, CVE-2019-11715, CVE-2019-11716, CVE-2019-11717, CVE-2019-1 1718, CVE-2019-11719, CVE-2019-11720, CVE-2019-11721, CVE-2019-11730, CVE-2019-11723, CVE-2019-11724, CVE-2019-11725, CVE-2019-11727, CVE-2019-11728, CVE-2019-11710, CVE-2019-11709)
    • nano: version 4.5
    • ncurses: version 6.1_20190720
    • net-tools: version 20181103_0eebece
    • nettle: version 3.5.1
    • nghttp2: version 1.39.2
    • nginx: version 1.16.1 (CVE-2019-9511, CVE-2019-9513, CVE-2019-9516)
    • nodejs: version 10.16.3
    • nss-mdns: version 0.14.1
    • ntp: version 4.2.8p13
    • openldap-client: version 2.4.48
    • openssh: version 8.0p1
    • openssl-solibs: version 1.1.1d
    • openssl: version 1.1.1d
    • p11-kit: version 0.23.18.1
    • pcre2: version 10.33
    • php: version 7.2.23 (CVE-2019-11042, CVE-2019-11041)
    • pixman: version 0.38.4
    • pkgtools: version 15.0
    • procps-ng: version 3.3.15
    • qemu: version 4.1.0 (CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091)
    • qrencode: version 4.0.2
    • rpcbind: version 1.2.5
    • rsyslog: version 8.1908.0
    • samba: version 4.10.8 (CVE-2019-10197)
    • sdparm: version 1.10
    • sessreg: version 1.1.2
    • setxkbmap: version 1.3.2
    • sg3_utils: version 1.44
    • shadow: version 4.7
    • shared-mime-info: version 1.12
    • sqlite: version 3.29.0
    • sysvinit-scripts: version 2.1
    • sysvinit: version 2.96
    • talloc: version 2.3.0
    • tdb: version 1.4.2
    • tevent: version 0.10.1
    • ttyd: version 1.5.2
    • usbutils: version 012
    • util-linux: version 2.34
    • wget: version 1.20.3
    • wireguard: version 0.0.20190913
    • wsdd: version 20180618 build 2
    • xauth: version 1.1
    • xclock: version 1.0.9
    • xfsprogs: version 5.2.1
    • xkeyboard-config: version 2.27
    • xorg-server: version 1.20.5
    • xrandr: version 1.5.1
    • xterm: version 348
    • xwininfo: version 1.1.5
    • zstd: version 1.4.3

    Linux kernel:

    • version 5.3.6
    • default scheduler now mq-deadline
    • CONFIG_BINFMT_MISC: Kernel support for MISC binaries
    • CONFIG_DEBUG_FS: Debug Filesystem
    • CONFIG_HUGETLBFS: HugeTLB file system support
    • CONFIG_ICE: Intel(R) Ethernet Connection E800 Series Support
    • CONFIG_IGC: Intel(R) Ethernet Controller I225-LM/I225-V support
    • CONFIG_MLX5_CORE_IPOIB: Mellanox 5th generation network adapters (connectX series) IPoIB offloads support
    • CONFIG_SCSI_SMARTPQI: Microsemi PQI Driver
    • CONFIG_WIREGUARD: IP: WireGuard secure network tunnel
    • patch: fix_vega_reset (user request)
    • patch: increase BLK_MAX_REQUEST_COUNT from 16 to 32
    • oot: LimeTech md/unraid: version 2.9.10 (multi-stream support)
    • oot: Highpoint rsnvme: version v1.2.16_19_05_06
    • oot: Tehuti tn40xx: version 0.3.6.17.2
    • oot: omitted: Intel ixgbe [does not build] (using in-tree driver)
    • oot: omitted: Highpoint r750 [does not work]
    • oot: omitted: Highpoint rr3740a [does not build]

    Management:

    • fix btrfs bug where converting from single to multiple pool did not balance metadata to raid1, and converting from multiple to single did not balance metadata back to single.
    • auto-mount hugetlbfs to support kernel huge pages
    • emhttpd: do not write /root/keyfile if encryption passphrase provided via webGUI
    • fstab: mount USB flash boot device with root-only access
    • nginx.conf: configure all nginx worker threads to run as 'root'.
    • start/stop WireGuard upon server start/shutdown
    • support forms-based authentication
    • shfs: support FUSE3 API changes; hard links report same st_ino; hard link support configurable
    • support disabling NetBIOS, and set Samba 'min server procotol' and 'min client protocol' to SMB2 if disabled
    • support WS-Discovery method
    • support mDNS local name resolution via avahi
    • extract OS upgrade directly to USB flash
    • webgui: Revamp Banner Warning System
    • webgui: Fix custom case png not surviving reboot
    • webgui: Enhanced display of network settings
    • webgui: Open banner system to 3rd party apps
    • webgui: Modified notify script to allow overriding email recipients in notification settings
    • webgui: Allow Safari to use websockets
    • webgui: Select case correction + replace MD1510 for AVS-10/4
    • webgui: Font, Icon and image cleanup
    • webgui: Added AFP deprecated notice
    • webgui: Changed config folder of TELEGRAM
    • webgui: Add share access to user edit
    • webgui: Added cache and disk type to shares page
    • webgui: Aligned management page layout
    • webgui: Added conditional UPnP setting on Management page
    • webgui: Support wireguard plugin in download.php
    • webgui: Added UPnP to access script (to support WireGuard plugin)
    • webgui: Made notify script compatible with 6.8 new security scheme
    • webgui: Fixed misalignment of absent disk on Main page
    • webgui: Update ArrayDevices.page help text
    • webgui: show warning on login page when browser cookies are disabled
    • webgui: Fixed docker container update state
    • webgui: Added VM XML files to diagnostics
    • webgui: Telegram notification agent: enable group chat IDs, update helper description
    • webgui: Integrate CAs Plugin Helper
    • webgui: Switch download routine to be PHP Curl
    • webgui: Change PluginHelpers download to be PHP Curl
    • webgui: dockerMan - Deprecate TemplateURL
    • webgui: Fixed: footer always on foreground
    • webgui: Plugin Helpers: Follow redirects on downloads
    • webgui: dockerMan: Redownload Icon if URL changes
    • webgui: If a page is loaded via https, prevent it from loading resources via http (ie, block mixed content)
    • webgui: Ensure spinner always ontop
    • webgui: Allow outside click to close popups
    • webgui: Use complete HTML documents in popups
    • webgui: Standardize on lang="en"
    • webgui: Added 'F1' key to toggle help text
    • webgui: Main page: consolidate spin up/down action and device status into one
    • webgui: support changed tunables on Disk Settings page
    • Like 1
    • Thanks 4


    User Feedback

    Recommended Comments



    On 2019/10/26 at PM6点44分, dalben said:

    我的go文件中有几个modeprobe命令。它们仍然可以从那里运行还是应该在其他地方?系统临时插件不适用于rc1和rc 4

     

    #启动传感器
    modprobe coretemp
    modprobe nct6775

    Yes, I do it. But  it still doesn't work. rc 3 also is the same

    Share this comment


    Link to comment
    Share on other sites
    On 10/27/2019 at 1:01 AM, limetech said:

    Something is different.  Maybe a commit beyond the 3.6 release.

    root@Tower:~# sensors-detect
    # sensors-detect revision 6284 (2015-05-31 14:00:33 +0200)

    The sensors-detect revision in 2015. Is there any update?

    Share this comment


    Link to comment
    Share on other sites
    3 minutes ago, Young_Max said:
    
    root@Tower:~# sensors-detect
    # sensors-detect revision 6284 (2015-05-31 14:00:33 +0200)

    The sensors-detect revision in 2015. Is there any update?

    actully you can download the latest one from github, it is just a perl script

    Share this comment


    Link to comment
    Share on other sites
    1 minute ago, trott said:

    actully you can download the latest one from github, it is just a perl script

    So how can I keep unraid using it?

    Share this comment


    Link to comment
    Share on other sites

    there is any way to forward the local ip trough DMZ and access Unraid from the internet or from a domain name. that would be awesome!

    Share this comment


    Link to comment
    Share on other sites
    1 hour ago, Johan1111 said:

    there is any way to forward the local ip trough DMZ and access Unraid from the internet or from a domain name. that would be awesome!

    If you want a safe way of accessing your server from outside, scroll to the top of this page and read the section entitled WireGuard support, then follow the link to the guide.

    Share this comment


    Link to comment
    Share on other sites

    I upgraded two days ago and have had two crashes since.. All OOM ... Parity checks were running at that time and there were references to cache_dirs .. Unfortunately I have not been able to salvage logs..

    Share this comment


    Link to comment
    Share on other sites
    14 hours ago, Young_Max said:

    The sensors-detect revision in 2015. Is there any update?

    We are including the latest version of lm-sensors (3.6) however we don't include perl.  Probably you have a plugin that is installing perl and along with it an old version of lm-sensors.

    Share this comment


    Link to comment
    Share on other sites
    6 hours ago, limetech said:

    Probably you have a plugin that is installing perl and along with it an old version of lm-sensors.

    It looks like the Dynamix System Temperature plugin (current version is dated 2019-01-12) is replacing the stock version of sensors-detect with its own:

    Oct 21 19:32:09 Lapulapu root: Verifying package dynamix.system.temp.txz.
    Oct 21 19:32:09 Lapulapu root: Installing package dynamix.system.temp.txz:
    Oct 21 19:32:09 Lapulapu root: PACKAGE DESCRIPTION:
    Oct 21 19:32:09 Lapulapu root: Package dynamix.system.temp.txz installed.
    Oct 21 19:32:09 Lapulapu root: plugin: skipping: /boot/config/plugins/dynamix.system.temp/sensors-detect already exists
    Oct 21 19:32:09 Lapulapu root: plugin: creating: /usr/sbin/sensors-detect - copying LOCAL file /boot/config/plugins/dynamix.system.temp/sensors-detect
    Oct 21 19:32:09 Lapulapu root: plugin: setting: /usr/sbin/sensors-detect - mode to 0755
    Oct 21 19:32:09 Lapulapu root: plugin: running: anonymous
    Oct 21 19:32:09 Lapulapu kernel: it87: Found IT8603E chip at 0x290, revision 1

    I'll try safe mode.

     

    EDIT: Without the plugin I see a different output from sensors-detect

    root@Lapulapu:~# sensors-detect 
    # sensors-detect revision $Revision$

     

    Edited by John_M
    Safe mode

    Share this comment


    Link to comment
    Share on other sites

    Anybody try creating a new Windows 10 VM under RC4? I had a DEVIL of a time trying to get it to work. The install would copy the files, go all the way to the "Finishing up" and then display any one of several errors - corrupted media, cannot set local, could not load a driver, could not continue, or just jump right back to the setup button at the start.

     

    Rolled back to 6.7.2 and poof - installation went like a champ though I did have to edit/save because using the RC4 built XML gave an invalid machine type error.

    Edited by jbartlett

    Share this comment


    Link to comment
    Share on other sites
    9 hours ago, John_M said:

    It looks like the Dynamix System Temperature plugin

    Alle versions of Unraid did not include sensors-detect. I'll need to make the installation of this conditional in the plugin.

    • Thanks 1

    Share this comment


    Link to comment
    Share on other sites

    After upgrading to the new RC4 and doing a stop and start of the array I get this:

    image.png.e7cc60df43506c8814c8565078eb0bec.png

     

    After a stop it asks for a new key?

     

    Diag file:

    plexzone-diagnostics-20191029-1016.zip

     

    UPDATE: Did a reboot and it came back asking for the key and I could start.....haven't seen that before :-)

    Edited by casperse

    Share this comment


    Link to comment
    Share on other sites

    Just tried to reproduce this, and if I stop the array I get the new key error again....

    So right now I have to do a reboot if I want to stop the array

    But after a full reboot again I get the normal write Key and start Array

    Share this comment


    Link to comment
    Share on other sites
    3 hours ago, jbartlett said:

    Anybody try creating a new Windows 10 VM under RC4? I had a DEVIL of a time trying to get it to work. The install would copy the files, go all the way to the "Finishing up" and then display any one of several errors - corrupted media, cannot set local, could not load a driver, could not continue, or just jump right back to the setup button at the start.

     

    Rolled back to 6.7.2 and poof - installation went like a champ though I did have to edit/save because using the RC4 built XML gave an invalid machine type error.

    What vdisk type did you choose? RAW or qcow?

    Share this comment


    Link to comment
    Share on other sites
    5 hours ago, casperse said:

    After upgrading to the new RC4 and doing a stop and start of the array I get this:

    Thank you for posting your diags - I see the bug.  A workaround for you would be to change 'Settings/Disk Settings/Default file system' from 'xfs-encrypted' to 'xfs'.  Let me know if that works.

    Share this comment


    Link to comment
    Share on other sites
    4 hours ago, jonathanm said:

    What vdisk type did you choose? RAW or qcow?

    qcow2. It seems that the root issue is installing a qcow file on a XFS formatted drive (a SSD mounted by UD). Raw worked fine. qcow on BTRFS (reformatted the SSD) also worked fine.

     

    Share this comment


    Link to comment
    Share on other sites
    On 10/28/2019 at 6:16 PM, Helmonder said:

    I upgraded two days ago and have had two crashes since.. All OOM ... Parity checks were running at that time and there were references to cache_dirs .. Unfortunately I have not been able to salvage logs..

    System just crashed again.. No webgui, no telnet.. This time no parity check was running.

     

    See attached for a screenprint of my IPMI .. 

     

     

    Capture.JPG

     

    Since I have IPMI I was able to access the console and have been able to write my syslog to /boot.. It is attached here.

     

    I am seeing (I think) a lot of out of memory type errors. 

     

    I am now reverting to the previous release.

     

     

     

    syslog.zip

    Edited by Helmonder

    Share this comment


    Link to comment
    Share on other sites

    Just had a kernel panic on rc4 while formatting four new drives to XFS just after starting the array.

    All I've managed to get on it was the attached screencap from the console as traceback was running by.

    iKVM_capture.jpg

    Share this comment


    Link to comment
    Share on other sites
    1 hour ago, Helmonder said:

    System just crashed again.. No webgui, no telnet.. This time no parity check was running.

     

    See attached for a screenprint of my IPMI .. 

     

     

    Capture.JPG

     

    Since I have IPMI I was able to access the console and have been able to write my syslog to /boot.. It is attached here.

     

    I am seeing (I think) a lot of out of memory type errors. 

     

    I am now reverting to the previous release.

     

     

     

    syslog.zip 2.15 MB · 0 downloads

     

    I suggest safe-mode boot, or at least prune back the plugins - I see one of them installing an old version of openssl and that's not good.

     

    Share this comment


    Link to comment
    Share on other sites

    Taking one for the team - reinstalled RC4 to capture a diagnostics log while my wife is otherwise occupied :).

     

    Same issue, downloading multiple streams to the array and trying to play-back a UHD video file and getting timeouts in any file operations approx every 10-15 seconds.

     

    Now back to 6.7.2 because I need stability in my marriage!

     

    diagnostics-20191030-0400.zip

    Share this comment


    Link to comment
    Share on other sites
    2 hours ago, dgriff said:

    Same issue, downloading multiple streams to the array and trying to play-back a UHD video file and getting timeouts in any file operations approx every 10-15 seconds.

    When get a chance please describe in more detail what operations are in progress and where are the timeouts appearing.

    Share this comment


    Link to comment
    Share on other sites
    20 hours ago, Helmonder said:

    System just crashed again.. No webgui, no telnet.. This time no parity check was running.

    Same here; twice this week. The UI wouldn't respond, nor would ping. I could login locally and saw dhcpd pegged at 100%, but didn't grab the syslog before rebooting. When this happens again I'll copy and post.

    Any other diagnostics I can try or provide?

    Share this comment


    Link to comment
    Share on other sites

    If you are running 6.7.2 (or later) you might want to enable the syslog server under Settings to capture the log to a persistent location so it survives a reboot.

    Share this comment


    Link to comment
    Share on other sites

    Is it possible to connect Wireguard just to Custom Bro, or does the whole server have to use WireGuard?

    Share this comment


    Link to comment
    Share on other sites



    Guest
    This is now closed for further comments

  • Status Definitions

     

    Open = Under consideration.

     

    Solved = The issue has been resolved.

     

    Solved version = The issue has been resolved in the indicated release version.

     

    Closed = Feedback or opinion better posted on our forum for discussion. Also for reports we cannot reproduce or need more information. In this case just add a comment and we will review it again.

     

    Retest = Please retest in latest release.


    Priority Definitions

     

    Minor = Something not working correctly.

     

    Urgent = Server crash, data loss, or other showstopper.

     

    Annoyance = Doesn't affect functionality but should be fixed.

     

    Other = Announcement or other non-issue.