RiDDiX

Sorry for bringing up this old thread. But this is yeah literally the same issue what I got after switching from 6.9.X to 6.10-rc1 Just one thing got changed... I change my old GT630 to a GT1030 (new Version). Even when I change my gpu again this seems to occur again, it doenst matter. I fixed and looked up all the mentioned settings from the FAQ but yeah it wont resolve my problems. As mentioned I get the same freezes like c1c3r0... Over a year ago. Asrock X570 Phantom Gaming 4S AMD Ryzen 9 3900x 64GB RAM DDR4-3200 MhZ ECC Nvidia GT 1030 bunch of parity drives and a bunch of array drives. Windows 10 VM got passthrough GT1030 and 12 Cores.... Even within the logs nothing seems to report a error or a failure or something badly behaving.

Just a quick question here. Someone already tried OpenCore 0.7.3 or 0.7.4? If I try both I just get stuck while booting where it says: Aquantia Patch Failed - Failed 0 I really dont know why this just happens with OpenCore 0.7.3 and 0.7.4 with 0.7.2 and lower I wont see that error in anyway

You are right.. I cant ping my unraid server... Any clue? I dont know how, but it fixed itself, after I restarted the whole unRAID

Hello, first off all. Thank you for these nice plugins. Nearly all of them are working for me except the Adguard Exporter, I entered all informations the right way but when I start it, it instantly stops. I dont know why logs dont show any errors. I use my adguard home on unraid with its own IP-Adress. Docker allow host is enabled and so on. I cant figure out why this wont work.

Do you also experience some laggs within a few seconds? It seems fluid but nearly every 5 seconds its get laggy, but immideatly back to normal, then again a short lagg and back to normal XD Maybe I revert back to Big Sur

I got my Big Sur just updated fine to Monterey. Just it feels a lil bit laggy.. OK Beta And yes Bluetooth doenst work atm. Which maybe is a dealbraker for someone (it will include me if this doenst get fixed in a few weeks/days)

I have also bad performance problems but these occurs just when I access shares on the unraid and move files from unraid to unraid and so on. Then my Win 10 VM gets unusable slow till the transfers are finished. My VM got 12 Cores, 16GB RAM, Passedthrough SSD (its own SSD not a VDISK), Passedthrough RX580. My problems just are noticable when accessing files on unraid, like opening a archiv file, moving or copying files within unraid or from my VM to a unraid share... Even while downloading directly with Firefox within my VM it gets slow asf... (Sorry but its laggy and unsuable till downloads/file accessing/moving/copying is finished). With my MacOS VM also 12 Cores, 16GB RAM, Passedthrough SSD (its own SSD not a VDISK), Passedthrough RX580... Everyhing there works "normally"... When I use my gaming PC to access unraid and move or copy files everything is fine and useable even on the VM, also my problem just occurs when use my Win 10 VM and I do something on the unraid shares and or do some downloads within my VM....

Sometimes it is better to use the "original" delivered software Its still sad, that the linuxserver.io version of plex-docker dont work. But I usually also try to use the "official" version. Most of the time less pain. Maybe this will be fixed with an updated docker-image.

Hackintosh stuff is always related to hardware and apples decisions. Sometimes it works "out-of-the-box" sometimes it is needed to investigate. As far for me I had also some trouble at the beginning because it was my first Hackintosh VM with passthrough hardware. After some research and help here in the forum I got everything working and my expertise is to never give up. It is always hard to help, when just shorts informations are given. Most of the problems depents of settings within the xml file itself. Correct mount-points, correct hardware ids and so on.

This seems to be a interessting topic 🙂 I use my Unraid Server heavily for VMs, Big Sur 11.3.1 heavily for graphic design and video edition (passedthrough RX 580, 8 Cores and 16GB of RAM), Windows 10 for normal Workflows like maintaining my works Servers (RDP) and sorting my Unraid Server shares (passedthrough GT630, 4Cores, 8GB RAM). And a ton of Dockers, AdGuard Home, AdGuard Home Sync (for my Pi as Backup), JDownloader, Plex, Krusader, putty, Confluence (Atlassian), mysql-servers, MKVToolNix, Handbrake, Firefox (normal Browsing), Firefox-Facebook (just for Facebook, Instagram...), Firefox-Sync-Server, sabnzbd, heimdall and thunderbird. It seems to be alot and yes it maybe is but I like the fact using my already configured machine for such things. Around my wattage usage is 140-180 Watts. I will in the near future just use SSDs instead of normal HDDs because faster and silent. For Backups I'll use my HDDs then in my Synology-NAS. My Synology just now bring me my DDNS for my Unraid stuff. It works a lot nicer then duckddns and all others because I like the Synology UI for setting up reverse proxies and it is build in why not use it. Yeah also a lot, but more efficant then my normal Workstation with an i9-9900K and a RTX 2080Ti (around 200-450Watts nearly at idle yes no coreparking and all energy saving things are turned off, because I want to game and it should always be fluid as possible while gaming...). I already switched most of my workflows to my Unraid VMs and use my "workstation" sometimes just for gaming purposes. (Cuz many games kick or and will ban you if you use VMs as Gaming-Stations "sad"). My energy-provider loves me because I pay them a lot but what I can do for my private and selfhosted life I do. Also I like the fact to be free as possible when it goes to hosted things like "cloud-storage, Sync-Servers and so on....".

I already did some bad things to my macos vm. A few sites before you can ready my problems. I solved them with some great help here. After I fixed my first macos I tried just to do the same but with clear configs (this means I just set up my macinabox config and created my VMs. After creation I renamed them and created directly another one. I always just edited the xml file directly (advanced view within the VM settings). Because you just need macinabox for starting downloading the bigsur-install-media and setting up the bigsur-opencore.img. You could also just use one created xml file and add a new vm and just paste the xml file content to the new VM. Keep in mind to adjust the vdisk / hdd path and the name and UUID. I got so already two working VMs and one in the pipeline for dirty testings Sorry forgot to mention that I use Unraid 6.9.2

I dont know if this is correct but it seems you are missing a lot of ports for plex. 3005, 32410, 32410, 32412, 32413, 32414, 32469, 8324 and the udp port (1900). I never did this with swag as "proxy". Also I am using the plexinc/pms-docker (but linuxserver.io should work the same way). I just use OpenVPN Server to connect from everywhere directly into my lan network and then stream from everywhere. XD without Plex-Pass.

Fresh Installations should work fine. I added already two new Big Sur 11.3.1 without any problems. Maybe I am just lucky? I already own a MacBook Air 2018 and I like the fact of working with both simutainusly. I Love Unraid and Spaceinvaderone for this script/app. Hackintosh-Systems are often just pain in the a**, but with Unraid everything seems so clean ❤️

Thats bad. Maybe you could provide me the XML file of your VM? I updated now two times my Mac Big Sur VM without any problems. My first problem was a bad OpenCore config (my fault)

Ups Here you go. Macinabox_CODE-pure-efi.fd Macinabox_VARS-pure-efi.fd

You should just try to recreate your Macinabox. This means. Delete both created userscripts, then remove the Docker-App and then remove the "app" macinabox. Now go into the Community-Apps and reinstall the Macinabox app with your settings.

Here you go! https://easyupload.io/zyte8s

You should be able to update if you use the "Big-Sur-OpenCore.img" provided by macinabox (which you maybe have removed like me because you want to use your "boot drive (efi)". If you use the clear BigSurOpenCore.img which macinabox provide in /mnt/users/isos then you should be able to update. But maybe some devices wont work while you update it. After the update you should be able to use your own OpenCore again. I tested this within a cloned version of my bigsur without editing again my OpenCore. ^^ https://easyupload.io/zyte8s Here I uploaded the standard BigSur-opencore.img Your xml should then be looks like this: <disk type='block' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source dev='/dev/nvme0n1'/> <--- SHOULD BE EDITED WITH YOUR HDD IF PASSTHROUG! ---> <backingStore/> <target dev='hda' bus='sata'/> <boot order='5'/> <--- Your Boot-Order needed to be changed! ---> <address type='drive' controller='0' bus='0' target='0' unit='2'/> </disk> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/user/isos/BigSur-opencore.img'/> <--- PATH TO YOUR BigSur-opencore.img FILE! ---> <target dev='hdb' bus='sata'/> <boot order='1'/> <--- Your Boot-Order needed to be changed set this while you want to update to "1" ---> <address type='drive' controller='0' bus='0' target='0' unit='3'/> </disk>

Nah, you dont messed up your server. You should just enable "expert view" within editing the VM and empty your xml completely. Than you should be able to remove your VM (without the vdisk!). The vdisk can you manually remove within the domains folder on your server. I fixed my problem myself. I got a bad OpenCore Config.plist. I just redid my OpenCore and then I was able to update just fine from Big Sur 11.2.3 to 11.3.

Does anyone managed to update Big Sur 11.2* to Big Sur 11.3? For me it seems to install but after I booted back into mac os (after 15-20 Minutes update installation) it want again to update xD

I got this problem a few days back ago too. I justed removed the "app" Macinabox and deleted all userscripts (macinabox) and reinstalled the app within community apps. After this I was able to get which OSX I wanted. Maybe this helps?

Maybe try restarting the VM? Because VNC always works for me, when I cracked up my xml file and need to edit it back to get a working gpu-passthrough When the keyboard works normally, than maybe something is wrong within your browser settings (inside the VNC window). What OS you are browsing to your unraid.

Maybe this is wrong here. But I have to say thank you for this great Plugin, because this helped me alot to get my drives sorted for me. 🙂 Thanks!

Thank you so much! It now works sound over hdmi to my display. I updated all kext files and also tried it with alcid=1 and alcid=11 (not both at once). But still I cant get my onboard sound passthroughed Maybe I'll look into this later. Thank you for your great help with my HDMI Sound. Appriciate it!

Maybe but as I wrote here I am at the office (work) and connected via VPN to my Home-Network. Connection seems to be stable. Anyway maybe there hang something up I really dont know. But I am happy that it work again. Thank you for your effort 🙂