Jump to content

JorgeB

Moderators
 View Profile  See their activity

  • Posts

    67,600

  • Joined

  • Last visited

  • Days Won

    707

 Content Type 

Everything posted by JorgeB

  1. JorgeB
    That suggests the VM isn't shutting down, you can try setting the VM to hibernate instead.
  2. JorgeB
    Disks shouldn't corrupt data when there are those type of errors, but if there's something wrong with that disk it's a possibility.
  3. JorgeB
    You should be able to restore the plugins from the the backup, restore only the ones you need.
  4. JorgeB
    https://lime-technology.com/forums/topic/72837-error-log-filled-to-100-in-1day-47min-with-this/?do=findComment&comment=669775
  5. JorgeB
    shfs crashed, reboot and post new diags after array start.
  6. JorgeB
    Cache filesystem is corrupt: Mar 21 21:09:13 UNRAID kernel: REISERFS error (device sdh1): vs-5150 search_by_key: invalid format found in block 18130149. Fsck? Mar 21 21:09:13 UNRAID kernel: REISERFS (device sdh1): Remounting filesystem read-only You need to run a filesystem check or better yet take to opportunity to convert o XFS, reiserfs is not recommended.
  7. JorgeB
    You can, you'd need to do a new config, but for parity to still be 100% in sync with the old disk the rebuild would need to be done in maintenance mode.
  8. JorgeB
    You should start the array now even without parity just to confirm your data is still there.
  9. JorgeB
    Yes Not seeing the reason why, please reboot and post new diags after array start (there shouldn't be one but if there is a "all data on this device will be delete" in front to the cache pool device(s) don't start the array).
  10. JorgeB
    Settings -> Global Share Settings -> Enable user shares
  11. JorgeB
    Try this and then post that log after a crash.
  12. JorgeB
    Only option is a data recovery tool, a few users have used UFS explorer with some success.
  13. JorgeB
    You should first try to find out why it got disable, or post the diagnostics, but if you just want to re-enable: -stop array -unassign parity -start array -stop array -re-assign parity -start array
  14. JorgeB
    They should be in there somewhere, if you can't find it and it still crashes try disabling C-states.
  15. JorgeB
    Unlikely to be an Unraid issue, try swapping just the controllers around, and see where the issue follows.
  16. JorgeB
    Downloaded during a parity check please.
  17. JorgeB
    It's not mencioned in the fixes, but please let us know.
  18. JorgeB
    Then you were probably booting in GUI mode, you can do that but can also still access the webGUI over the network using a PC or even phone.
  19. JorgeB
    SMART test failures can't be cable related.
  20. JorgeB
  21. JorgeB
    That is the correct driver, still need to check it's in IT mode and using latest firmware, you can see that on the syslog, or post it here. You'll need to re-assign all the disks to their original positions.
  22. JorgeB
    Most likely some issue with the Realtek driver, it's not the first time, you'll need to wait for an update, LT usually uses the latest driver available.
  23. JorgeB
    Mover is very inefficient when dealing with those, next time I suggest using the console or a tool like midnight commander.
  24. JorgeB
    Changed Status to Closed Changed Priority to Other
  25. JorgeB
    Yep, Unraid doesn't report board/CPU temps, please re-post in the appropriate plugin support thread.
×
×
  • Create New...