bobbintb

You can export and import your Sonarr settings.

I don't know what you mean by reinstall. The XML is just a settings file. If the hard drive (virtual or physical) is still in the place the XML says it is it should be fine.

I'd just copy and paste it into the 'edit XML' page of the VM.

I have a few questions, one more of a general docker question and one more of a general rtorrent question. It may be kind of convoluted so bear with me. What I am trying to do is write a custom processing script for Sonar that will send commands to rtorrent via the xmlrpc. To do anything with rtorrent though, you need the torrent hash. Unfortunately, rtorrent has 1,115 calls for xmlrpc and very few of them are documented and they don't have any support forum. My research has yielded little. Anyone got any ideas on how to go about using the xmlrpc to get a hash of a specific torrent? I've been playing around with a few of the and I will likely have to use a combination of logic and multiple calls. The other question I have is that to use xmlrpc in the Sonarr docker, I had to install it using apt-get but I'm not sure if it will stay installed when the Sonarr docker image is updated. I'm not sure how that part of docker works. Is that part of the base docker image and thus stay intact when the Sonarr docker updates? Does that mean the base image is shared by other dockers and so installing it in the base image make it available to other docker apps?

You'll have to post your settings.

The M:\ isn't anything to worry about. That's always there.

I'm not sure if the issue is with UD or something else but I precleared a disk in UD with 3 passses with no errors. I formatted it in ext4 and copied data over. I used a powered USB enclosure to connect it to a raspberry pi but I cannot mount it in the pi, even after adding "max_usb_current=1" to the config as recommended. I ran dmesg and got something like "Magic Mismatch Can't find valid F2FS filesystem". gparted shows only 500+gb of unallocated space but it's a 5tb drive. I plug it into a Windows machine and the device manager sees it but it's ext4 so can't mount it. I tried to mount it with http://www.paragon-drivers.com/extfs-windows/ but it gets "unknown error". I put it back in unRAID in UD and it mount fine and all my files are there. Any idea what might be the issue? I thought maybe UD formatted it weird. After I formatted it in UD I went to copy data to it and there was a lost+found folder and I thought those only showed up when there was orphaned data or something.

Cool, thanks for checking.

Can someone tell me is this program supports file name encryption?

Does this work with Google Drive? The website says it does but maybe it's a different version because I don't see it. Just Google Cloud. Edit: I guess the Linux version has fewer supported cloud providers.

The first 72 hours they were in a Windows box running a similar disk check program. It's a crappy box so I think it appears to have reboot at some point. I did some test copies and in unraid and the disk kept unmounting. Then I ran the pre-clear. I though there might be a problem but I was hoping I misinterpreted the report or something and it meant it had 232 sectors available to reallocate or something. I'll look into returning it. I've had it for a few weeks though. This was the first chance I got to do anything with it.

I don't read SMART reports very often. I just did a pre-clear and here is the report: ############################################################################################################################ # # # unRAID Server Preclear of disk 272BK5OOF57D # # Cycle 3 of 3, partition start on sector 64. # # # # # # Step 1 of 5 - Pre-read verification: [8:24:16 @ 165 MB/s] SUCCESS # # Step 2 of 5 - Zeroing the disk: [8:39:22 @ 160 MB/s] SUCCESS # # Step 3 of 5 - Writing unRAID's Preclear signature: SUCCESS # # Step 4 of 5 - Verifying unRAID's Preclear signature: SUCCESS # # Step 5 of 5 - Post-Read verification: [8:25:34 @ 164 MB/s] SUCCESS # # # # # # # # # # # # # # # ############################################################################################################################ # Cycle elapsed time: 25:29:21 | Total elapsed time: 75:44:28 # ############################################################################################################################ ############################################################################################################################ # # # S.M.A.R.T. Status default # # # # # # ATTRIBUTE INITIAL CYCLE 1 CYCLE 2 CYCLE 3 STATUS # # 5-Reallocated_Sector_Ct 232 232 232 232 - # # 9-Power_On_Hours 72 97 122 147 Up 75 # # 194-Temperature_Celsius 30 35 36 35 Up 5 # # 196-Reallocated_Event_Count 28 28 28 28 - # # 197-Current_Pending_Sector 0 0 0 0 - # # 198-Offline_Uncorrectable 0 0 0 0 - # # 199-UDMA_CRC_Error_Count 0 0 0 0 - # # # # # # # # # # # ############################################################################################################################ # SMART overall-health self-assessment test result: PASSED # ############################################################################################################################ --> ATTENTION: Please take a look into the SMART report above for drive health issues. --> RESULT: Preclear Finished Successfully!. root@Tower:/usr/local/emhttp# Should I be worried about the re-allocated sectors? It looks concerning but it passed so I wasn't sure.

Thanks, I thought I checked before but I guess I didn't look back far enough. I'm getting a bunch of write errors. I guess I should run pre-clear a few more times. Might have a DOA.

I'm having an issue where my drive keep unmounting. I attached a drive so that I can copy data from the server but when I check on it it cannot write to the device and it had been unmounted. I don't see anything in the logs indicating it was unmounted. /dev/sdc: re-reading partition table May 09 12:02:49 Creating a 'gpt' partition table on disk '/dev/sdc'. May 09 12:02:49 Creating a primary partition on disk '/dev/sdc'. May 09 12:02:49 Formatting disk '/dev/sdc' with 'ext4' filesystem. May 09 12:02:50 Disk with serial 'TOSHIBA_HDWE150_272BK5OOF57D' is not set to auto mount and will not be mounted... May 09 12:25:38 Format disk '/dev/sdc' with 'ext4' filesystem result: Creating filesystem with 1220942336 4k blocks and 152621056 inodes Filesystem UUID: 87a2afe6-4be3-4da1-bcbf-5fbd006a09d3 Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 102400000, 214990848, 512000000, 550731776, 644972544 Allocating group tables: 0/3done Writing inode tables: 0/3done Creating journal (262144 blocks): done Writing superblocks and filesystem accounting information: 0/3done May 09 12:25:41 Reloading disk '/dev/sdc' partition table. May 09 12:25:42 Reload partition table result: /dev/sdc: re-reading partition table May 09 12:25:42 Disk with serial 'TOSHIBA_HDWE150_272BK5OOF57D' is not set to auto mount and will not be mounted... May 09 12:35:19 Adding disk '/dev/sdc1'... May 09 12:35:19 Mount drive command: /sbin/mount -t ext4 -o auto,noatime,nodiratime,async,nodev,nosuid '/dev/sdc1' '/mnt/disks/TOSHIBA_HDWE150_272BK5OOF57D' May 09 12:35:20 Successfully mounted '/dev/sdc1' on '/mnt/disks/TOSHIBA_HDWE150_272BK5OOF57D'. May 09 12:35:20 Partition 'TOSHIBA HDWE150 272BK5OOF57D' is not set as sharable and will not be shared... May 09 12:35:20 Device '/dev/sdc1' script file not found. 'ADD' script not executed. May 09 15:27:35 Disk with serial 'TOSHIBA_HDWE150_272BK5OOF57D' is not set to auto mount and will not be mounted... May 09 16:29:47 Adding disk '/dev/sdp1'... May 09 16:29:47 Mount drive command: /sbin/mount -t ext4 -o auto,noatime,nodiratime,async,nodev,nosuid '/dev/sdp1' '/mnt/disks/TOSHIBA_HDWE150_272BK5OOF57D' May 09 16:29:57 Successfully mounted '/dev/sdp1' on '/mnt/disks/TOSHIBA_HDWE150_272BK5OOF57D'. May 09 16:29:57 Partition 'TOSHIBA HDWE150 272BK5OOF57D' is not set as sharable and will not be shared... May 09 16:29:57 Device '/dev/sdp1' script file not found. 'ADD' script not executed. May 09 17:58:13 Disk with serial 'TOSHIBA_HDWE150_272BK5OOF57D' is not set to auto mount and will not be mounted... May 09 19:44:22 Adding disk '/dev/sdq1'... May 09 19:44:22 Mount drive command: /sbin/mount -t ext4 -o auto,noatime,nodiratime,async,nodev,nosuid '/dev/sdq1' '/mnt/disks/TOSHIBA_HDWE150_272BK5OOF57D' May 09 19:44:34 Successfully mounted '/dev/sdq1' on '/mnt/disks/TOSHIBA_HDWE150_272BK5OOF57D'. May 09 19:44:34 Partition 'TOSHIBA HDWE150 272BK5OOF57D' is not set as sharable and will not be shared... May 09 19:44:34 Device '/dev/sdq1' script file not found. 'ADD' script not executed.

https://forums.sonarr.tv/t/plex-media-server-refresh-tv-series-only-vs-full-library-update/3454/3

Isn't there already an option in Sonarr for that without needing a custom script? Alternatively, Plex can be set up to scan the folder when it detects a change in the folder. You're trying to run a Docker from within a Docker?

This is the part that I would focus on. [v2.0.0.4689] NzbDrone.Core.Datastore.CorruptDatabaseException: Database file: /config/nzbdrone.db is corrupt, restore from backup if available. See: https://github.com/Sonarr/Sonarr/wiki/FAQ#i-am-getting-an-error-database-disk-image-is-malformed ---> System.Data.SQLite.SQLiteException: disk I/O error

Ah, ok. It's been a while since I set it up so I didn't remember it was random by default. I might be wrong but I think you'd have to specify a port, since Docker needs to map ports from guest to host. I don't recall seeing anyway for it to automatically determine the port. Someone correct me if I'm wrong.

You mean changing it to use a random port?

Was the typo the problem then? I'm still not sure why you think you need the CopyComplete plugin. If you want to manually download the torrent file and place it in the watch folder and have Sonarr process it after download, CopyComplete shouldn't be needed as far as I can tell. I'm sure the same is true for Couch Potato. Here is what I think you need to do: 1. Set your AutoAdd plugin with your watch folders and labels. 2. Set your label plugin to move labels to where you want them after download That should be it. Sonarr already copies the download on it's own so you don't need CopyComplete to do it, unless I'm missing something. No problem.

Right, but you still need them to process completed torrents that are manually added, right? If I understand you correctly, you just need watched folders and labeling set up then. You shouldn't need the CopyCompleted plugin. Well, the AutoAdd plugin does work in the WebUI, as you've found out: http://dev.deluge-torrent.org/wiki/Plugins So you'll have to manually change the config file, which it seems you tried already. But it looks like you've got a typo on line 76 of your autoadd.conf file. It's missing a double-quote around the download location. That's probably the issue.

I'm not clear on what the issue is. You want Sonarr and Couch Potato to copy the files after the torrent downloads so it will keep seeding? It already does that without any special configuration required.

I can't help you with the other but as far as this goes you shouldn't have to do anything or use a plugin at all. This is the default behavior of Sonarr and, I believe, Couch Potato.

It looks like it's still looking in the wrong place. What are your directory settings for your dockers and download client?

Sweet! Thanks!