DayspringGaming

All of a sudden getting an internal server error, and the error log shows the following when trying to log in via the webUI: I haven't made any networking changes or anything - ran the updater tonight without issue, still having this error.

I'm getting the same error as well. So now all of those specific containers that use it are broken.

Same here. Just added an ASUS 10g card. It does SEE the card, but there's no "interface rules" section on the network settings page to swap it to ETH0. Media_Server-diagnostics-20220524-0136.zip

What would cause a file to fail transcoding? I had it run through a library of linux ISOs, and have about 5000 or so that just won't transcode via NVENC. (A large amount worked correctly, though.) And most new files are failing as well. Ideas?

Just replaced my GPU and am getting 1/3 or so of the performance I had before. Tried removing the TDARR node setup and reinstalling. But sitting at 30 FPS on processing. Used to get 100+ or more with my older gpu. Old GPU: TitanXp New GPU: 3080 FE I checked the logs and am seeing the following error: [HPM] Error occurred while trying to proxy request /socket.io/?EIO=4&transport=polling&t=Nq_Iyn7&sid=hebFTjgL85ANwTZjAAAC from 192.168.1.35:8265 to http://192.168.1.35:8266 (ECONNRESET) (https://nodejs.org/api/errors.html#errors_common_system_errors) [HPM] Error occurred while trying to proxy request /socket.io/?EIO=4&transport=polling&t=Nq_IzGR&sid=9nczrJjdDz0tA5VBAAAA from 192.168.1.35:8265 to http://192.168.1.35:8266 (ECONNRESET) (https://nodejs.org/api/errors.html#errors_common_system_errors)

Just installed this docker as the other Handbrake docker went the way of the dodo. I've passed through the NVidia unRAID parameters - but not seeing the NVENC choice within the UI. Is this not a thing with this image?

After a full deletion of the app-data folder for Handbrake, I've re-downloaded it but am getting a server disconnected: code 1006 error and red X on the web ui. Any ideas? The log is showing several of these as I try and log in: 13/04/2021 00:11:40 Got connection from client 192.168.1.164 13/04/2021 00:11:40 other clients: 13/04/2021 00:11:40 Got 'ws' WebSockets handshake 13/04/2021 00:11:40 webSocketsHandshake: incomplete client handshake 13/04/2021 00:11:40 Client 192.168.1.164 gone

So apparently there's a "hack" to allow consumer card virtualization. It sounds like SR IOV. https://www.tomshardware.com/news/nvidia-gpu-virtualization-unlocked-on-client-gpus Am I correct here?

Updated without issue so far.

Name shortening works perfectly! Thanks for fixing!

Just updated to the new version - still having an issue with the long GPU name.

Done and done. And yeah - totally a 1% problem to have. It's just such a pretty card though...

So 1 small nag (maybe a feature request) and an actual enhancement request: Transcoding using handbrake NVENC, but the icon not showing in the UI. From an at-a-glance standpoint, would be nice to have that included. The other "issue" I have is my GPU name is stupid long "Nvidia TITAN Xp COLLECTORS EDITION" - is there a way to make that editable so the characters don't overwrite/overlap each other? GPU_Stats.txt SMI_Log.txt

Getting the following in the logs after the latest update: [v3.0.5.1144] System.ArgumentNullException: Value cannot be null. Parameter name: attribute at System.Xml.Linq.XAttribute.op_Explicit (System.Xml.Linq.XAttribute attribute) [0x0000e] in /build/mono/src/mono/external/corefx/src/System.Private.Xml.Linq/src/System/Xml/Linq/XAttribute.cs:357 2021-03-10 11:28:55,417 DEBG 'sonarr' stdout output: at NzbDrone.Core.Indexers.RssParser+<>c__DisplayClass45_0.<GetEnclosures>b__0 (System.Xml.Linq.XElement v) [0x00000] in M:\BuildAgent\work\63739567f01dbcc2\src\NzbDrone.Core\Indexers\RssParser.cs:260 It runs, but this shows up in the logs several times after startup.

5451 drwx------ 3 root root 16384 Jan 15 2020 ./ 3509 drwx------ 5 root root 16384 May 12 2018 ../ 5454 drwx------ 2 root root 16384 Dec 22 03:00 limetech/

4217 drwx------ 2 root root 16384 Feb 22 22:59 ./ 3509 drwx------ 5 root root 16384 May 12 2018 ../ 5445 -rw------- 1 root root 3576 Mar 15 2020 my-Boinc.xml 4583 -rw------- 1 root root 2857 Nov 6 2019 my-DiskSpeed.xml 5432 -rw------- 1 root root 6884 Mar 29 2020 my-Dropbox.xml 4607 -rw------- 1 root root 5603 Mar 20 2020 my-FoldingAtHome.xml 5439 -rw------- 1 root root 2666 Aug 1 2019 my-Grafana.xml 5433 -rw------- 1 root root 17870 Apr 13 2020 my-HandBrake.xml 4322 -rw------- 1 root root 16369 Apr 17 2020 my-HandBrake_NVENC.xml 5437 -rw------- 1 root root 2272 Aug 1 2019 my-Influxdb.xml 4630 -rw------- 1 root root 13169 Dec 9 01:00 my-MacinaBox.xml 5434 -rw------- 1 root root 15635 Oct 4 2018 my-MakeMKV.xml 5449 -rw------- 1 root root 8166 Sep 26 18:53 my-MinecraftBasicServer.xml 5443 -rw------- 1 root root 3110 Dec 9 2019 my-Netdata.xml 5436 -rw------- 1 root root 581 Apr 28 2019 my-Phantombot.xml 5431 -rw------- 1 root root 2611 Jun 30 2019 my-PlexMediaServer.xml 4477 -rw------- 1 root root 4192 Mar 21 2020 my-PlexServer.xml 5440 -rw------- 1 root root 4071 Aug 1 2019 my-apcupsd-influxdb-exporter.xml 4355 -rw------- 1 root root 10536 Feb 27 01:00 my-binhex-delugevpn.xml 4387 -rw------- 1 root root 4039 Dec 4 2019 my-binhex-jackett.xml 4652 -rw------- 1 root root 5119 Jul 1 2019 my-binhex-krusader.xml 5442 -rw------- 1 root root 5023 Oct 14 2019 my-binhex-makemkv.xml 5450 -rw------- 1 root root 7624 Sep 26 19:26 my-binhex-minecraftbedrockserver.xml 5448 -rw------- 1 root root 7531 Sep 26 18:02 my-binhex-minecraftserver.xml 5435 -rw------- 1 root root 3554 Mar 26 2019 my-binhex-plex.xml 5444 -rw------- 1 root root 3768 Dec 10 2019 my-binhex-radarr.xml 4418 -rw------- 1 root root 4366 Feb 27 01:00 my-binhex-sonarr.xml 4532 -rw------- 1 root root 3284 Sep 26 17:27 my-duckdns.xml 5441 -rw------- 1 root root 8722 Feb 22 22:14 my-letsencrypt.xml 4558 -rw------- 1 root root 2769 Feb 23 01:00 my-mariadb.xml 5447 -rw------- 1 root root 3222 Mar 29 2020 my-mylar.xml 4505 -rw------- 1 root root 3277 Feb 23 01:00 my-nextcloud.xml 4253 -rw------- 1 root root 3693 Feb 28 15:53 my-openvpn-as.xml 4288 -rw------- 1 root root 8505 Feb 28 15:48 my-swag.xml 4448 -rw------- 1 root root 4247 Dec 29 01:00 my-tautulli.xml 5438 -rw------- 1 root root 8851 Aug 1 2019 my-telegraf.xml 5446 -rw------- 1 root root 4054 Mar 29 2020 my-ubooquity.xml

Getting an error in Fix Common Problems - said that a certain file is corrupted. However, when I go to this location on the flash drive, it's not there. /boot/config/plugins/dockerMan/templates/appdefs.xml Not sure where to find said file or fix the error.

Add what where?

So I've spent the better part of 3 hours on this tonight and I have 2 "errors" left in my Nextcloud setup. Fresh 21.0.0 install Fresh SWAG install Using duckdns.org and Spaceinvader's setup video. I can't for the life of me figure out what to edit and where. I see NGINX posts saying to edit something here, I see others saying to edit .htaccess files. None of the searches I've done here and abroad have lead to a concrete "edit this, do this here" answer. At the end of my proverbial rope and patience.

They share all of the following: Drive cage (handles power & SATA connections to the drive) HBA SFF 8087 Cable I'm looking into a new HBA. Next after that is a PSU upgrade (650W right now) and instead of using the rosewill cage, do a direct connection to the drives.

@JorgeB Attached below. diagnostics_files.zip

I've been fighting this for a week or two now. A drive will just disable from the array. So I'll make sure everything's off the drive, run an extended SMART test but not see major errors. This has now happened 3 times. Need to figure out where my problem is here so I can fix it. The 3 drives here are all shucked WD Whites. HBA is an LSI 9208, and they're sitting in a Rosewill hot swap 4 drive cage. Attaching syslog and the SMART drive readouts for the 3 drives in question. syslog.txt WDC_WD80EMAZ_20210129-1033.txt WDC_WD100EMAZ_20210129-1033.txt WDC_WD120EDAZ_20210129-1033.txt

@binhex Working now! Weird, I hadn't changed anything from yesterday to today (was using the SOCKS login for well over a year without issue). Thanks!

Nada - the log file just keeps spitting out log errors. Web UI won't load and it starts to bog down the server. 2020-11-03 10:44:37,594 DEBG 'start-script' stdout output: [info] Starting OpenVPN (non daemonised)... 2020-11-03 10:44:37,599 DEBG 'start-script' stdout output: 2020-11-03 10:44:37 DEPRECATED OPTION: ncp-disable. Disabling cipher negotiation is a deprecated debug feature that will be removed in OpenVPN 2.6 2020-11-03 10:44:37,599 DEBG 'start-script' stdout output: 2020-11-03 10:44:37 DEPRECATED OPTION: --cipher set to 'aes-256-gcm' but missing in --data-ciphers (AES-256-GCM:AES-128-GCM). Future OpenVPN version will ignore --cipher for cipher negotiations. Add 'aes-256-gcm' to --data-ciphers or change --cipher 'aes-256-gcm' to --data-ciphers-fallback 'aes-256-gcm' to silence this warning. 2020-11-03 10:44:37 WARNING: file 'credentials.conf' is group or others accessible 2020-11-03 10:44:37 OpenVPN 2.5.0 [git:makepkg/a73072d8f780e888+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Oct 27 2020 2020-11-03 10:44:37 library versions: OpenSSL 1.1.1h 22 Sep 2020, LZO 2.10 2020-11-03 10:44:37,599 DEBG 'start-script' stdout output: 2020-11-03 10:44:37 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts 2020-11-03 10:44:37,599 DEBG 'start-script' stdout output: 2020-11-03 10:44:37 CRL: loaded 1 CRLs from file -----BEGIN X509 CRL----- xxxxxxx -----END X509 CRL----- 2020-11-03 10:44:37,600 DEBG 'start-script' stdout output: 2020-11-03 10:44:37 TCP/UDP: Preserving recently used remote address: [AF_INET]199.36.223.212:1198 2020-11-03 10:44:37 UDP link local: (not bound) 2020-11-03 10:44:37 UDP link remote: [AF_INET]199.36.223.212:1198 2020-11-03 10:44:37,715 DEBG 'start-script' stdout output: 2020-11-03 10:44:37 [montreal410] Peer Connection Initiated with [AF_INET]199.36.223.212:1198 2020-11-03 10:44:38,888 DEBG 'start-script' stdout output: 2020-11-03 10:44:38 AUTH: Received control message: AUTH_FAILED 2020-11-03 10:44:38,888 DEBG 'start-script' stdout output: 2020-11-03 10:44:38 SIGTERM[soft,auth-failure] received, process exiting

Still having issues with this... Current log file errors: Current settings in the OVPN file: client dev tun proto udp remote ca-montreal.privacy.network 1198 resolv-retry infinite nobind persist-key data-ciphers-fallback aes-256-gcm ncp-disable auth sha1 tls-client remote-cert-tls server auth-user-pass credentials.conf compress verb 1 2020-11-03 10:30:29,801 DEBG 'start-script' stdout output: 2020-11-03 10:30:29 AUTH: Received control message: AUTH_FAILED 2020-11-03 10:30:29,801 DEBG 'start-script' stdout output: 2020-11-03 10:30:29 SIGTERM[soft,auth-failure] received, process exiting 2020-11-03 10:30:29,802 DEBG 'start-script' stdout output: [info] Starting OpenVPN (non daemonised)... 2020-11-03 10:30:29,807 DEBG 'start-script' stdout output: 2020-11-03 10:30:29 DEPRECATED OPTION: ncp-disable. Disabling cipher negotiation is a deprecated debug feature that will be removed in OpenVPN 2.6 2020-11-03 10:30:29,807 DEBG 'start-script' stdout output: 2020-11-03 10:30:29 WARNING: file 'credentials.conf' is group or others accessible 2020-11-03 10:30:29 OpenVPN 2.5.0 [git:makepkg/a73072d8f780e888+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Oct 27 2020 2020-11-03 10:30:29 library versions: OpenSSL 1.1.1h 22 Sep 2020, LZO 2.10 2020-11-03 10:30:29,807 DEBG 'start-script' stdout output: 2020-11-03 10:30:29 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts 2020-11-03 10:30:29,808 DEBG 'start-script' stdout output: 2020-11-03 10:30:29 CRL: loaded 1 CRLs from file -----BEGIN X509 CRL----- XXXXX -----END X509 CRL----- 2020-11-03 10:30:29,808 DEBG 'start-script' stdout output: 2020-11-03 10:30:29 TCP/UDP: Preserving recently used remote address: [AF_INET]172.98.71.91:1198 2020-11-03 10:30:29 UDP link local: (not bound) 2020-11-03 10:30:29 UDP link remote: [AF_INET]172.98.71.91:1198 2020-11-03 10:30:30,014 DEBG 'start-script' stdout output: 2020-11-03 10:30:30 [montreal402] Peer Connection Initiated with [AF_INET]172.98.71.91:1198