KoNeko

When i edit a template and i add a port i see this when i have it on anything else than bridge. When i put it on bridge i see containerport and Host port.

Yes i agree, doing it all in 1 go is a hard task as ZFS isnt that easy and pretty complex. Like next release introduce the ZFS pool. User can make a new "array" pool etc the normal zfs way with no ability to add a single+ hdd's. And work on it with new releases to increase support for ZFS to be more stable and better about it so that finally that you can make a ZFS array where you can do like you can do now with the unraid array but with the ZFS features. That would be almost the best of both worlds unraid and zfs.

Well ZFS or not ECC RAM is always a nice to have in the Unraid server. It helps extra against data corruption etc. For a normal PC it isnt really needed. But for a Nas system or a server with important stuff its a very nice thing to have. ECC is an additional feature which adds a new and directly applicable protection, something that does not exist in any capacity without ECC. ECC is always used on hardware RAID cards and by the same measure should be used when implementing software RAID or any other software storage technology which uses RAM as a cache or integrity calculation buffer.

would need atleast 1 extra empty disk in the system then to make a begin and copy the data. But we'll see when its that far. I think it will take some time before it will get a final version that can do this in unraid.

It would be really great when that is possible with ZFS yes. Best of both worlds. The freedom of how Unraid does it currently and the extra taht ZFS offers. Would be great if we can convert our current array to the new zfs one with this feature. Ofcouse with the hope that you can add any size upto the parity one etc.

if you going to make a ZFS pool does that still enable adding hdds like we currently can in that pool. In normal ZFS that isnt that easy/impossible ?

Old topic Sure but would be great to beable to add in the template that you can do the multiport thing. Also if the docker is on Custom Br:0 so i can give it a own IP. i cant "redirect" ports like when its on bridge.

i got a own mail server in a VPS that runs fine. mostly my gmails are for the older things i still use and for some spam things. there is docker-mailserver. but that is a complete mail server. Im just looking for somekind of client that can pull all mail and store it. So if the email on the other email is removed or whatever i still have a copy local on my unraid. Before my unraid i had qnap and it had a qmailclient that could do that. But that is for qnap only and its paid now which wasnt when i was using it. there is fetchmail or getmail those are in a docker but havnt been updated for years.

Im looking for a way to backup my email adresses like my @gmail's and my @own domains. Is there a docker or plugin where i can fetch the emails from those email adreses via Imap?

Im wondering how to restore a VM backup.

is it possible to change some sections from the like the first row to the second or rd row on the frontpage? because my first row is getting long while the 2nd and 3rd are the standard ones.

Swap stopped renewing my Letsencrypt cert since this week. i didnt change anything in the docker or any config file of this docker. i do it via DNS which always worked the credentials are in the ini file at that location. Failed to renew certificate .nl with error: Missing properties in credentials configuration file /config/dns-conf/transip.ini: * Property "certbot_dns_transip:dns_transip_key_file" not found (should be RSA key file(convert with openssl rsa -in transip.key -out decrypted_key)). * Property "certbot_dns_transip:dns_transip_username" not found (should be Transip username). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - All renewals failed. The following certificates could not be renewed: EDIT: maybe its new or it got removed somehow but after i added and restarted the container its all fixed.

It seems the Linuxserver/rutorrent isnt beeing updated anymore or so. So was checking this. But it has stuff like VPN which i dont need. I can disable it i saw that is ok. BUT can i also move ALL my settings over from the old one to this one ? Just copy some files start and it works again ?

I run all my Dockers on br0. all have a custom IP that i assigned. i read vlan this and vlan that. Why would i want to do that? if it fix the locks that isnt a good reason in my Book because then something is wrong. and the setting this up without the Vlan should not be possible. i just trying to find out why this happens. I dont like answers like So you have put it on Vlan than it works. That sounds to me like when you go with your car to the garage and say my car isnt driving anymore but backwards/reverse still works and the Garage says so then you just drive it in reverse. i had a Medusa docker which was the only one not on br0 but that one seems to be gone after i tried to safe settings. So i have to recreate that one now Its runnin for 5+ days now.

like many i have this problem since upgrading to 6.9.1 from 6.8.3 Im running a docker that runs on bridge. not the custom BR0 ip and that one was also not availble Friday my dockers were still running and could access them. But now that also stopped. I can reboot the server via SSH. But im not planning to do this every X days. So Question. What is the solution to this ? Because the way i see it this is a BUG that started at 6.9.X for me.

i know i can reboot the server. But this problem started at 6.9.1 never had that problem with 6.8.1 and i do have custom ip's for docker yes. Question is if i reboot it does it stay fixed. i dont want to reboot it every X days just because of this "bug".

added the diagnostics that i got via SSH thanekos-diagnostics-20210320-2020.zip

I have upgrade to unraid 6.9.1 from 6.8.3 some time ago. today i noticed ( im not that often in the Gui) that i cant enter the unraid gui anymore. By IP nore unraid name. everything that runs on it still works. Dockers and i can still access the shares and copy things to it from it. i can also SSH into it. I did clean my cache but i cant still enter the GUI. I also tried it on my phone same problem. This is the first time that i have Unraid that this happens to me and its since i upgrade to 6.9.1

Maybe a bit late. But i do have a KVM ( hdmi usb3.0) switch it works fine normally but i cant put tho my KB to the windows VM on unraid. Video and Mouse are working correctly. SO not sure if its the switch i use or the keyboard i use.

Well what i did was did a factory reset on my mainboard. mine also has a BMC vga output port i put that as the main videocard of the computer. Enabled the iommu stuff again. did a reinstall of the VM and its working again. and i dont see any lag that i can notice. still have to do more tests and install steam etc on it to test. but it looks nicely. i didnt change anything in the XML for this. Only problem that i have i cant put tho my keyboard Nov 17 19:35:39 kernel: input: Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Keyboard as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:1B1C:1B2D.0025/input/input66 Nov 17 19:35:39 kernel: input: Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:1B1C:1B2D.0025/input/input67 Nov 17 19:35:39 kernel: input: Corsair Corsair Gaming K95 RGB PLATINUM Keyboard as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:1B1C:1B2D.0025/input/input68 Nov 17 19:35:39 kernel: input: Corsair Corsair Gaming K95 RGB PLATINUM Keyboard as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:1B1C:1B2D.0025/input/input69 Nov 17 19:35:39 kernel: input: Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Mouse as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:1B1C:1B2D.0025/input/input70 Nov 17 19:35:39 kernel: hid-generic 0003:1B1C:1B2D.0025: input,hiddev97,hidraw1: USB HID v1.11 Keyboard [Corsair Corsair Gaming K95 RGB PLATINUM Keyboard] on usb-0000:01:00.0-1.4/input0 Nov 17 19:35:39 kernel: hid-generic 0003:1B1C:1B2D.0026: hiddev98,hidraw2: USB HID v1.11 Device [Corsair Corsair Gaming K95 RGB PLATINUM Keyboard] on usb-0000:01:00.0-1.4/input1 i use a HDMI switch that has my Mouse and Keyboard. It does see my mouse but not my K95

i tried it again. but all i got now is 2020-11-16T18:50:19.072503Z qemu-system-x86_64: -device vfio-pci,host=0000:0b:00.0,id=hostdev0,bus=pci.3,addr=0x0,romfile=/mnt/cache/system/vbios/Palit.GTX980.4096.rom: Failed to mmap 0000:0b:00.0 BAR 3. Performance may be slow 2020-11-16T18:50:19.386211Z qemu-system-x86_64: vfio: Cannot reset device 0000:0d:00.3, depends on group 21 which is not owned. 2020-11-16T18:50:20.438181Z qemu-system-x86_64: vfio: Cannot reset device 0000:0d:00.3, depends on group 21 which is not owned. and the log is filling up VERY quickly with these lines. like matter of seconds and the /var/log/syslog is full. Need to reboot to get it cleared. 2020-11-16T19:36:52.808331Z qemu-system-x86_64: vfio_region_write(0000:0b:00.0:region3+0x10eb41c, 0x0,4) failed: Device or resource busy 2020-11-16T19:36:52.808344Z qemu-system-x86_64: vfio_region_write(0000:0b:00.0:region3+0x10eb420, 0x0,4) failed: Device or resource busy 2020-11-16T19:36:52.808356Z qemu-system-x86_64: vfio_region_write(0000:0b:00.0:region3+0x10eb424, 0x0,4) failed: Device or resource busy 2020-11-16T19:36:52.808368Z qemu-system-x86_64: vfio_region_write(0000:0b:00.0:region3+0x10eb428, 0x0,4) failed: Device or resource busy

Ah yes. i never had to do that before when i installed a windows VM. This is the first time i had to do that. So i used the virtio iso and installed the network driver. But im thinking about passing tho 1 of the nics to that VM so it has a dedicated nic. Not sure if that will improve the performance of the VM it self.

with vnc it works normaly. With the gpu passthrough it does work but it seems a little bit laggy. even when i just click on file explorer.

i got a threadripper 2950x

I also have a problem with passing my GPU to my windows 10. runnin unraid 6.8.3 when i do all the above i get 2020-11-14 21:29:10.154+0000: Domain id=16 is tainted: high-privileges 2020-11-14 21:29:10.154+0000: Domain id=16 is tainted: custom-argv 2020-11-14 21:29:10.154+0000: Domain id=16 is tainted: host-cpu char device redirected to /dev/pts/0 (label charserial0) 2020-11-14T21:29:10.225526Z qemu-system-x86_64: warning: This family of AMD CPU doesn't support hyperthreading(2) Please configure -smp options properly or try enabling topoext feature. libusb: error [udev_hotplug_event] ignoring udev action bind in the log file. before when i didnt do that i got that vfio-pci 0000:0b:00.0: BAR 3: can't reserve [mem 0xd0000000-0xdfffffff 64bit pref] i can do the same for ubuntu VM without any of these things. It just works. Edit: It works it just Takes a very long time to get into windows. and it does not feel smooth. I gave it 12 core and 16 gb so should be smooth.