frodr
Members-
Posts
526 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Everything posted by frodr
-
I can't edit scripts. Holding the pointer of the cog, edit scrips is there. But nothing happens when pushing the button. kjell-diagnostics-20240110-1237.zip
-
Will the guide work on Jellyfin?
-
I have used app before, but now I can't´install it. Not able to get to the template. Diagnostic is added. If anybody care to describe how to troubleshoot an issue like this, I be happy to learn. kjell-diagnostics-20231211-1504.zip
-
After update to 6.12.5 I got this message asking me to visit the Support Forum. I'm not really sure if only visiting the Forum will avoid plugin issues, but I'm willing to give it a go. What is the cure here? helmaxx-diagnostics-20231130-1811.zip
-
The stub didn't work. Remove it - restart - enable stub, and I found 3090 appeared in device manager. I have restarted the server several times (10 at least) but that wasn't enough. OK. it works as second GPU. I haven't tried as primary.
-
Hi, I used to run one GamePC and one Unraid Server. The first was seldom in use and the latter pulled 300-400W. So, I made some changes closing the specific game PC, and added a lower powered 24/7 server. The Game PC is moved to a VM on the bigger server. I was able to get a few stages on the new WRC Rally game, but then the GPU passthrough failed. I have tried setting up the GPU as primary and secondary GPU, with and without passing through vbios (modified) and the mods in SIO´s video, but I can't get it (RTX3090) visible in Device Manager. I tried both Windows 10 and Windows 11. The VM is running on "Server 2" in the Signature. I'm tried to get in working over 2-3 days and about 10 hours work. Now I can need a push in the right direction. Cheers helmaxx-diagnostics-20231126-1901.zip
-
I followed the steps and could install the plugin successfully. After re-booting I could not set anything in the plugin Setting up number of VF´s, etc. before rebooting just resulted in the same plugin as above. A hint what I did wrong would be great. // Frode
-
I followed these steps, but couldn´t get it going. I copied the directories: "install" and "lib", as well as just the files "slack-desc" "i915.ko.xz" I got this error message installing the plugin: I guess a make some stupid mistake with the files to be copied. (Yes, I have started Linux beginners crash course. I shout when finished......) // Frode
-
Thanks. I have to ask again. Is it the 2 files "slack-desc" "i915.ko.xz" only, or the directories "install" and "lib"?
-
Should these two files be copied as is, or extracted first?
-
Jeez, blind man doing his thing. Thanks for the reading aid.
-
Hi, This plugin is brilliant. If I only can get it running. The plugin page lists no available Modes: Instructions are followed. HDMI dongle. Tried bios "Internal GPU" both "Auto" and "enabled". Hoping for some advise. kjell-diagnostics-20231107-1428.zip
-
Its working. Many thanks.
-
Should the boxes be ticked automatically after running the script? Mine do not. I see an Ethernet Controller, but the nic ref itself. //
-
NIC in System Devices and network.cfg file, but not in
frodr replied to frodr's topic in General Support
It can be on the bios level. No link. I tried disabling ASPM and changed some other setting, no luck. I´ll have a look at firmware etc. // -
NIC in System Devices and network.cfg file, but not in
frodr replied to frodr's topic in General Support
I found this in the mobo manual. Note 2 is kind a strange. (If you drive in lane b, you have to drive in a). My understanding is that slot 7 only supports x16. The nic is x8, that's why I put it there in the first place. I move it back and see if I can get it in Network setting. -
NIC in System Devices and network.cfg file, but not in
frodr replied to frodr's topic in General Support
I done that, but no change. Then I moved the NIC from slot 4 to slot 7. Then I see both ports in network settings. Still somewhat puzzled about why it's not visible in slot 4. OK, no problem having the nic in slot 7. But I can't get the nic to work. One port says "check cable", the other I can't get communication going. Pretty sure the cable is ok, tested 3 different including one that worked with this nic on the former mobo. Added diagnostics after I moved the nic. kjell-diagnostics-20231013-1526.zip -
Network Settings. Also, the nic is visible in bios. I deleted the the network.cfg file and restarted. No change. NIC is Intel E810-XXV in "server2". Happy for any help. // kjell-diagnostics-20231012-2357.zip
-
Thanks for responding to my questions. Much appreciated. Just for me to sure running this on 6.12.4: 1) Run the script "wget 'https://raw.githubusercontent.com/andre-richter/vfio-pci-bind/master/vfio-pci-bind.sh'; mv vfio-pci-bind.sh /boot/config/" 2) Run the cpmmand: "sudo echo 4 > /sys/class/net/eth1/device/sriov_numvfs" The driver is "ice". Do I have to run the "wget...." after every restart? //
-
Great, Can 02:00.1 and 02:00.0 also run on different subnet?
-
Thanks @BVD for your guide. Great work. Is it possible to run one port as is, and split into VFs on the other? And run VFs on a different subnet from the port not touched? // F
-
New Build - Testing HBA SAS Controllers
frodr replied to dmiles34's topic in Storage Devices and Controllers
Going from a LSI 9400-8i to a 10 port sata pcie card reduced power usage about 15W on my server. -
The power usage reduction was about 15W removing LSI 9400-8i and add a 10 port Sata pcie card.