SeattleBandit

soooo .... hoping for some help here i am installing a matrix stack on a recycled chomebox which is running ubuntu server using ansible because i thought it would be fun i set up a proxy-conf or matrix and element in swag so swag should handle the certs - but the ansible script is using letsencrypt and is failing Failed to obtain a certificate directly (by listening on port 80) and also failed to obtain by relying on the server at port 80 to proxy the request. See above for details. You may wish to set up proxying of /.well-known/acme-challenge to 2402 or, more easily, stop the server on port 80 while this playbook runs. thought i'd reach out as i'm kind of brain fried at hte moment

Just confirmed - booting to windows and then rebooting without powering down and booting into unraid assigns me a ip and the nic works

So I installed unraid today on a new machine I built just to run vm's BUT for whatever reason when I power on the machine and boot to the USB stick it doesn't detect my NIC - The nic is the onboard one on my z590 phantom gaming 4 ASRock board I installed Windows to check and make sure stuff works ... The I rebooted forget to boot to the USB and rebooted and booted to the USB and the nic registered and I had an IP - wonderful - I rebooted from unraid command line and booted back into unraid and no IP was assigned .. I know the cable and port are good - I updated the mainbaord firmware via the net I read somewhere about cold boots and warm boots and how that impacted access to the nic I've scrubbed through the bios - disabled the wireless networking on the bios - ensured the nic is enabled Any help would be very much appreciated!!!

I'm also running unifi - with IPS enabled - explains the issue

that explains it

no dice - tried everything - eventually gave up - was only doing this for fun anyways i do not know why the iso itself wasn't just shared - this seems overly complicated unless the tooling is building an iso unique to your hardware

i'm having similar issues - just keeps reporting errorcode 22 and 403's edit: actually disabling my pi-hole - i have seen a change of state ... so maybe i spoke to soon edit2: so it eventually errored out - restarted the container wiht pihole disabled - we'll see if that provides a different outcome - i was able to grab some of the packages but not all of them so i'm hoping its just an intermittent issue

so wheni open handbrake web gui - the little status circle inthe upper left spins briefly and thendisplays a red x - will attach a screen shot - i've tried on multiple machines - and multiple browers

so i've had an issue lately with two dockers i infreuently use - handbrake (this docker) and mkvtoolnix - both use some vnc client (guacamole?) to connect but i seem to be totally unable to connect to the gui when i open the website - i've tried all the usual tricks - different browers incognito mode etc - still no dice - since is the same vnc app pushing the gui for this docker and mkvtoolnix i figured i'd ask and see if anyone had some suggestions.

i am having issues with the pihole DoH DoT - when i fire it up the logs just keep looping saying unablet o start up /usr/local/bin/cloudfared doesn't exist- did a quick scrape of this with no luck - trying flipping turts repo now

so i skimmed and didn't see a result if i missed it my apologies - but my docker auto updated and now the gui won't load - the docker starts up and when i try and load the webgui - i just get a blank screen and no calibre app - looks like a new guacamole though tried doing a force update - i'm seeing nothing obvious in the logs any suggestions? edit: sooooooooooooo looks like my dark reader plugin was basically blanking the vnc - pebkac

using binhex/arch-sonarr:latest as the repo worked for me - i tried to force update prior and it didn't work, then i changed it to latest and it didn't look like it changed much but it worked fine

IPADDR:PORT in the unraid settings worked for me on port 3307

still waiting on spaceinvader's video ....

i totally missed the advanced check in the upper right of the docker tab - advanced gives me all the info i was wishing for - 🤦‍♂️

i see folks talking about force updating and geting a fixed/new release i do not see the option to apply update - is there a different process for 'force updating' ??

Much Obliged - you allowd me to let that 1 brain cell relax - wouldn't want to over tax him - i'm telling you foolery aside, - thanks for the summarization

HUH728080AL4200_2EGHH98X - 8 TB not spinning down ^^

so i've always used vancouver and port forwarding set to yes still fails for me - but setting to no - the application starts up fine

thats basically my use case - either daily syncs or weekly syncs - in the interim i'll just rsync the individual shares because it seems to lose its shit when backing up my plex meta stuff - i acutally kicked off a rsync for the entire array last night via ssh and let it run all night (forgot to add the 'time' command so i don't know how long it took) but it actually completed - maybe rsync just needed to relax and lets its emotions go to finish the sync. id love to script it but i haven't found a good solution for ssh keys yet - i've looked at the user scripts plugin (basically a front end for cron it seems like) but the few scripts i've put together to run on a schedule don't seem to work the way i expect them too. i'm eager to hear back from this mythical 'hoopster'

tried duplicati - it archives stuff and compresses it syncthing crapped the bed when i tried to set it up for my entire array any other suggestions?

so i am rsync'ing my entire array to a back up unraid box - i tried to do it initailly by mounting the unraid share in my primary unraid server and then just rsync-ing wiht in my primary server - but rsync hung and stopped working so i nixed it and switched to rsync'ing via ssh and it worked like a charm ... i mean it took like two plus days to do the back up but it worked. now i'm running rsync again on my master to push a fresh update via the smb share --- again it got half way through (ish) and crashed setting up a recurring job via ssh would be a pita because unraid doesn't retain ssh keys between boots and i'm lazy and i dont' want to do ssh-key-add or whatever it is has anyonen else had issues with rsync'ing lots of data across a smb share? i don't want to use a backup docker app because i don't want archived or encrypted local backup - i just want a slave

i switched to ca vancouver and it appears to be working happily as well fyi

did PIA's france..... server go down? its not completing connections after my latest reboot - no changes on my end

So I've done some googling and havent found a clear answer - I am building a second machine to run as an unraid back up server I'm not worried about the build out of untreated but I want my primary to clone all sorts and configs and dockets etc to the secondary server Any one done this faced any pitfalls or transfer issues? Have a guide recommendation? Sent from my GM1917 using Tapatalk