bobC

was not aware that rootshare was part of unassigned devices, thank you the information

just found an answer to this rootshare issue, i had removed the array as i was only using pools, i just set the array back up and the root share magicly starting working again. bug ? or feature?

today my rootshare appears to have stopped connecting to data, it mounts, but it doesnt connect to any data shares or pools syslog says there is no valid user share for smb, but i have aa user and the root user. this all occured after i scrubbed my zfspool, not sure if its related. any guidance would be greatly appreicated.

no issues here but noticed this, when selecting tools|updateOS a cloudflare screen is displayed,

upgraded 2 servers without any pain or issues. also accessed the servers via my andriod phone, wonderful access experience. congratulations to the team! outstanding job, as always.

Great, thanks for the explaination, everything is working perfectly, thanks to all for the info and support. Bob

Thanks for the response, the I configured my second unraid machine with the ups config as you suggested, what port number should i use, mine is showing UPS data without putting in the Port number thanks for the help Bob

I have a single APC UPS with 2 unraid servers connecrted to it, Dataport of UPS is connected to Unraid server 1, it will power down correctly on power loss, the second unraid server continues to run off battery until battery drains and abruptly shuts down, is it possible to have unraid server 1 shut down unraid server two when the UPS intiates a shutdown on unraid server 1 ?

wow your good! problem resolved, ill make sure i post in the specific container treads in the future thanks for the quick response and quick fix bc

gettting this status message in Bazarr v1.3.1 /downloads -> This Sonarr root directory does not seems to be accessible by Bazarr. Please check path mapping. anyone have any ideas ?

Same issue here on a ASUS B650F-F ROG STRIX wth Ryzen 9 7900X would sure like to get this data on my dashboard. have a second system with a 2700x and it works fine.

perfect!, then that solves my initial issue thanks for the help on this Bob

I set Enable User Share Assignment to no, due to I was having issues with RC5 where the data in the user share could be different then what was in the dataset disk share. that is how i found that appdata path could not be set to a zpool if enable share assignment is set to no. but you can set the docker vdisk location, Possibly the issue with different data in user share and the pool dataset no longer an issue with RC6 ? sounds like some changes where made regarding using bind-mounts in zfs.

yes appdata does exist (on the pool not the array) when i select the dropdown for default appdata location, it only shows shares i have on the array

additional question, in the docker config, it appears that you can not select a zfspool/ as a appdata default storage location, is this by design or a bug ? docker vdisk can be set to zfspool, but not appdata

limetech wrote the following, Shouldnt this be /mnt/mypool/myshare -> /mnt/user/myshare or am i just not reading this correctly ? Bob

installed the nvidia plugin and latest driver v530.41.03 , still no change. I have another server running a ASUS mb with a Ryzen w/ integrated graphics and it works fine. I have tried 2 different video cards now with the same results

on my local server, when I try to boot in GUi mode, i see the bootup script executing but once that is complete, the screen clears and i just see a prompt blinking at the top of the screen. I'm running a MSI video card, with an Asrock X570 mb, and a ryzen 2700x (no gpu) im attaching the diagnostics file, any help would be greatly appreciated mserver-diagnostics-20230510-1310.zip

is the file ab_20230501_030001 an old version of the backup also ?

having an issue while trying to restore, select backup drop-down doesn't display any backups, always just displays the one shown below, (01.05.2023) the backup source shows my backups, any ideas ?

I have an Asrock X570M4Pro its a mATX board with a AM4 socket, supports 8 SATA3 onboard, and 2 NVMe M.2 slots its a good board.

Thanks for the response, I started to move data over to the zfs pool now, what i did do was to rename the shares with a "1" suffix after the share name, then created a new share with the original share name pointing it to the zfs pool, then used Dynamix File Manager to copy the data over to the newly created share, once i know everything is good, then i will delete the renamed share from the array. everything seems good so far appreciate the help

Yes, it does not seem to recognize that there is a zfs pool to move/copy to/from , it would be wonderful to see an update on this fine app,

Is there a recommended way to move array folders/data over to a zfs pool. best way to copy or move ? how to deal with shares, etc ? Bob

Found this, https://www.phoronix.com/news/Linux-6.3-HWMON which includes my motherboard, looks like Unraid is a 6.1.23 not sure if there is a way to import from git? Linux 6.3 Supports Sensor Monitoring For Many ASUS B650/B660/X670 Motherboards