guy.davis Posted July 29, 2021 Author Share Posted July 29, 2021 (edited) 1 hour ago, cjizzle said: I have appx 900 plots using pool contract address and 400 old school...been replotting. The old school plots are on a Windows machine and pool plots on Unraid server using Machinaris to farm. Found out my windows machine was taking over a minute to verify proofs so it was pointless. Anyways I set up Machinaris to access the windows shares, it recognized them fine and still less than a second access time. When I got the daily summary though it still showed only the pool plots even though in the Summary tab it shows all plots being scanned. Does this mean Machinaris will only do pools OR solo, not both? Hi, I think the issue is that Machinaris needs to know about all the various directories which hold your plots (regardless of type). Please verify that your "plots_dir" variable is set to a colon-separated list of all your in-container paths. Double-check there is not a duplicate variable by toggling Advanced View and clicking 'Show more settings." Details here. Quote Also found my first XFX proof since the above change but no XFX coin was "delivered". Not like its worth anything right now but still... Interesting, maybe your Flax blockchain or wallet are not fully synced? I've gotten a few XFX so far and they did eventually show up. You could check their Github and report an Issue. Hope this helps! Edited July 29, 2021 by guy.davis Quote Link to comment
cjizzle Posted July 29, 2021 Share Posted July 29, 2021 (edited) 2 hours ago, guy.davis said: Hi, I think the issue is that Machinaris needs to know about all the various directories which hold your plots (regardless of type). Please verify that your "plots_dir" variable is set to a colon-separated list of all your in-container paths. Double-check there is not a duplicate variable by toggling Advanced View and clicking 'Show more settings." Details here. Thanks. Yes everything is set correctly per your instructions (I believe lol) and no duplicate variable. plots_dir is a variable /plots:/plots1:/plots2:/plots3:/plots4:/plotspool All the smb shares are mapped in the container settings with the network location In the config.yaml plot_directories: - /plotspool - /plots - /plots1 - /plots2 - /plots3 - /plots4 Right now I see Plots Passed Filter as 7/1251 .77290 seconds Appx 400 of those plots are on the Windows machine, the rest on the Unraid server itself. Last Summary reported 836 plots Also the XFX proof was found appx 10 hours ago. I did check and all wallets and blockchains are synced. Just realized I didn't port forward 6888 for flax, so maybe I went past the 30 second limit. 2 proofs missed looking back. Guess we will see if that fixes the flax issue. Edited July 29, 2021 by cjizzle Quote Link to comment
guy.davis Posted July 29, 2021 Author Share Posted July 29, 2021 Hi, try the following to investigate the issue of plot count, run via the Docker Console for the Machinaris container on Unraid: env | grep -i plots_dir chia plots show chia farm summary If the "plots show" includes some folders you're not expecting, they can be removed with: chia plots remove -d /some/container/directory If all above is correct and you're still seeing incorrect Plot Count on both Summary and Farming page, then please consult the logs looking for errors. Quote Link to comment
stubennatter Posted July 30, 2021 Share Posted July 30, 2021 so my problem doesn't go I have 2 pools on my windows pc it show both pools the docker only the newer one i delet the database and resync it tooks 5 days... But nothing changed, my Windows pc connect to both right to the pool, but the unraid docker container not. I don't know what must I do that unraid docker connect to my both pools that I made Quote Link to comment
guy.davis Posted July 30, 2021 Author Share Posted July 30, 2021 (edited) 3 hours ago, stubennatter said: I have 2 pools on my windows pc it show both pools the docker only the newer one But nothing changed, my Windows pc connect to both right to the pool, but the unraid docker container not. I don't know what must I do that unraid docker connect to my both pools that I made Good day, your mnemonic seed phrase is the private key that points to your wallet and plotnft on the blockchain. Please ensure you are using the same seed phrase on both your Windows and Unraid systems. See: https://github.com/guydavis/machinaris/wiki/Keys#import-key-mnemonic Once fully synced, check your Settings | Pools page (or enter "chia plotnft show") at the Docker console for Machinaris. Hope this helps! Edited July 30, 2021 by guy.davis Quote Link to comment
rik3k Posted July 31, 2021 Share Posted July 31, 2021 (edited) Suddenly I’m encountering a lot of ‘Seeking plots took too long’ issues and I really can’t pinpoint where they are coming from. CPU/RAM is not an issue as neither are anywhere close to maxed out. I shut off everything else (VM/dockers) and still have the same issue. Restarted the container. Drive read speeds don’t appear problematic. Logs don’t give much info except simply ‘plots took too long’. Any suggestions on where to look next? EDIT: OK I have found my issue. I plot with madmax in ram/nvme but phase 5:0 was holding me up. I am using an SSD cache on my Chiaplot share to speed up the process. However, I can only copy from my cache to the main array at approx 20mb/s, which is slower than I plot. Over time my cache fills up. If I disable cache completely, I get 50mb/s from my nvme direct to array. I solved this by allowing a 2nd plot to start at phase 5 but I wonder what is causing this behavior. I thought it was due to the container polling the plots on the cache drive but this speed persists even with the docker container shut down. Edited July 31, 2021 by rik3k Quote Link to comment
DaPedda Posted July 31, 2021 Share Posted July 31, 2021 (edited) Hey Guys, i would like to Forward a Message sent in Discord at SpacePool: "Hey guys, I tried to join your SpacePool today. I use a Docker container machinaris for this. If I click on the suggested link on the right to copy, then I get the following result: https://eu1.pool.space/ I entered this link in machinaris and Log tells me: "Exception from 'wallet' Error connecting to pool https://eu1.pool.space/: Response from https://eu1.pool.space/ not OK: 404" It killed my 100 mojos When I tried to use https://eu1.pool.space/, machinaris correctly said: "Will create a plot NFT and join pool: https: //eu1.pool.space.Error creating plot NFT: {'error': 'Not enough balance in main wallet to create a managed plotting pool. ',' success': False} " How can you please help me? Kind regards, Peter" Some Guys said, to join tho Pool takes only 1 Mojo, but all my 100 mojos are gone. Where ist the Mistake? Edited July 31, 2021 by DaPedda Quote Link to comment
Malixk Posted August 1, 2021 Share Posted August 1, 2021 Fyi. Machy has an discord too. https://discord.gg/xW2bH3YF Quote Link to comment
DaPedda Posted August 1, 2021 Share Posted August 1, 2021 1 hour ago, Malixk said: Fyi. Machy has an discord too. https://discord.gg/xW2bH3YF Thanks, I have received more mojos and can now join a pool Quote Link to comment
DaPedda Posted August 1, 2021 Share Posted August 1, 2021 Hello community, how does machinaris decide where to write the next plot to? I have entered two directories, let's call them plot6 and plot7. Machinaris mostly only wants to write to plot7. plot7 has more data than plot6. Greetings Peter Quote Link to comment
Malixk Posted August 1, 2021 Share Posted August 1, 2021 (edited) 6 hours ago, DaPedda said: Hello community, how does machinaris decide where to write the next plot to? I have entered two directories, let's call them plot6 and plot7. Machinaris mostly only wants to write to plot7. plot7 has more data than plot6. Greetings Peter Machy is just an new gui over some popular systems for chia. what realy does the plotting is plotman. my guess its puts new plots in the lowes line folder. You might want so read up on Archiving here https://github.com/guydavis/machinaris/wiki/Plotman#archiving https://github.com/ericaltendorf/plotman/wiki/Archiving Edited August 1, 2021 by Malixk 2 Quote Link to comment
Ystebad Posted August 4, 2021 Share Posted August 4, 2021 If anyone can help me with getting pool plots to work I'd greatly appreciate it. As far as I know I'm connected to flex pool.io pool. I've been mining pool plots for close to two weeks. yet I am seeing nothing back and when I go to check on my address on their website (using the wallet found after Payout instructions (pool will pay to this address)) it says "Specified address was not found in our system. Try waiting some time if you are already mining." I figure some of you must be using Machinaris to mine to flex pool so greatly appreciate any help getting this working. I've spent a huge amount of money on chia with literally NOTHING to show for it after months of farming and I'm extremely frustrated. My info: ------ # chia plotnft show Wallet height: 665859 Sync status: Synced Wallet id 2: Current state: FARMING_TO_POOL Current state from block height: 567495 Launcher ID: 8e700e562052fbe7daeaaedb9238f343c63053036f8d2aaf154ec2fcc78c91eb Target address (not for plotting): xch1d00purr0n5ae8hz706rcwge90m09w00wa4v78d9fpawgdhs6p0fsjt6rd8 Owner public key: 84017b3c91752f9a53313cc716b29fe9b45f922610cfca2065f5a9e10f30bbdc4a96d6b8e5d99341e175b1db902a0220 P2 singleton address (pool contract address for plotting): xch1dkcnya3m22la6q5625xu0ra0r7wwnj9aeqffay24xa26yktg89xqkgsgrc Current pool URL: https://xch-us-east.flexpool.io Current difficulty: 1 Points balance: 9999 Relative lock height: 100 blocks Payout instructions (pool will pay to this address): xch1z4xzuuea0yakj8wudayzh9t3kny4pxhkk3at7z7m7073wuxungqsczhkqv Wallet id 3: Current state: FARMING_TO_POOL Current state from block height: 567420 Launcher ID: f2b4ae1b6f1dcdcd8d0e4046447ae576f4a5b85fa8f0f12ceae270bb02b6bd1b Target address (not for plotting): xch1d00purr0n5ae8hz706rcwge90m09w00wa4v78d9fpawgdhs6p0fsjt6rd8 Owner public key: a3f36abcba4f297329890129b8996fc5491f69362c1719dd3a6ceed9a3ec656cbdd1c2664bac1e6335dce187c03a948a P2 singleton address (pool contract address for plotting): xch1lhzxecj0x29qr8gmzjklqe00z8za0nfhyhpmj8xekkf365qectjqz5q3xa Current pool URL: https://xch-us-east.flexpool.io Current difficulty: 1 Points balance: 9999 Relative lock height: 100 blocks Payout instructions (pool will pay to this address): xch13d9s8vv96h9px2wczjuxqxl88uvgqg3qzc7609pqnqsyyxyveeqqheks2s Quote Link to comment
DaPedda Posted August 6, 2021 Share Posted August 6, 2021 On 8/4/2021 at 2:47 AM, Ystebad said: P2 singleton address (pool contract address for plotting): xch1dkcnya3m22la6q5625xu0ra0r7wwnj9aeqffay24xa26yktg89xqkgsgrc Hey, do you have enabled the pool_contract_address: under plotting in the plotman.yaml? looks like "pool_contract_address: xch1dkcnya3m22la6q5625xu0ra0r7wwnj9aeqffay24xa26yktg89xqkgsgrc" Quote Link to comment
DCcrypto Posted August 7, 2021 Share Posted August 7, 2021 Hello, I am having a hard time finding why my wallet is taking a long time to sync up. I am using the regular chia app at the moment to farm on another machined and it is working well. Node and wallet both synced up but in Machinaris the node is synced but the wallet seems to have stalled on me. I have port forwarding set up to port 8444 and the machinaris server. Can someone help me get this fixed up please. I was wondering if running the chia app on the network was stopping the wallet in Machinaris from syncing up? Quote Link to comment
DaPedda Posted August 7, 2021 Share Posted August 7, 2021 hello community, is there a chance to see the "pool login link" under machinaris? In my case, Spacepool's. Thank you very much. Quote Link to comment
DaPedda Posted August 7, 2021 Share Posted August 7, 2021 26 minutes ago, DaPedda said: hello community, is there a chance to see the "pool login link" under machinaris? In my case, Spacepool's. Thank you very much. Open a Docker Machinaris Shell and type in: chia plotnft get_login_link -l 'Your Launcher ID' Quote Link to comment
Malixk Posted August 8, 2021 Share Posted August 8, 2021 (edited) 23 hours ago, DCcrypto said: Hello, I am having a hard time finding why my wallet is taking a long time to sync up. I am using the regular chia app at the moment to farm on another machined and it is working well. Node and wallet both synced up but in Machinaris the node is synced but the wallet seems to have stalled on me. I have port forwarding set up to port 8444 and the machinaris server. Can someone help me get this fixed up please. I was wondering if running the chia app on the network was stopping the wallet in Machinaris from syncing up? you can copy over the DB folder from the windows too machy. you can also add the windows node to machy via ip on the windows machine Edited August 8, 2021 by Malixk 1 Quote Link to comment
Ystebad Posted August 8, 2021 Share Posted August 8, 2021 (edited) On 8/6/2021 at 11:22 AM, DaPedda said: Hey, do you have enabled the pool_contract_address: under plotting in the plotman.yaml? looks like "pool_contract_address: xch1dkcnya3m22la6q5625xu0ra0r7wwnj9aeqffay24xa26yktg89xqkgsgrc" @DaPeddaYes I had done that already: pool_contract_address: xch1z4xzuuea0yakj8wudayzh9t3kny4pxhkk3at7z7m7073wuxungqsczhkqv Edited August 8, 2021 by Ystebad Quote Link to comment
Ystebad Posted August 8, 2021 Share Posted August 8, 2021 I guess I'm giving up on this and installing a windows VM and running the actual chia client. I've spent weeks trying to get this to work have almost 1000 plots and not a single dime of chia to show for it. Pool won't support me as they say machinaris in unsupported client so as much as I hate windows, I'm going that way. Hope this continues, maybe someday I'll try again. Quote Link to comment
SohailS Posted August 9, 2021 Share Posted August 9, 2021 what happens when the share which i store my plots on are full? do i just stop and farm? or will it continue to plot and overwrite? Quote Link to comment
guy.davis Posted August 9, 2021 Author Share Posted August 9, 2021 (edited) 20 hours ago, Ystebad said: I guess I'm giving up on this and installing a windows VM and running the actual chia client. I've spent weeks trying to get this to work have almost 1000 plots and not a single dime of chia to show for it. Pool won't support me as they say machinaris in unsupported client so as much as I hate windows, I'm going that way. Hope this continues, maybe someday I'll try again. Sorry to hear that. Machinaris is simply a WebUI in front of the standard Chia binaries, bundled in the Docker image. I've been on a week's vacation, so I missed this post. If you decide to try Machinaris again, please try dropping into the Discord server for more interactive assistance. Edited August 9, 2021 by guy.davis link to post on above Quote Link to comment
guy.davis Posted August 9, 2021 Author Share Posted August 9, 2021 7 hours ago, SohailS said: what happens when the share which i store my plots on are full? do i just stop and farm? or will it continue to plot and overwrite? Currently, plotman be paused on the last plot creation, likely in an error state. You can just Kill the last plot job which will remove the stale temp files. At that point, you can continue to farm without further plotting. Hope this helps! 1 Quote Link to comment
SohailS Posted August 10, 2021 Share Posted August 10, 2021 17 hours ago, guy.davis said: Currently, plotman be paused on the last plot creation, likely in an error state. You can just Kill the last plot job which will remove the stale temp files. At that point, you can continue to farm without further plotting. Hope this helps! Yes thanks get it. suppose i only farm or get more storage for plotting 1 Quote Link to comment
Einsteinjr Posted August 13, 2021 Share Posted August 13, 2021 Hey, good work on this docker/app. I have a strange issue that I've never seen before and maybe you can help. Basically, I can browse the webgui on 1 system of mine (the one I originally set everything up) and that's it. All the other systems (mobile (desktop requested), other full desktops, etc.) show what is essentially a poorly formatted mobile version. It doesn't matter which browser I use - all behave the same way: https://imgur.com/a/HHculQC Any suggestions on how I could debug this? Quote Link to comment
guy.davis Posted August 13, 2021 Author Share Posted August 13, 2021 (edited) 52 minutes ago, Einsteinjr said: Hey, good work on this docker/app. I have a strange issue that I've never seen before and maybe you can help. Basically, I can browse the webgui on 1 system of mine (the one I originally set everything up) and that's it. All the other systems (mobile (desktop requested), other full desktops, etc.) show what is essentially a poorly formatted mobile version. It doesn't matter which browser I use - all behave the same way: https://imgur.com/a/HHculQC Any suggestions on how I could debug this? Hi, not sure I understand. Please provide some more details. Also take a look at setting up a single Machinaris Controller (fullnode) and multiple Machinaris Workers (harvesters,plotters or both): https://github.com/guydavis/machinaris/wiki/Workers Edited August 13, 2021 by guy.davis link to wiki Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.