Marshalleq Posted November 26, 2021 Share Posted November 26, 2021 So the container installed easily enough. What are people doing for a torrent application? I'd rather have this on unraid than on my local machine - any votes for best container? Thanks. Quote Link to comment
biggiesize Posted November 26, 2021 Author Share Posted November 26, 2021 8 minutes ago, Marshalleq said: So the container installed easily enough. What are people doing for a torrent application? I'd rather have this on unraid than on my local machine - any votes for best container? Thanks. I'm glad that everything went smoothly for you so far. Personally, for torrenting, I use qbittorrent from the LinuxServer guys with the VueTorrent WebUI but I have also used Deluge from Binhex. Either are excellent choices. It really depends on your personal preference. Quote Link to comment
Marshalleq Posted November 26, 2021 Share Posted November 26, 2021 Thanks, so linking those with this, they both support using a proxy? I've been using all in one containers up til now, but some recent changes in the binhex one has made me look elsewhere. Quote Link to comment
biggiesize Posted November 26, 2021 Author Share Posted November 26, 2021 11 minutes ago, Marshalleq said: Thanks, so linking those with this, they both support using a proxy? I've been using all in one containers up til now, but some recent changes in the binhex one has made me look elsewhere. They do support using a proxy but the safer option is to use the gluetun container as the network option. There are a few extra steps with ports and such but there are some excellent resources out there that show how to accomplish it. Here are a couple of resources. https://github.com/qdm12/gluetun/wiki/Connect-a-container-to-gluetun Quote Link to comment
Marshalleq Posted November 26, 2021 Share Posted November 26, 2021 Ah thanks, I wondered if there was another way, I'll take a look! In the meantime I tried qbittorrent, which is now working after quite some challenges with the unraid container and webui implementation - all good now though! Thanks again. 1 Quote Link to comment
Marshalleq Posted November 26, 2021 Share Posted November 26, 2021 Just watched it - I dislike video instructions a bit (having to go through 8 minutes of pain for a simple 2 lines sets my impatience on fire lol), but his videos are very good. So it's simply attaching one docker image to another. Awesome, thanks for the tip - I agree that's much better. Thanks. Quote Link to comment
Marshalleq Posted November 27, 2021 Share Posted November 27, 2021 So it works well for sabnzbd, qbittorrent and SurfShark. It didn't work so well for the *darr apps. Seemed to break after a few seconds. I'm not sure why, but anyway, those support proxy so just switched to that. Really nice find thank you! Quote Link to comment
anima Posted December 23, 2021 Share Posted December 23, 2021 is there a way that i can test if the container has established a connection with the VPN ? i have tried the curl command, but it does not work Quote Link to comment
monarc Posted December 23, 2021 Share Posted December 23, 2021 @anima you can use below command to get your public IP address. It always depends on the packages installed in your container. wget http://ipecho.net/plain -O - -q ; echo 1 Quote Link to comment
Ruffy Posted December 27, 2021 Share Posted December 27, 2021 Hello thanks for the docker, but i have the problem that i can not route other container trough it. i have setup the container (maybe there is a beginner friendly tutorial somewhere). have manually setup a custom network named gluevpn deleted the ports from the other containers and created the standard port in gluetun (as a new port), but it will not work Quote Link to comment
biggiesize Posted December 27, 2021 Author Share Posted December 27, 2021 41 minutes ago, Ruffy said: Hello thanks for the docker, but i have the problem that i can not route other container trough it. i have setup the container (maybe there is a beginner friendly tutorial somewhere). have manually setup a custom network named gluevpn deleted the ports from the other containers and created the standard port in gluetun (as a new port), but it will not work Did you also put the port in the FIREWALL_VPN_INPUT_PORTS variable? Quote Link to comment
lovingHDTV Posted December 29, 2021 Share Posted December 29, 2021 I have the docker up and running. I've added ports for sonarr, jacket, nzbget, qbittornet. Each docker can access the internet and I have verified it has the VPN IP address. Each docker works with its interface to the internet. Sonarr can find TV series, qbittorren is downloading torrents, etc. However, Sonarr cannot access the downloaders, nor jacket any longer. they just timeout. So I'm missing the piece that integrates them together. I must have messed something up. Suggestions? thanks david Quote Link to comment
lovingHDTV Posted December 29, 2021 Share Posted December 29, 2021 9 minutes ago, lovingHDTV said: I have the docker up and running. I've added ports for sonarr, jacket, nzbget, qbittornet. Each docker can access the internet and I have verified it has the VPN IP address. Each docker works with its interface to the internet. Sonarr can find TV series, qbittorren is downloading torrents, etc. However, Sonarr cannot access the downloaders, nor jacket any longer. they just timeout. So I'm missing the piece that integrates them together. I must have messed something up. Suggestions? thanks david Why do I find the answer 5 minutes after posting? I looked for an hour . . . Anyway for someone else that may have the same issue. You need to add the FIREWALL_OUTBOUND_SUBNETS Quote Link to comment
lovingHDTV Posted December 29, 2021 Share Posted December 29, 2021 (edited) Things are running fine now. Sonarr can successfully send requests to qbittorrent and nzbget and import the resulting downloads. In order to get nzbget to work I had to disable DOT. When I enable DOT, nslookup in GluetunVPN, nzbget and the other dockers it fails to work. I get the following: sh-5.1# nslookup secure.usenetserver.com Server: 127.0.0.1 Address: 127.0.0.1#53 ** server can't find secure.usenetserver.com: NXDOMAIN sh-5.1# nslookup www.google.com Server: 127.0.0.1 Address: 127.0.0.1#53 Non-authoritative answer: Name: www.google.com Address: 142.250.191.196 Name: www.google.com Address: 2607:f8b0:4009:81a::2004 This is true for the two docker I have that have nslookup installed. My DOT settings are fairly default. I just changed to quad9. Is there something I need to change in each docker to get this to work? If I run it on the unraid machine I get: root@tower:/mnt/cache/appdata/gluetun# nslookup secure.usenetserver.com Server: 192.168.1.1 Address: 192.168.1.1#53 Non-authoritative answer: secure.usenetserver.com canonical name = news.usenetserver.com. news.usenetserver.com canonical name = us.na.news.geo.usenetserver.com. us.na.news.geo.usenetserver.com canonical name = news.iad.usenetserver.com. Name: news.iad.usenetserver.com Address: 85.12.62.221 Name: news.iad.usenetserver.com Address: 85.12.62.240 thanks Edited December 29, 2021 by lovingHDTV Quote Link to comment
Ruffy Posted December 29, 2021 Share Posted December 29, 2021 On 12/27/2021 at 11:02 PM, biggiesize said: Did you also put the port in the FIREWALL_VPN_INPUT_PORTS variable? ah ok no, i did only put it in FIREWALL_INPUT_PORTS Quote Link to comment
biggiesize Posted December 29, 2021 Author Share Posted December 29, 2021 7 hours ago, lovingHDTV said: Things are running fine now. Sonarr can successfully send requests to qbittorrent and nzbget and import the resulting downloads. In order to get nzbget to work I had to disable DOT. When I enable DOT, nslookup in GluetunVPN, nzbget and the other dockers it fails to work. I get the following: sh-5.1# nslookup secure.usenetserver.com Server: 127.0.0.1 Address: 127.0.0.1#53 ** server can't find secure.usenetserver.com: NXDOMAIN sh-5.1# nslookup www.google.com Server: 127.0.0.1 Address: 127.0.0.1#53 Non-authoritative answer: Name: www.google.com Address: 142.250.191.196 Name: www.google.com Address: 2607:f8b0:4009:81a::2004 This is true for the two docker I have that have nslookup installed. My DOT settings are fairly default. I just changed to quad9. Is there something I need to change in each docker to get this to work? If I run it on the unraid machine I get: root@tower:/mnt/cache/appdata/gluetun# nslookup secure.usenetserver.com Server: 192.168.1.1 Address: 192.168.1.1#53 Non-authoritative answer: secure.usenetserver.com canonical name = news.usenetserver.com. news.usenetserver.com canonical name = us.na.news.geo.usenetserver.com. us.na.news.geo.usenetserver.com canonical name = news.iad.usenetserver.com. Name: news.iad.usenetserver.com Address: 85.12.62.221 Name: news.iad.usenetserver.com Address: 85.12.62.240 thanks I'm assuming that BLOCK_MALICIOUS is set to "ON" for the Unbound DNS resolver, which it really should be for security reasons as it blocks IPs and hostnames for malicious sites. Usenetserver is a common false positive. You can simply put "usenetserver.com" (without quotes) in the UNBLOCK variable and it will resolve the issue. Quote Link to comment
lovingHDTV Posted December 29, 2021 Share Posted December 29, 2021 Tha 2 hours ago, biggiesize said: I'm assuming that BLOCK_MALICIOUS is set to "ON" for the Unbound DNS resolver, which it really should be for security reasons as it blocks IPs and hostnames for malicious sites. Usenetserver is a common false positive. You can simply put "usenetserver.com" (without quotes) in the UNBLOCK variable and it will resolve the issue. That worked fine. thanks Quote Link to comment
NLS Posted January 11, 2022 Share Posted January 11, 2022 HELP!? ddns-updater stopped working. When I start the container, it just immediately stops. No errors pop up. I removed (and the image) and reinstalled from user template (that worked fine from months). Same thing. Any ideas? How can I debug this? I need this functionality. Quote Link to comment
biggiesize Posted January 12, 2022 Author Share Posted January 12, 2022 4 hours ago, NLS said: HELP!? ddns-updater stopped working. When I start the container, it just immediately stops. No errors pop up. I removed (and the image) and reinstalled from user template (that worked fine from months). Same thing. Any ideas? How can I debug this? I need this functionality. Hmmm...have seen that one yet. Is there anything in the logs? Have you tried creating it under a different app name? Quote Link to comment
biggiesize Posted January 12, 2022 Author Share Posted January 12, 2022 4 hours ago, NLS said: HELP!? ddns-updater stopped working. When I start the container, it just immediately stops. No errors pop up. I removed (and the image) and reinstalled from user template (that worked fine from months). Same thing. Any ideas? How can I debug this? I need this functionality. Hmmm, haven't seen that one yet. Is there anything in the logs? Have you tried creating it under a different app name? Quote Link to comment
NLS Posted January 12, 2022 Share Posted January 12, 2022 4 hours ago, biggiesize said: Hmmm, haven't seen that one yet. Is there anything in the logs? Have you tried creating it under a different app name? Just change the name? No, I will try. I cannot see the logs (through the menu at least), as since the container is off, the log window just pops and closes. Is there another way to find logs for it? Quote Link to comment
NLS Posted January 12, 2022 Share Posted January 12, 2022 11 hours ago, biggiesize said: Hmmm, haven't seen that one yet. Is there anything in the logs? Have you tried creating it under a different app name? reinstalling with new name did nothing Quote Link to comment
biggiesize Posted January 12, 2022 Author Share Posted January 12, 2022 8 hours ago, NLS said: Just change the name? No, I will try. I cannot see the logs (through the menu at least), as since the container is off, the log window just pops and closes. Is there another way to find logs for it? Yes, but first, try to start the container just so it will be towards the end of the logs. Go to Tools->Diagnostics. At the bottom of the page there should be a download button (make sure anonymize is checked) and upload the here so I can take a closer look. 1 Quote Link to comment
biggiesize Posted January 13, 2022 Author Share Posted January 13, 2022 24 minutes ago, xiongster said: Getting error for wrong credentials. All detailes filled my me- Selecting PVN, VPN eamail and password and REGION. Is this a new install or was it previously working? Quote Link to comment
NLS Posted January 13, 2022 Share Posted January 13, 2022 20 hours ago, biggiesize said: Yes, but first, try to start the container just so it will be towards the end of the logs. Go to Tools->Diagnostics. At the bottom of the page there should be a download button (make sure anonymize is checked) and upload the here so I can take a closer look. I *think* there is no mention about ddns-updater container anywhere - but I can assure you I have it in my list of installed containers, I even removed it and re-added it 3 times. quasar-ultima-diagnostics-20220113-1525-anon.zip Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.