October 30, 2025Oct 30 52 minutes ago, ambricks said:I get the error "Wrong Pool State, PoolName-invalid expansion".Check to see if the pool needs to be upgraded first, click the first pool device and check the zpool status; if it's not that, please create a new bug report in https://forums.unraid.net/bug-reports/stable-releases/ and post the diagnostics.
October 31, 2025Oct 31 46 minutes ago, JorgeB said:Check to see if the pool needs to be upgraded first, click the first pool device and check the zpool status; if it's not that, please create a new bug report in https://forums.unraid.net/bug-reports/stable-releases/ and post the diagnostics.The pool needs upgrading. I was able to expand the pool after the upgrade. Thank you for the help. "The vdev's assumed parity ratio does not change, so slightly less space than is expected may be reported for newly written blocks..." - I saw this in another thread. Is there a way to know what the actual available free space in the pool is? Thanks.
October 31, 2025Oct 31 No issues upgrading from 7.1.4 to 7.2.0.Why is Unraid still using Firefox? Firefox is not your Dad's Firefox anymore.Unraid should switch to Brave, and apply the same privacy settings that Zorin OS did for version 17.3 and 18?
October 31, 2025Oct 31 Upgrade went very smoothly for me! Does anyone have detail on this feature from the release notes:Feature: Add favicon and web app manifest support
October 31, 2025Oct 31 9 hours ago, ambricks said:"The vdev's assumed parity ratio does not change, so slightly less space than is expected may be reported for newly written blocks..." - I saw this in another thread. Is there a way to know what the actual available free space in the pool is?This can be tricky, since due to a ZFS bug, capacity/used/free space stats are not correctly reported after a RAIDZ expansion. Just know that the extra capacity added can be fully used; just the reporting is wrong, and hopefully it will be fixed by OpenZFS in the future. More info here in the notes section: https://forums.unraid.net/topic/46802-faq-for-unraid-v6/page/4/#findComment-1537164
October 31, 2025Oct 31 Solid release. Ran both RC's with no critical issues. Just updated to final. No issues so far.
October 31, 2025Oct 31 Anyone know how I can upgrade install it on my 2GB usb stick? (Its 2gb because its a industrial stick)The OS runs in RAM so surely it should be able to copy the current usb key data to a drive on the array or cache then create the new usb stick in ram and write back to the USB stick?Current OS seems to use about 700 MB then plugins use another 300-500 MB.it wants 900 MB free on USB stick but there's 25+GB free RAM to use. Edited October 31, 2025Oct 31 by dopeytree
October 31, 2025Oct 31 7 minutes ago, dopeytree said:Anyone now how I can upgrade install it on my 2GB usb stick?Do the manual install process.Unraid keeps the previous version on the stick so you can downgrade, 2G is too tight. Got about 2.3GB used on mine. Edited October 31, 2025Oct 31 by Kilrah
October 31, 2025Oct 31 Just upgraded from 7.1.4 without issue.Any insight on what's changed regarding the below note in the changelog?Fix: Change Windows 11 VM defaultsMany thanks, as always, for your info - and for a great OS!
October 31, 2025Oct 31 I updated from RC2 to 7.2.0 and everything is working fine.But the GUI is still slow... or is that normal?RyzenServer_Tools - Google Chrome 2025-10-31 15-19-02.mp4
October 31, 2025Oct 31 I just upgrading from 7.1.4 to 7.2.0Upgrade went well. Only bug I have is that all my containers are missing from docker. Any clue on what to do to restore them ?
October 31, 2025Oct 31 Uneventful upgrade from 7.1.4 to 7.2.0. That's rather boring yet the type of boredom I like.Thank you for the great job
October 31, 2025Oct 31 Author 38 minutes ago, PoMpIs said:I updated from RC2 to 7.2.0 and everything is working fine.But the GUI is still slow... or is that normal?Not at all. But this announce thread is not good for support, please start a new thread under General Support and be sure to include your diagnostics.
October 31, 2025Oct 31 Author 32 minutes ago, platouche said:Upgrade went well. Only bug I have is that all my containers are missing from docker. Any clue on what to do to restore them ?This announce thread is not good for support, please start a new thread under General Support and be sure to include your diagnostics.
October 31, 2025Oct 31 Quick question, since i noticed it only by chance now, does this message "1280 stripes (7 disks)" include the not-assigned 2nd parity disk?Otherwise it seems like the math doesnt math
October 31, 2025Oct 31 How can I resolve the color inconsistency issue? I've removed the CSS and theme engine, but the problem persists.This problem has existed since version 7.1.0. Could you tell me how to solve it, or teach me how to change the theme color? Edited October 31, 2025Oct 31 by laoban
October 31, 2025Oct 31 7 minutes ago, Mainfrezzer said:include the not-assigned 2nd parity disk?Correct, both parity disks are included in that, even if none is assigned.
October 31, 2025Oct 31 Author 16 minutes ago, laoban said:How can I resolve the color inconsistency issue? I've removed the CSS and theme engine, but the problem persists.This problem has existed since version 7.1.0. Could you tell me how to solve it, or teach me how to change the theme color?I'm not clear what the issue is, but it sounds like something that is going to take some back and forth. Please start a new topic in General Support to discuss this, thanks!
October 31, 2025Oct 31 Very sluggish. especially docker and the containers does not seem to have internet access. i have custom network.After 2 restarts i got network access for the dockets for a day or so. Now it is back to no network/internet access.I have had 0 problems for over a year. so something has messed things up. scary when it works for a day and then not Edited November 1, 2025Nov 1 by joggs
October 31, 2025Oct 31 Author 22 minutes ago, joggs said:Very sluggish. especially docker and the containers does not seem to have internet access.Not normal, please start a new thread in General Support and include your diagnostics
October 31, 2025Oct 31 Kernel Panic for me ....mce: CPUs not responding to MCE broadcast (may include false positive): 0,6mce: CPUs not responding to MCE broadcast (may include false positive): 0,6Kernel panic - not syncing: Timeout : Not all CPUs entered broadcast exception handlerShutting down cpus with NMI Edited October 31, 2025Oct 31 by NY152
October 31, 2025Oct 31 Most things seem to have updated smoothly.Unfortunately, it seems I'm no longer able to bind dockers to networks properly (eth0/eth3 both disappeared, VLANs still show). Nothing in the release notes prepared me for this, and I can't find any settings yet to resolve.Topic for this issue:https://forums.unraid.net/topic/194672-unable-to-bind-docker-to-custom-interface-eth0-after-72-upgrade/ Edited October 31, 2025Oct 31 by _cjd_
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.