June 15, 201610 yr I just finally got it to work myself. I had to blow away my docker image, cleaned out all unused and unifi templates. Created a new docker image, installed the unifi docker and worked on first try.
June 15, 201610 yr i'm on 5.0.7 and the docker keeps telling me there is an update? This is an unRAID beta bug.
June 17, 201610 yr pducharme, I just notice this while trying to install your Unifi Docker: docker: layers from manifest don't match image configuration. Any thoughts on how to resolve this? Thank you!
June 18, 201610 yr I am unable to add any new devices via the set-inform command. https://www.dropbox.com/s/e41vtzda59tkh6u/Screenshot%202016-06-17%2023.07.20.png?dl=0 i am using "set-inform http://172.16.10.26:8086/inform" is this wrong?
June 18, 201610 yr Author Yes, do not use the Internal IP of the docker, but the IP of your Unraid host instead. (ie. 192.168.x.x and not 172.16.10.26)
June 18, 201610 yr Thanks for the response. 172.16.10.26 is the IP address of my Unraid Host. 172.16.10.10 is the ip address of my UAP AC Pro. https://www.dropbox.com/s/j6mxls8294hlwra/Screenshot%202016-06-18%2015.00.43.png?dl=0 https://www.dropbox.com/s/4p0x04usfx8p5ub/Screenshot%202016-06-18%2015.00.51.png?dl=0 Thanks in advance!!
June 29, 201610 yr Does UniFi-Video Controller (NVR) Docker essentially replace the need to have a physical NVR in your home? I was looking into some of their cameras, but the NVR they sell is quite expensive. It would be nice to replicate that on my UnRaid Server. Yes, that's the point of running this docker. No need for their physical NVR at all, it achieve the same. Yeah, I'm going to have to do this. I imagine you all would limit NVR storage to a single disk to prevent multiple disks from having to constantly spin up?
August 16, 201610 yr Hello, what is the current version of the Unifi docker? I was using 5.0.7 on my PC until I rebuilt my unRAID server and I'm unable to restore a backup due to the version mismatch. Thanks
August 24, 201610 yr Just wanted to check in and see if there were plans to update the unifi wifi and unifi video dockers to the latest versions?
August 29, 201610 yr Author Ok, UniFi Video docker updated to 3.4.0 (latest). The UniFi docker is already at the latest 5.0.7 version since a while.
August 30, 201610 yr Anyone have a fix for this. I only get the login screen. I get not prompts to setup a user and password. I finally got it working by enter an email as the username.
September 1, 201610 yr Pducharme, I have installed the Unifi Video container and set it up. I am trying to view a live feed from within Unifi Video but I am having port issues. I have forwarded the ports used by the container to my Unraid IP address, but I still have no luck. Also, within the Unifi Video container it reports the UVC's IP address to be 172.17.0.10. Which IP address should I forward these ports to? I have tried both and nothing seems to work. I can view the feed if I log into the camera directly using its IP address. Solved: I ended up having to switch the container to host instead of bridge. Then I had to unmanage the camera and restart the container. Once restarted I logged back in and adopted the camera again. This allowed me to view the camera's feed from within the Unifi Video container. Hope this helps anyone with similar issues. I also had all ports used by the container (7443,7445,7446,7447,7080,6666,22) forwarded to my Unraid's IP address.
September 20, 201610 yr Wanted to let you know that 5.2.7 has been released https://community.ubnt.com/t5/UniFi-Updates-Blog/UniFi-5-2-7-is-released/ba-p/1680663
September 20, 201610 yr Wanted to let you know that 5.2.7 has been released https://community.ubnt.com/t5/UniFi-Updates-Blog/UniFi-5-2-7-is-released/ba-p/1680663 And now unifi finally support auto backup
October 7, 201610 yr Author Hi guys, I just updated my docker to UniFi 5.2.9 released monday. Always backup your current settings before upgrading then at first launch, restore the backup from the wizard.
October 14, 201610 yr Hi guys, I just updated my docker to UniFi 5.2.9 released monday. Always backup your current settings before upgrading then at first launch, restore the backup from the wizard. yep, i forgot to do this.. that was a fun one trying to figure out what was going on at 2 am the other day. haha
October 15, 201610 yr What's the username/pass for the Unifi video docker? Edit: I don't see any system.properties file created Edit 2: Here is the docker log: http://hastebin.com/hujaxiluxu.vbs
October 19, 201610 yr I am getting the following when trying to install. Any suggestions? Pulling image: pducharme/unifi-video-controller:latest IMAGE ID [latest]: Pulling from pducharme/unifi-video-controller. IMAGE ID [6ffe5d2d6a97]: Already exists. IMAGE ID [f4e00f994fd4]: Already exists. IMAGE ID [e99f3d1fc87b]: Already exists. IMAGE ID [a3ed95caeb02]: Already exists. IMAGE ID [ededd75b6753]: Already exists. IMAGE ID [1ddde157dd31]: Already exists. IMAGE ID [5851290e7315]: Pulling fs layer. Download complete. Extracting. Pull complete. IMAGE ID [ace1c0154b69]: Pulling fs layer. Downloading 100% of 22 MB. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [65f6e3b332e9]: Pulling fs layer. Downloading 100% of 929 KB. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [a45914d79836]: Pulling fs layer. Downloading 100% of 772 B. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [fa2e1f43e6f8]: Pulling fs layer. Downloading 100% of 13 KB. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [4e6520aae5dc]: Pulling fs layer. Downloading 100% of 15 KB. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [b2c8e7aaede9]: Pulling fs layer. Downloading 100% of 45 MB. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [fc21329cfd66]: Pulling fs layer. Downloading 100% of 137 MB. Download complete. Extracting. Pull complete. IMAGE ID [26222c8ac9bd]: Pulling fs layer. Downloading 100% of 78 MB. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [dbe54fa0bbc0]: Pulling fs layer. Downloading 100% of 80 MB. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [208a7f0d29e7]: Pulling fs layer. Downloading 100% of 421 B. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [564e9fd55734]: Pulling fs layer. Downloading 100% of 420 B. Verifying Checksum. Download complete. Extracting. Pull complete. TOTAL DATA PULLED: 363 MB Error: layers from manifest don't match image configuration
October 19, 201610 yr Error: layers from manifest don't match image configuration Theres an entry in the docker FAQ about that message
November 5, 201610 yr durr....thanks Can you give the link to where I can fix this error? I am reading the Docker FAQ, but have not found the actual solution to resolve this error.
November 5, 201610 yr Ok I found the FAQ where it says to delete the docker.img and recreate it and then reinstall the app throught the Community Application's Previous Apps section. This is Greek to me since I have not touch Docker in a long time. Can someone point me to how to delete the docker.img? Do I do it at the command line? Edit: Never mind, I found in the release notes how to go about fixing the problem. Thanks.
November 5, 201610 yr So I upgraded unRAID from V6.1.9 to 6.2.3. Then I deleted the docker.img and reinstall UniFi from the Community App Previous Apps. Now I have the newest Unifi running, but all my settings were lost. Can someone verify that all host port docker settings are the same between Unifi V 5.07 and 5.2.9? My main problem is that my AP is on a different subnet and now the controller cannot detect it. With the previous version, the controller was able to detect my AP on the different subnet. I do have the DHCP option 43 to inform the AP that the controller is on my unRAID server IP. I can't understand why my controller does not detect my AP. Do I need to reboot my AP?
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.