Bungy Posted April 10, 2017 Author Share Posted April 10, 2017 The docker is still supported, just my time for support is now more limited. Can you post your full config? My guess is that there is a parameter that isn't set. Likely the parameter for the LAN_NETWORK. If you're used to looking at docker-compose setups, here's my config. You can probably easily tell which environmental variables you'll need to change to get it to work. nzbget: restart: always image: jshridha/docker-nzbgetvpn privileged: true volumes: - /mnt/disks/external/Downloads:/data - /mnt/disks/external/appdata/nzbgetvpn/config:/config - /etc/localtime:/etc/localtime environment: - VPN_ENABLED=yes - VPN_USER=USERNAME - VPN_PASS=PASSWORD - VPN_REMOTE=us-east.privateinternetaccess.com - VPN_PORT=1198 - VPN_PROV=pia - VPN_PROTOCOL=udp - ENABLE_PRIVOXY=no - LAN_NETWORK=192.168.1.0/24 - STRONG_CERTS=no ports: - "6789:6789" Quote Link to comment
trurl Posted April 11, 2017 Share Posted April 11, 2017 13 hours ago, Bungy said: My guess is that there is a parameter that isn't set. Likely the parameter for the LAN_NETWORK. Apparently he hasn't set much of anything. 2 minutes ago, Mylo75 said: Thanks My Settings are Do you have any other working dockers? Quote Link to comment
Mylo75 Posted April 11, 2017 Share Posted April 11, 2017 See pics attached as previous post didn't post correctly. Quote Link to comment
Bungy Posted April 11, 2017 Author Share Posted April 11, 2017 What is your LAN network IP address and subnet mask?Also try adding in the parameter:ENABLE_PRIVOXY=noSent from my Nexus 5X using Tapatalk Quote Link to comment
Mylo75 Posted April 11, 2017 Share Posted April 11, 2017 (edited) You mean my "tower" ip address, or default gateway Network mask: 255.255.255.0 Edited April 11, 2017 by Mylo75 Quote Link to comment
Bungy Posted April 11, 2017 Author Share Posted April 11, 2017 Either one will work, so let's go with tower ip address Sent from my Nexus 5X using Tapatalk Quote Link to comment
Bungy Posted April 11, 2017 Author Share Posted April 11, 2017 Try changing the VPN address to uk-london.privateinternetaccess.comSent from my Nexus 5X using Tapatalk Quote Link to comment
Mylo75 Posted April 11, 2017 Share Posted April 11, 2017 No joy. This is from the nzbgetvpn log 2017-04-11 14:54:50,226 DEBG 'start-script' stdout output:-P INPUT DROP-P FORWARD ACCEPT-P OUTPUT DROP-A INPUT -i tun0 -j ACCEPT-A INPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT-A INPUT -i eth0 -p udp -m udp --sport 1198 -j ACCEPT-A INPUT -i eth0 -p tcp -m tcp --dport 6789 -j ACCEPT-A INPUT -i eth0 -p tcp -m tcp --sport 6789 -j ACCEPT-A INPUT -s 192.168.1.0/24 -i eth0 -p tcp -m tcp --dport 58846 -j ACCEPT-A INPUT -p udp -m udp --sport 53 -j ACCEPT-A INPUT -p icmp -m icmp --icmp-type 0 -j ACCEPT-A INPUT -i lo -j ACCEPT-A OUTPUT -o tun0 -j ACCEPT-A OUTPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT-A OUTPUT -o eth0 -p udp -m udp --dport 1198 -j ACCEPT-A OUTPUT -o eth0 -p tcp -m tcp --dport 6789 -j ACCEPT-A OUTPUT -o eth0 -p tcp -m tcp --sport 6789 -j ACCEPT-A OUTPUT -d 192.168.1.0/24 -o eth0 -p tcp -m tcp --sport 58846 -j ACCEPT-A OUTPUT -p udp -m udp --dport 53 -j ACCEPT-A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT-A OUTPUT -o lo -j ACCEPT2017-04-11 14:54:50,226 DEBG 'start-script' stdout output:--------------------[info] Starting OpenVPN...2017-04-11 14:54:50,231 DEBG 'start-script' stdout output:Tue Apr 11 14:54:50 2017 OpenVPN 2.3.11 x86_64-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [EPOLL] [MH] [IPv6] built on May 12 2016Tue Apr 11 14:54:50 2017 library versions: OpenSSL 1.0.2h 3 May 2016, LZO 2.09Tue Apr 11 14:54:50 2017 WARNING: file 'credentials.conf' is group or others accessible2017-04-11 14:54:50,252 DEBG 'start-script' stdout output:Tue Apr 11 14:54:50 2017 UDPv4 link local: [undef]Tue Apr 11 14:54:50 2017 UDPv4 link remote: [AF_INET]213.120.234.114:11982017-04-11 14:54:51,253 INFO success: nzbget entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) Quote Link to comment
Bungy Posted April 11, 2017 Author Share Posted April 11, 2017 I'm out of ideas. Can you get me remote access to your server and I'll dig into it more? A ssh terminal, TeamViewer, gotomeeting, or something like that will work. Ssh terminal is preferred.Sent from my Nexus 5X using Tapatalk Quote Link to comment
Mylo75 Posted April 11, 2017 Share Posted April 11, 2017 Thanks Bungy, I'll have another bash at it myself (it's a good way for me to learn all this stuff), if I'm still having problems I'll get back to you. Cheers. Quote Link to comment
amigenius Posted May 5, 2017 Share Posted May 5, 2017 Hi, I've updated from unRaid 6.1.9 to 6.3.3 and updated also the docker images. Now my ssh keys aren't accepted anymore from the gitlab docker. I've tracked down the issue so far. The problem is the .ssh symbolic link in /home/git. In /var/log/gitlab/supervisor/sshd.log i've found Authentication refused: bad ownership or modes for directory /home/git/data Permissions of the data folder are 777 99:users If i rename the .ssh symlink and create a real .ssh folder and put authorised_keys in it and set all file permissions correctly, ssh auth with public key works again. Problem with this fix is, that when the docker gets updated, i must do this changes again. So how can we fix this better? cya Quote Link to comment
thegeneral Posted May 17, 2017 Share Posted May 17, 2017 Installed this today getting this error when i enabled the external storage plugin External Storage Note: "smbclient" is not installed. Mounting of SMB / CIFS, SMB / CIFS using OC login is not possible. Please ask your system Quote Link to comment
Bungy Posted May 17, 2017 Author Share Posted May 17, 2017 This seems to be an issue to take up with the official owncloud team for their docker image. I only wrote the template and not the container. Alternatively, you can use these commands to install smbclient: docker exec -it owncloud bash apt-get update apt-get install -y smbclient exit Keep in mind that your apps will disappear unless you manually persist their storage on your unraid server. Also, the above commands will have to be re-done every time you recreate the container. The owncloud container wasn't designed to use the external storages plugin. I'd suggest you use docker volume mapping instead to provide similar functionality. Quote Link to comment
Bungy Posted May 17, 2017 Author Share Posted May 17, 2017 On 5/5/2017 at 1:21 PM, amigenius said: Hi, I've updated from unRaid 6.1.9 to 6.3.3 and updated also the docker images. Now my ssh keys aren't accepted anymore from the gitlab docker. I've tracked down the issue so far. The problem is the .ssh symbolic link in /home/git. In /var/log/gitlab/supervisor/sshd.log i've found Authentication refused: bad ownership or modes for directory /home/git/data Permissions of the data folder are 777 99:users If i rename the .ssh symlink and create a real .ssh folder and put authorised_keys in it and set all file permissions correctly, ssh auth with public key works again. Problem with this fix is, that when the docker gets updated, i must do this changes again. So how can we fix this better? cya The problem isn't the upgrad to unraid. The problem is you recreated the container so the /home/git/data directory is now missing. It seems your config is missing the directory mapping for /home/git/data. You'll have to manually map /home/git/data in the container to /mnt/user/appdata/gitlab on the host for example to get persistent storage to work. The template should have handled that for you, but maybe you changed the default settings? Quote Link to comment
Levente Posted May 22, 2017 Share Posted May 22, 2017 (edited) Hi, I'm a first time user of Unraid and docker. I have installed your owncloud docker but I am wondering if there is a way to make the files and folders uploaded/created via the interface to be modified from an Unraid share? At the moment the ownership of the files and folders are to sshd:sshd. I apologise if this is a dumb question. Levi EDIT: I managed to figure it out. Edited May 22, 2017 by Levente Problem solved Quote Link to comment
amigenius Posted May 22, 2017 Share Posted May 22, 2017 On 17.5.2017 at 4:26 AM, Bungy said: The problem isn't the upgrad to unraid. The problem is you recreated the container so the /home/git/data directory is now missing. It seems your config is missing the directory mapping for /home/git/data. You'll have to manually map /home/git/data in the container to /mnt/user/appdata/gitlab on the host for example to get persistent storage to work. The template should have handled that for you, but maybe you changed the default settings? Hi, nope, that's not the reason. /home/git/data is mapped. cya Quote Link to comment
davids2115 Posted May 27, 2017 Share Posted May 27, 2017 Good morning. Have been using this docker for a while, Receiving this error after an update: /usr/bin/nzbget: error while loading shared libraries: libssl.so.1.1: cannot open shared object file: No such file or directory Can no longer connect. Thx Quote Link to comment
jedimstr Posted May 27, 2017 Share Posted May 27, 2017 1 hour ago, davids2115 said: Good morning. Have been using this docker for a while, Receiving this error after an update: /usr/bin/nzbget: error while loading shared libraries: libssl.so.1.1: cannot open shared object file: No such file or directory Can no longer connect. Thx Getting the same error in the nzbgetvpn log as well. Just started this morning after the unRAID 6.3.5 upgrade. Along with the log error, the webGUI for nzbget gets a connection refused. Docker shows the container running. Other containers using VPN to PIA are working fine like activ-transmissionvpn so it's just isolated to nzbgetvpn. Quote Link to comment
WhiteNoseThunderPants Posted May 28, 2017 Share Posted May 28, 2017 It is not related to the 6.3.5 update because I have not updated to that version but I am receiving the same error with nzbgetvpn. Quote Link to comment
jedimstr Posted May 28, 2017 Share Posted May 28, 2017 (edited) 4 hours ago, WhiteNoseThunderPants said: It is not related to the 6.3.5 update because I have not updated to that version but I am receiving the same error with nzbgetvpn. Oh well... coincidental timing then. Still an issue, so I setup the binhex SABnzbd VPN container in the meantime. I prefered the more efficient C++ implementation in NZBget to the Python based SABnzbd, but the latest version 2.01 seems better than the older ones I've tried before and I don't want to download from usenet newsgroups without VPN so, SABnzbd it is for now. Edited May 28, 2017 by jedimstr Quote Link to comment
jedimstr Posted May 31, 2017 Share Posted May 31, 2017 And... looks like an update of the container fixed it today. Github doesn't show any commits/releases though. Quote Link to comment
Bungy Posted May 31, 2017 Author Share Posted May 31, 2017 39 minutes ago, jedimstr said: And... looks like an update of the container fixed it today. Github doesn't show any commits/releases though. I pushed a new commit that fixed the issue yesterday. Feel free to post here or on the github issue if you have any more problems. Quote Link to comment
jedimstr Posted June 3, 2017 Share Posted June 3, 2017 (edited) On 5/30/2017 at 9:03 PM, Bungy said: I pushed a new commit that fixed the issue yesterday. Feel free to post here or on the github issue if you have any more problems. Thanks Bungy!!! Looks like the source you're using is a version behind. Your repo has 18.0 while the latest stable release from April is 18.1 (changelog: https://github.com/nzbget/nzbget/releases/tag/v18.1) The 19.x test versions are coming along nicely too, so don't know if you'd want to wait for that to update your container version. Edited June 3, 2017 by jedimstr Quote Link to comment
Bungy Posted June 3, 2017 Author Share Posted June 3, 2017 2 minutes ago, jedimstr said: Thanks Bungy!!! Looks like the source you're using is a version behind. Your repo has 18.0 while the latest stable release from April is 18.1 (changelog: https://github.com/nzbget/nzbget/releases/tag/v18.1) The 19.x test versions are coming along nicely too, so don't know if you'd want to wait for that to update your container version. My goal is to update to 18.1. However, this requires an update to openssl libraries, which ends up breaking lots of binaries that require the older openssl version. I haven't had the time to sort out all the packages required to update, but I'll take a look again shortly. Keep poking me because I may forget! Quote Link to comment
Bungy Posted June 26, 2017 Author Share Posted June 26, 2017 On 6/3/2017 at 2:44 PM, Bungy said: My goal is to update to 18.1. However, this requires an update to openssl libraries, which ends up breaking lots of binaries that require the older openssl version. I haven't had the time to sort out all the packages required to update, but I'll take a look again shortly. Keep poking me because I may forget! Build with version 18.1 is up and running. I'll update to 19.0 as soon as it hits the arch repository. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.