16 minutes ago, interwebtech said:

Yes please. 

+1

Mobile Update

 

Threw up the trial balloon just to see if I should go through the exercise.  After a good solid 12 hours at this, determined that it is effectively unworkable because I'm running on top of an interface (dynamix) that isn't mobile aware.  While I can easily change the styling of the cards for a mobile device to make them readable on a 5" screen, I cannot change the styling of everything else within unRaid that CA utilizes.  Effectively that means that no matter what it winds up being only a solution that is "half-assed", and will not be able to avoid having to zoom in on everything (or a complete rewrite of CA to not use any built-in functions).

 

That being said, the exercise wasn't a complete waste of time.  Certain aspects of CA's UI are going to change to make it more mobile friendly that aren't going to impact the desktop version

Sorting options don't appear to be working for me.

 

Typically for example if I go to "All Apps" by default it sorts A-Z, if I try changing that to anything else the loading icon appears/disappears but then nothing happens, stays as A-Z.

Have tried with Adblocking off and have tried Incognito to try and make sure it wasn't some browser problems, any other suggestions?

Yeah, I know.   Regression error I found a couple of days ago.   Already fixed and will be released on the next maintenance release

Fixed on today's release

Thanks Squid! Awesome stuff

@Squid I can't search using dashes for some reason. If i try to search docker hub for "go-socks5-proxy" it changes it to "go socks5 proxy" causing it to load thousands of pages making it impossible to find. 

Edited December 6, 20196 yr by jrdnlc

I'm trying to install this plugin, but I am getting a network error. 

 

plugin: installing: https://raw.githubusercontent.com/Squidly271/community.applications/master/plugins/community.applications.plg
plugin: downloading https://raw.githubusercontent.com/Squidly271/community.applications/master/plugins/community.applications.plg
plugin: downloading: https://raw.githubusercontent.com/Squidly271/community.applications/master/plugins/community.applications.plg ... failed (Network failure)
plugin: wget: https://raw.githubusercontent.com/Squidly271/community.applications/master/plugins/community.applications.plg download failure (Network failure)

 

Pinging 8.8.8.8 is successful. Can anybody help?

Probably your gateway isn't correct.  Set it to the IP address of your router

On 12/6/2019 at 6:18 PM, davis3924 said:

I'm trying to install this plugin, but I am getting a network error. 

 

plugin: installing: https://raw.githubusercontent.com/Squidly271/community.applications/master/plugins/community.applications.plg
plugin: downloading https://raw.githubusercontent.com/Squidly271/community.applications/master/plugins/community.applications.plg
plugin: downloading: https://raw.githubusercontent.com/Squidly271/community.applications/master/plugins/community.applications.plg ... failed (Network failure)
plugin: wget: https://raw.githubusercontent.com/Squidly271/community.applications/master/plugins/community.applications.plg download failure (Network failure)

 

Pinging 8.8.8.8 is successful. Can anybody help?

I'm getting a similar errors that https://raw.githubusercontent.com/Squidly271 doesn't exist when I try to navigate in Chrome but I can access https://raw.githubusercontent.com/ without issues.

If it's a Network Failure, then it's either DNS addresses or Gateway address that is wrong / typo'd etc.

5 hours ago, Primal51 said:

I'm getting a similar errors that https://raw.githubusercontent.com/Squidly271 doesn't exist when I try to navigate in Chrome but I can access https://raw.githubusercontent.com/ without issues.

I'm getting the same error all of a sudden as well.  My Apps tab has disappeared after the failed update, also.

2 minutes ago, lldalastdon said:

same error

The exact same error (ie: Network Failure)?

 

The link in @Primal51's post is 100% correct

 

If clicking the link from Chrome doesn't bring up the raw .plg then you've got other issues with your router / modem / isp / Country that is outside of what I am in control of.

 

Thus far though with 3 separate users saying "same error" which leads me to read that as "Network Failure", no one has responded with requests for diagnostics, or if their Gateway / DNS addresses weren't typo'd

 

On 12/6/2019 at 12:49 AM, jrdnlc said:

@Squid I can't search using dashes for some reason. If i try to search docker hub for "go-socks5-proxy" it changes it to "go socks5 proxy" causing it to load thousands of pages making it impossible to find. 

There was a reason for that.  Of course since that code was done a few years ago, I can't remember what the reason actually was

 

OK, After some testing, I'll allow dashes in searches, and anything non alphanumeric will get switched to a space.

26 minutes ago, Squid said:

The exact same error (ie: Network Failure)?

 

The link in @Primal51's post is 100% correct

 

If clicking the link from Chrome doesn't bring up the raw .plg then you've got other issues with your router / modem / isp / Country that is outside of what I am in control of.

 

Thus far though with 3 separate users saying "same error" which leads me to read that as "Network Failure", no one has responded with requests for diagnostics, or if their Gateway / DNS addresses weren't typo'd

 

Sorry, yes its saying network failure.  The error with updating is attached. I've noticed I can download it via CLI in unraid as well as clicking the link in Chrome.  Not sure what's going on.

 

 

Edited December 8, 20196 yr by lldalastdon

1 minute ago, lldalastdon said:

Sorry, yes its saying network failure. 

I think you mean Generic Error

 

Post the diagnostics

6 minutes ago, Squid said:

I think you mean Generic Error

 

Post the diagnostics

Yes, you are correct.  I meant generic error.  Is there any place I can find a more detailed error?

10 minutes ago, lldalastdon said:

Is there any place I can find a more detailed error?

It's in the diagnostics, although not explicitly in "English" 

1 hour ago, Squid said:

OK, After some testing, I'll allow dashes in searches, and anything non alphanumeric will get switched to a space.

Excellent! Thanks for looking in to it

27 minutes ago, Squid said:

It's in the diagnostics, although not explicitly in "English" 

Hrmm.  Looks like I am unable to install/update any plugins.  When trying to install a new plugin I am getting Read-only file system errors.  I'm wondering if one of my drive have failed.

3 hours ago, lldalastdon said:

Hrmm.  Looks like I am unable to install/update any plugins.  When trying to install a new plugin I am getting Read-only file system errors.  I'm wondering if one of my drive have failed.

For everyone, I was able to fix the issue.  My USB boot drive got corrupted.  I had to replace it.  Once replaced, all worked fine.

Hey everyone,

   New to unraid, just installed the trial and am trying to install the CA plugin.  Aside from the initial install, I've only created my pool and cache.  I haven't "tweaked" anything but I must have done something wrong somewhere along the line as I am getting a network error when trying to install the plugin

 

Using this url: https://raw.githubusercontent.com/Squidly271/community.applications/master/plugins/community.applications.plg

 

I get this:

plugin: installing: https://raw.githubusercontent.com/Squidly271/community.applications/master/plugins/community.applications.plg
plugin: downloading https://raw.githubusercontent.com/Squidly271/community.applications/master/plugins/community.applications.plg
plugin: downloading: https://raw.githubusercontent.com/Squidly271/community.applications/master/plugins/community.applications.plg ... failed (Network failure)
plugin: wget: https://raw.githubusercontent.com/Squidly271/community.applications/master/plugins/community.applications.plg download failure (Network failure)

 

Everything I see network wise works fine...but as I'm new to unraid, I really don't know what "fine" should be. 

Any help would be greatly appreciated.  I've attached the diagnostics.

Thanks!

media1-diagnostics-20191219-1145.zip

5 minutes ago, broncosaddict said:

I've attached the diagnostics.

Not the problem you're asking about, but you are having issues with multiple disks, likely a controller problem or possibly power.

 

Dec 18 10:55:54 media1 kernel: sas: ata5: end_device-1:0:18: cmd error handler
Dec 18 10:55:54 media1 kernel: sas: ata5: end_device-1:0:18: dev error handler
Dec 18 10:55:54 media1 kernel: sas: ata6: end_device-1:0:19: dev error handler
Dec 18 10:55:54 media1 kernel: sas: ata7: end_device-1:0:20: dev error handler
Dec 18 10:55:54 media1 kernel: sas: ata8: end_device-1:0:21: dev error handler
Dec 18 10:55:54 media1 kernel: sas: ata9: end_device-1:0:22: dev error handler
Dec 18 10:55:54 media1 kernel: sas: ata10: end_device-1:0:23: dev error handler
Dec 18 10:55:54 media1 kernel: sas: ata11: end_device-1:0:24: dev error handler
Dec 18 10:55:54 media1 kernel: sas: ata12: end_device-1:0:27: dev error handler
Dec 18 10:55:54 media1 kernel: sas: ata13: end_device-1:0:28: dev error handler
Dec 18 10:55:54 media1 kernel: sas: ata14: end_device-1:0:29: dev error handler

 

Thanks, I will look at it.  I wasn't sure if my old controller would work or not, but I saw healthy/online on the dashboard and thought everything was good so didn't look any further.   Once I get this plugin problem resolved, I will try swapping the controller out and see if that resolves the issue.  

Thanks again for pointing that out.