sniper Posted July 5, 2016 Share Posted July 5, 2016 CouchPotato refuse to connect to deluge torrent client But connect to most of torrent client It said check log but the logs empty ! Quote Link to comment
roland Posted July 5, 2016 Share Posted July 5, 2016 I had the same problem. See the support thread for binhex's deluge vpn docker, he explained how to connect the two. Worked for me. Quote Link to comment
CHBMB Posted July 5, 2016 Share Posted July 5, 2016 (edited) On 05/07/2016 at 8:53 AM, sniper said: Did not work !! sniper it's very helpful if you post a bit more detail about what you've already tried as it's a bit difficult to help someone if that's all they post. The more detail you put in the less work we have to do, don't forget we're all unpaid volunteers here. Imagine taking your car to a mechanic and saying "It doesn't work" Would you expect him to be able to tell you what was wrong? Just tested it and it works for me on a new setup of both First do this. Then edit your deluge preferences to allow remote connections. Then input the details in couch potato. user password unraid-ip-address:58846 Edited February 18, 2018 by CHBMB Quote Link to comment
sniper Posted July 5, 2016 Share Posted July 5, 2016 Did not work !! sniper it's very helpful if you post a bit more detail about what you've already tried as it's a bit difficult to help someone if that's all they post. The more detail you put in the less work we have to do, don't forget we're all unpaid volunteers here. Imagine taking your car to a mechanic and saying "It doesn't work" Would you expect him to be able to tell you what was wrong? Just tested it and it works for me on a new setup of both First do this. Then edit your deluge preferences to allow remote connections. Then input the details in couch potato. user password unraid-ip-address:58846 Thanks CHBMB It did work Before i did edit deluge auth file with <admin username>:<admin password>:10 Did not work With your line it does work Thanks a lot Quote Link to comment
captainnapalm Posted July 5, 2016 Share Posted July 5, 2016 Did not work !! sniper it's very helpful if you post a bit more detail about what you've already tried as it's a bit difficult to help someone if that's all they post. The more detail you put in the less work we have to do, don't forget we're all unpaid volunteers here. Imagine taking your car to a mechanic and saying "It doesn't work" Would you expect him to be able to tell you what was wrong? Just tested it and it works for me on a new setup of both First do this. Then edit your deluge preferences to allow remote connections. Then input the details in couch potato. user password unraid-ip-address:58846 Thanks CHBMB It did work Before i did edit deluge auth file with <admin username>:<admin password>:10 Did not work With your line it does work Thanks a lot sniper, I believe the intent of "<admin username>:<admin password>:10" is that you replace those lines with something more appropriate for your setup. I'm guessing the reason it worked this time is because you put "admin:password:10" in the auth file. Replacing these with hello:world:10 would also work just as well, where "hello" would be the username, and "world" would be the password. Glad you got it connected though! Quote Link to comment
CHBMB Posted July 5, 2016 Share Posted July 5, 2016 sniper, I believe the intent of "<admin username>:<admin password>:10" is that you replace those lines with something more appropriate for your setup. I'm guessing the reason it worked this time is because you put "admin:password:10" in the auth file. Replacing these with hello:world:10 would also work just as well, where "hello" would be the username, and "world" would be the password. Glad you got it connected though! That screenshot was mine just demonstrating it working not snipers, good bit of advice though. Quote Link to comment
afc Posted July 18, 2016 Share Posted July 18, 2016 Hi I am trying to install the CP Docker image but I get an error when installing https://db.tt/XMguw8Sa I used to have a CP installation but I deleted the appdata folder and create a new one!! Why I can't install this docker?? Quote Link to comment
CHBMB Posted July 18, 2016 Share Posted July 18, 2016 This is a bug in Unraid, fixed in the latest beta. Delete docker.img and recreate it, then download your docker containers again. It's not an issue with CouchPotato. Sent from my LG-H815 using Tapatalk Quote Link to comment
j0nnymoe Posted August 8, 2016 Share Posted August 8, 2016 This docker has been rebased to alpine with s6 overlay, please make sure you backup your appdata first before you update to this latest image. For more information, please read : http://lime-technology.com/forum/index.php?topic=50793.0 Quote Link to comment
morbidpete Posted August 10, 2016 Share Posted August 10, 2016 I'm guessing that the IMDB changed some things around. Cp gives me this when I try to add a movie 08-10 16:30:55 ERROR [to.core.media.movie._base] Can't add movie without imdb identifier. Only noticed because plex request is giving a similar error so I tried CP directly. Should I post this to the Github as an issue? Quote Link to comment
Soup Posted August 11, 2016 Share Posted August 11, 2016 This docker has been rebased to alpine with s6 overlay, please make sure you backup your appdata first before you update to this latest image. For more information, please read : http://lime-technology.com/forum/index.php?topic=50793.0 Possibly a stupid question, but how do I go about updating? Current Container ID: 52ae973bcbfe Showing "up to date" now Quote Link to comment
j0nnymoe Posted August 11, 2016 Share Posted August 11, 2016 This docker has been rebased to alpine with s6 overlay, please make sure you backup your appdata first before you update to this latest image. For more information, please read : http://lime-technology.com/forum/index.php?topic=50793.0 Possibly a stupid question, but how do I go about updating? Current Container ID: 52ae973bcbfe Showing "up to date" now You will need to force the update, open the advanced view and click "force update" Sent from my Nexus 6 using Tapatalk Quote Link to comment
SyphonxZA Posted August 17, 2016 Share Posted August 17, 2016 Hey, I've been trying to install CP for the first time today but having some issues. I used the following command: sudo docker run -d -v ~/.docker-couchpotato-config:/config -v ~/Downloads:/data -v ~/Downloads/.Movies:/movies -e PGID=1000 -e PUID=1000 -p 8082:8082 --name couchpotato linuxserver/couchpotato I'm unable to access the webgui at all, I have also tried -p 5050:5050 and without PGID or PUID but it isn't loading, the container is running though. I got Sonarr and SAB working with very similar settings. The logs of CP show: server@server:~$ sudo docker logs -f couchpotato [s6-init] making user provided files available at /var/run/s6/etc...exited 0. [s6-init] ensuring user provided files have correct perms...exited 0. [fix-attrs.d] applying ownership & permissions fixes... [fix-attrs.d] done. [cont-init.d] executing container initialization scripts... [cont-init.d] 10-adduser: executing... ------------------------------------- _ _ _ | |___| (_) ___ | / __| | |/ _ \ | \__ \ | | (_) | |_|___/ |_|\___/ |_| Brought to you by linuxserver.io We do accept donations at: https://www.linuxserver.io/donations ------------------------------------- GID/UID ------------------------------------- User uid: 1000 User gid: 1000 ------------------------------------- [cont-init.d] 10-adduser: exited 0. [cont-init.d] 30-install: executing... Cloning into '/app/couchpotato'... All the containers seems to get stuck at the last line, can anyone point out what I'm doing wrong? Quote Link to comment
mr-hexen Posted August 17, 2016 Share Posted August 17, 2016 Have you waited sufficiently long? Cloning means downloading from GIT and compiling... Quote Link to comment
CHBMB Posted August 17, 2016 Share Posted August 17, 2016 What mr hexen says is correct and furthermore if you stop or restart the container before the initial cloning has completed then it may well fail to start next time. Best thing to do is to delete the appdata share and the docker container and image and start from scratch. Quote Link to comment
SyphonxZA Posted August 17, 2016 Share Posted August 17, 2016 What mr hexen says is correct and furthermore if you stop or restart the container before the initial cloning has completed then it may well fail to start next time. Best thing to do is to delete the appdata share and the docker container and image and start from scratch. Thanks, didn't realise it had to download more data after pulling the image, all working after doing what you suggested. Quote Link to comment
Wob76 Posted September 7, 2016 Share Posted September 7, 2016 Hey all, now that the LS images are not auto updating I was wondering if there any issues with doing in app updates inside the container? Mostly interested in this, sickrage and plexpy, all LS dockers. Thanks, Wob. Sent from my SM-G900I using Tapatalk Quote Link to comment
deuxcolors Posted September 19, 2016 Share Posted September 19, 2016 I'm aware this might be pebkac on my part but... Not sure if it is an issue with CP or with this docker but when I go into the settings > renamer I can select a folder since the top half of the widow that pops up is cut off by CP bar across the top. Quote Link to comment
deuxcolors Posted September 20, 2016 Share Posted September 20, 2016 I figured out how to get around my previous issue, but now when I try to connect CP to Deluge when clicking the test button I get a failed and in the logs I get the following repeatedly: [tato.core.plugins.profile] Failed: Traceback (most recent call last): File "/app/couchpotato/couchpotato/core/plugins/profile/main.py", line 140, in saveOrder p = db.get('id', profile_id) File "/app/couchpotato/libs/CodernityDB/database_super_thread_safe.py", line 43, in _inner res = f(*args, **kwargs) File "/app/couchpotato/libs/CodernityDB/database.py", line 946, in get raise RecordDeleted("Deleted") RecordDeleted: Deleted Any help is appreciated. EDIT: Not sure it is related, but when I restarted CP I got this error: [ couchpotato.core.event] Error in event "app.load", that wasn't caught: Traceback (most recent call last): File "/app/couchpotato/couchpotato/core/event.py", line 15, in runHandler return handler(*args, **kwargs) File "/app/couchpotato/couchpotato/core/media/movie/providers/info/themoviedb.py", line 57, in config languages.remove(self.default_language) ValueError: list.remove(x): x not in list encoding=UTF-8 debug=False args=['--config_file=/config/config.ini', '--data_dir=/config/data'] app_dir=/app/couchpotato data_dir=/config/data desktop=None options=Namespace(config_file='/config/config.ini', console_log=False, daemon=False, data_dir='/config/data', debug=False, pid_file='/config/data/couchpotato.pid', quiet=False) Quote Link to comment
Bizmo Posted September 29, 2016 Share Posted September 29, 2016 Struggling with renamed settings on this one, on my previous mac OS X server I had it set up as Default file action - move Default torrent action - link This way it kept the torrent data for it to seed for the suggested time as it linked the file and then when it was done seeding it deleted the torrent and moved the file. When I have this set up here it just moves the file once it is done downloading meaning I am branded with hit and runs. I'm new to docker and guess this is due to deluge and CP running in different instances? Is there any suggestion to fix this or any way of setting deluge to delete the torrent after x amount of time, just don't want to waste disk space duplicating files. Quote Link to comment
mr-hexen Posted September 29, 2016 Share Posted September 29, 2016 I figured out how to get around my previous issue, but now when I try to connect CP to Deluge when clicking the test button I get a failed and in the logs I get the following repeatedly: [tato.core.plugins.profile] Failed: Traceback (most recent call last): File "/app/couchpotato/couchpotato/core/plugins/profile/main.py", line 140, in saveOrder p = db.get('id', profile_id) File "/app/couchpotato/libs/CodernityDB/database_super_thread_safe.py", line 43, in _inner res = f(*args, **kwargs) File "/app/couchpotato/libs/CodernityDB/database.py", line 946, in get raise RecordDeleted("Deleted") RecordDeleted: Deleted Any help is appreciated. EDIT: Not sure it is related, but when I restarted CP I got this error: [ couchpotato.core.event] Error in event "app.load", that wasn't caught: Traceback (most recent call last): File "/app/couchpotato/couchpotato/core/event.py", line 15, in runHandler return handler(*args, **kwargs) File "/app/couchpotato/couchpotato/core/media/movie/providers/info/themoviedb.py", line 57, in config languages.remove(self.default_language) ValueError: list.remove(x): x not in list encoding=UTF-8 debug=False args=['--config_file=/config/config.ini', '--data_dir=/config/data'] app_dir=/app/couchpotato data_dir=/config/data desktop=None options=Namespace(config_file='/config/config.ini', console_log=False, daemon=False, data_dir='/config/data', debug=False, pid_file='/config/data/couchpotato.pid', quiet=False) I have CP set up to connect to my unraid ip @ the daemon host port in the deluge container. The daemon host port is 58846, make sure you pass that through the docker container config just like 8112 and 8118. You will need to use the username and pass from your auth file as well. For example Quote Link to comment
CHBMB Posted September 29, 2016 Share Posted September 29, 2016 I figured out how to get around my previous issue, but now when I try to connect CP to Deluge when clicking the test button I get a failed and in the logs I get the following repeatedly: [tato.core.plugins.profile] Failed: Traceback (most recent call last): File "/app/couchpotato/couchpotato/core/plugins/profile/main.py", line 140, in saveOrder p = db.get('id', profile_id) File "/app/couchpotato/libs/CodernityDB/database_super_thread_safe.py", line 43, in _inner res = f(*args, **kwargs) File "/app/couchpotato/libs/CodernityDB/database.py", line 946, in get raise RecordDeleted("Deleted") RecordDeleted: Deleted Any help is appreciated. EDIT: Not sure it is related, but when I restarted CP I got this error: [ couchpotato.core.event] Error in event "app.load", that wasn't caught: Traceback (most recent call last): File "/app/couchpotato/couchpotato/core/event.py", line 15, in runHandler return handler(*args, **kwargs) File "/app/couchpotato/couchpotato/core/media/movie/providers/info/themoviedb.py", line 57, in config languages.remove(self.default_language) ValueError: list.remove(x): x not in list encoding=UTF-8 debug=False args=['--config_file=/config/config.ini', '--data_dir=/config/data'] app_dir=/app/couchpotato data_dir=/config/data desktop=None options=Namespace(config_file='/config/config.ini', console_log=False, daemon=False, data_dir='/config/data', debug=False, pid_file='/config/data/couchpotato.pid', quiet=False) I also posted how to do this in the previous page. Quote Link to comment
deuxcolors Posted September 29, 2016 Share Posted September 29, 2016 Yes sorry. I got a reply on reddit and fixed the issue. Completely forgot to come back here and say as much. Sent from my C6833 using Tapatalk Quote Link to comment
Bjonness406 Posted September 29, 2016 Share Posted September 29, 2016 Yes sorry. I got a reply on reddit and fixed the issue. Completely forgot to come back here and say as much. Sent from my C6833 using Tapatalk Post what fixed your issue then? Could be helpfull to other people Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.