Dimtar Posted October 2, 2015 Share Posted October 2, 2015 Has anyone got this working when using PMS with SSL forced? As in PMS will only accept SSL connections to it. Quote Link to comment
ijuarez Posted October 3, 2015 Share Posted October 3, 2015 Recently installed and i can see my media and few basic stats as i just started. However pushbullet is configured but im not getting any notifications when media is played or paused. I do knot see anything in the logs. Any suggestions would be appreciated. Same thing happening here. Tried Pushbullet and NMA and neither sends out notifications. Any ideas? Should have noticed the bell icon at the notification agent settings page to the left of the service. Once I set which notifications I wanted the came right through. my bad I have the bell checked and still get no pushbullet notifications. However all my unraid couch and sickrage get to me just fine. Quote Link to comment
VizeL Posted October 6, 2015 Share Posted October 6, 2015 It shows me when a user is watching, but doesn't seem to store any of the data about what/when they watched etc. I'm getting this in logs: 2015-09-24 18:51:51 WARNING Unable to retrieve data. Any ideas? As a note, after restarting(?) it now works. No settings were changed Quote Link to comment
ijuarez Posted October 19, 2015 Share Posted October 19, 2015 Recently installed and i can see my media and few basic stats as i just started. However pushbullet is configured but im not getting any notifications when media is played or paused. I do knot see anything in the logs. Any suggestions would be appreciated. Same thing happening here. Tried Pushbullet and NMA and neither sends out notifications. Any ideas? Should have noticed the bell icon at the notification agent settings page to the left of the service. Once I set which notifications I wanted the came right through. my bad I have the bell checked and still get no pushbullet notifications. However all my unraid couch and sickrage get to me just fine. After lastes update push bullet works now. Quote Link to comment
jude Posted November 10, 2015 Share Posted November 10, 2015 I am having some trouble getting this to install. I can handle installing Docker containers from templates. But as this doesn't have a template I am stuck. What are the required steps to add this container? Thanks Quote Link to comment
smdion Posted November 10, 2015 Share Posted November 10, 2015 I am having some trouble getting this to install. I can handle installing Docker containers from templates. But as this doesn't have a template I am stuck. What are the required steps to add this container? Thanks If you do a search for plexpy in Community Apps, this does show up Quote Link to comment
jude Posted November 10, 2015 Share Posted November 10, 2015 I am having some trouble getting this to install. I can handle installing Docker containers from templates. But as this doesn't have a template I am stuck. What are the required steps to add this container? Thanks If you do a search for plexpy in Community Apps, this does show up Thanks, found it! https://github.com/linuxserver/docker-templates Quote Link to comment
SmallwoodDR82 Posted November 12, 2015 Share Posted November 12, 2015 Thank you so much for this docker! Works perfectly and import from plexwatch db works as well! Any chance we can add the option in the docker so we can choose dev branch from github for plexpy? Thanks again! Quote Link to comment
smoldersonline Posted November 28, 2015 Share Posted November 28, 2015 Awesome - thanks a lot for this one! I would be grateful for some pointers on how to import my PlexWatch db. Do I need to set that up in the docker Volume Mappings? Thanks again! edit: This is driving me nuts. plexWatch is at 0.3.2. This is in my Docker configuration. edit 2: I added /mnt to the Volume Mapping (trail & error) and import worked. I'm clueless .... Quote Link to comment
Gog Posted December 23, 2015 Share Posted December 23, 2015 I had to change IP on my unraid server today and when reinitializing the docker, I get this: root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name="plexpy" --net="bridge" -e PUID="99" -e PGID="100" -e TZ="America/New_York" -p 8181:8181/tcp -v "/mnt/cache/cache_only/appdata/plexmediaserver/Library/Application Support/Plex Media Server/Logs/":"/logs":ro -v "/mnt/cache/cache_only/appdata/plexpy/":"/config":rw linuxserver/plexpy 63ff9224a207c2dd8a5e0e0f2bcab0d09ae54c33ce8dfb88acf710596ac3d21d Error response from daemon: Cannot start container 63ff9224a207c2dd8a5e0e0f2bcab0d09ae54c33ce8dfb88acf710596ac3d21d: Error starting userland proxy: listen tcp 192.168.1.74:8181: bind: cannot assign requested address The command failed. 192.168.1.74 is the old IP. I don't think this is specifically a plexpy issue but I'm starting here. I reinstalled the docker, I wiped my config directory, nothing changed. I grepped for that IP in my config directory and in the dockerman directory, no hit. Where is that IP coming from? Quote Link to comment
Gog Posted December 23, 2015 Share Posted December 23, 2015 found it: /boot/config/docker.cfg Quote Link to comment
Medwynd Posted December 25, 2015 Share Posted December 25, 2015 I have been looking for a way to get plex statistics, such as who has watched what, etc and this looks like a good solution but i have a bunch of questions before I install this. I am using the limetech docker of PMS. [*]What is the difference between this and plex watch? Are they required to be installed together? I'm pretty confused because it looked like some people were running both. [*]What does installing plexpy as privileged do? My PMS docker is checked to be privileged. [*]I'm not sure what the path to my plex logs are. As I said I am running the limetech docker on my cache drive. [*]This defaults to PUID 99 / PGID 100. I am not sure what the limetech docker runs at except that it is stated that it runs as user 99, which I am assuming is the PUID. What does having a PGID of 100 do? https://lime-technology.com/forum/index.php?topic=41562.0 Quote Link to comment
bombz Posted January 8, 2016 Share Posted January 8, 2016 Hello, I was trying to find a tool that better monitors plex users on my unraid server. I saw this PlexPy, however, I have no idea how to get it running. Is there perhaps a step by step installation proceedure to follow to get it going. I have never used the docker etc, so I am curious to how it all works. I wish Plex along gave more options to disable users on the fly, and or track bandwidth within the server app. If anyone feels like they can assist me with this , it would be kind of you. Thanks again Quote Link to comment
Gog Posted January 11, 2016 Share Posted January 11, 2016 Hi Bombz I love how PlexPy presents the data. it's only monitoring though. I believe Plex has a beta version out there with bandwidth control but I haven't really looked into it. First step is to get the docker running. See the Wiki here: http://lime-technology.com/wiki/index.php/UnRAID_6/Docker_Management You should be using a cache drive with "cache-only" settings for this but if you run plex you're probably played with this already. Second, you need a way to find the correct docker. I strongly recommend installing the "community applications" plugin here: http://lime-technology.com/forum/index.php?topic=40262.0 Search for plexpy in the "app store" and add the docker. You will need to create a config directory for your new plexPy docker and point plexpy to your plex log directory. It's pretty straightforward once you're in the docker creation page but I can paste a screenshot if you need it. Good luck and enjoy Quote Link to comment
alig26 Posted January 20, 2016 Share Posted January 20, 2016 Hi, I just installed this and followed the instructions, but in the docker log, all it says is: We are now refreshing packages from apt repositorys, this *may* take a while I've left it running for an hour and no change. When I try to connect to the docker via the web, no surprise I get a connection Refused. I deleted it and tried it again and the same thing. Can anyone point me in the right direction to troubleshoot this? Thanks Quote Link to comment
CHBMB Posted January 20, 2016 Share Posted January 20, 2016 Hi, I just installed this and followed the instructions, but in the docker log, all it says is: We are now refreshing packages from apt repositorys, this *may* take a while I've left it running for an hour and no change. When I try to connect to the docker via the web, no surprise I get a connection Refused. I deleted it and tried it again and the same thing. Can anyone point me in the right direction to troubleshoot this? Thanks The docker container pulls the packages required from the Ubuntu repositories, sometimes the mirrors are a bit dodgy and fail.. We know about the problem and have been looking at solutions, but at the moment all we can advise it to try again later. If you've stopped and started the container, it's probably worthwhile deleting the appdata folder for plexpy and the container before trying again. Quote Link to comment
alig26 Posted January 20, 2016 Share Posted January 20, 2016 Okay thank you very much for the info. I'll keep trying. Quote Link to comment
rix Posted February 21, 2016 Share Posted February 21, 2016 A newer version is available. You're 52 commits behind. Please update the container Quote Link to comment
lonix Posted February 21, 2016 Share Posted February 21, 2016 A newer version is available. You're 52 commits behind. Please update the container please reboot the container Quote Link to comment
StanC Posted March 5, 2016 Share Posted March 5, 2016 Just updated the container after upgrading unRAID from v6.1.8 to v6.1.9 and now it has disappeared. No longer showing as installed or running. Quote Link to comment
CHBMB Posted March 5, 2016 Share Posted March 5, 2016 Just updated the container after upgrading unRAID from v6.1.8 to v6.1.9 and now it has disappeared. No longer showing as installed or running. Sounds more like a problem with docker service than an individual plexpy problem tbh. Switch the docker tab to advanced. Delete any orphan containers and make sure docker.img isn't full. Quote Link to comment
Bjonness406 Posted March 5, 2016 Share Posted March 5, 2016 Just updated the container after upgrading unRAID from v6.1.8 to v6.1.9 and now it has disappeared. No longer showing as installed or running. Do you have any spaces in the volume mappings? I am having a problem with this, could be v6.1.9 error? Try to add the image again from "Templates-user" Quote Link to comment
StanC Posted March 5, 2016 Share Posted March 5, 2016 Just updated the container after upgrading unRAID from v6.1.8 to v6.1.9 and now it has disappeared. No longer showing as installed or running. Sounds more like a problem with docker service than an individual plexpy problem tbh. Switch the docker tab to advanced. Delete any orphan containers and make sure docker.img isn't full. Just updated the container after upgrading unRAID from v6.1.8 to v6.1.9 and now it has disappeared. No longer showing as installed or running. Do you have any spaces in the volume mappings? I am having a problem with this, could be v6.1.9 error? Try to add the image again from "Templates-user" Did all that and the image keeps coming up as orphaned. Rolled back to 6.1.8 and re-installed the docker and now everything is fine. Lost all of my stats though :'( Checked my docker backups and I did have a backup - turned out I lost a weeks worth of stats I will need to change my back plan to do nightly backups of the docker images. Quote Link to comment
mattcoughlin Posted March 8, 2016 Share Posted March 8, 2016 I cannot get the program to install. I have had a few issues since upgrading to 6.1.9, but wasn't able to install it on 6.1.8 either. Currently on 6.1.9 when i try to install it i get an orphaned image every time! anyone have any input? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.