Jump to content

[Support] binhex - DelugeVPN

binhex

By binhex
in Docker Containers

Recommended Posts

Recommended

Posted by binhex,

There has been an issue raised on GitHub related to tracker announce request IP leakage under certain circumstances, after careful review of iptables i have tightened up the rules to prevent this. A new image has now been rolled out for all vpn enabled docker images (25th Feb 2021) i produce with the fix in place, i would encourage everyone to update to the recently created 'latest' tagged image.   You can force the upgrade by toggling 'basic view' to 'advanced view' and then clicking on
Recommended by binhex
  • Thanks
  • Like

8 reactions

Go to this post
Recommended

Posted by Ryanoc3ros,

Found the solution on reddit.   Due to the recent change in the authentication process, using your email and password for the manual connection method will no longer work. You will need to use the service credentials instead. You can find your service credentials by following these steps: Please log in to your Nord Account by following this link: https://my.nordaccount.com/dashboard/nordvpn/ Click on the NordVPN tab on the left panel which is under the Services tab.

NordVPN authentication issues - Solution

Recommended by binhex

  • Upvote
  • Thanks
  • Like

13 reactions

Go to this post
frcouture Noob

frcouture

Posted
Posted

Hello,

 

I'm trying to open the WebUI but I can't get it to work.  I have configured deluge vpn as per the Space Invader one video.  Deluge vpn container start just fine but I can't open WebUI.

 

I tried to delete the container and re-install without succes.  If I disable the VPN_ENABLE key in the config I can get to WebUI.

 

I have attached the log.  Anyone can help please?

supervisord.log

Link to comment
  • Replies 10.3k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Ryanoc3ros
Ryanoc3ros

Found the solution on reddit.   Due to the recent change in the authentication process, using your email and password for the manual connection method will no longer work. You will need to u

Dad_Rage
Dad_Rage

I wanted to summarize how I got Mullvad working with DelugeVPN as I had to piece together several "solutions" from different comments in this thread and there was some incorrect info; likely old.

binhex
binhex

OK guys, multi remote endpoint support is now in for this image please pull down the new image (this change will be rolled out to all my vpn images shortly).   What this means is that the im

Posted Images

strike Collaborator

strike

Posted
Posted
1 hour ago, jontron said:

supervisord.log 94.52 kB · 0 downloads

 

Alright, I followed the docker help process so hopefully I did it correctly.

I updated Unraid from 6.9.X to 6.11.5 and now delugevpn is not allowing me to view the WebGUI.

Any help would be greatly appreciated!

Try to delete the perms.txt in your appdata and restart the container. Post a new log if you can't get to the webui. 

Link to comment
strike Collaborator

strike

Posted
Posted
7 hours ago, frcouture said:

Hello,

 

I'm trying to open the WebUI but I can't get it to work.  I have configured deluge vpn as per the Space Invader one video.  Deluge vpn container start just fine but I can't open WebUI.

 

I tried to delete the container and re-install without succes.  If I disable the VPN_ENABLE key in the config I can get to WebUI.

 

I have attached the log.  Anyone can help please?

supervisord.log 487.46 kB · 2 downloads

This seems to be your issue:

  

2023-02-13 08:56:48 VERIFY ERROR: depth=0, error=CA signature digest algorithm too weak: C=US, ST=VPN, L=VPN, O=VPN, OU=VPN, CN=VPN, name=VPN, emailAddress=VPN, serial=1
2023-02-13 08:56:48 OpenSSL: error:0A000086:SSL routines::certificate verify failed

2023-02-13 08:56:48,838 DEBG 'start-script' stdout output:
2023-02-13 08:56:48 TLS_ERROR: BIO read tls_read_plaintext error
2023-02-13 08:56:48 TLS Error: TLS object -> incoming plaintext read error
2023-02-13 08:56:48 TLS Error: TLS handshake failed

It looks like your vpn provider is issuing a week cert, you need to get a updated one from your vpn provider.

Link to comment
Ryan Soler Noob

Ryan Soler

Posted
Posted (edited)

Suddenly having an issue with delugevpn. 
Checked the logs and it just replays this message over and over again. 

 

[info] Starting OpenVPN (non daemonised)...

2023-02-13 21:28:25,699 DEBG 'start-script' stdout output:

Options error: Unrecognized option or missing or extra parameter(s) in /config/openvpn/openvpn.ovpn:13: ncp-disable (2.6.0)


Worked fine until I updated the ubuntu server it's running on. 
Ubuntu server is running portainer 2.17.0 CE, with binhex/arch-delugevpn:latest running on it as a docker. 
I'm using cyberghost as the VPN Provider. 
it's worked fine until now. 

Any ideas?

Edited by Ryan Soler
Link to comment
strike Collaborator

strike

Posted
Posted
1 minute ago, Ryan Soler said:

Suddenly having an issue with delugevpn. 
Checked the logs and it just replays this message over and over again. 

 

[info] Starting OpenVPN (non daemonised)...

2023-02-13 21:28:25,699 DEBG 'start-script' stdout output:

Options error: Unrecognized option or missing or extra parameter(s) in /config/openvpn/openvpn.ovpn:13: ncp-disable (2.6.0)


Worked fine until I updated the ubuntu server it's running on. 
Ubuntu server is running portainer 2.17.0 CE, with binhex/arch-delugevpn:latest running on it as a docker. 
I'm using cyberghost as the VPN Provider. 
it's worked fine until now. 

Any ideas?

Remove "ncp-disable" from your .ovpn file and retart the container.

  • Like 1
Link to comment
strike Collaborator

strike

Posted
Posted

  

1 minute ago, jontron said:

Trying to delete but it never does. Used Windows but it won't let me due to permissions. Tried Krusader but no dice there either.

Do you know how to use the command line? Or Midnight Commander? Just ssh into your server or click the terminal in the unraid webui. type mc and hit enter. Navigate to the appdata folder and delete it from there.

Link to comment
jontron Noob

jontron

Posted
Posted
10 minutes ago, strike said:

  

Do you know how to use the command line? Or Midnight Commander? Just ssh into your server or click the terminal in the unraid webui. type mc and hit enter. Navigate to the appdata folder and delete it from there.

Got it with MC. Really cool, never knew about that before.

 

Deleting Perms fixed it. Thank you!!!!

Link to comment
jontron Noob

jontron

Posted
Posted
1 hour ago, strike said:

  

Do you know how to use the command line? Or Midnight Commander? Just ssh into your server or click the terminal in the unraid webui. type mc and hit enter. Navigate to the appdata folder and delete it from there.

So deluge is good. But just checked my arrs that are routing through it and they aren't visible

Link to comment
strike Collaborator

strike

Posted
Posted
8 minutes ago, jontron said:

So deluge is good. But just checked my arrs that are routing through it and they aren't visible

You mean you can't get to the webui of the arrs? Has it been a while since you updated delugevpn? There was some changes some time ago when routing other apps through a vpn app. Do you have your input and output ports setup according to the faq Q25 and Q27? https://github.com/binhex/documentation/blob/master/docker/faq/vpn.md

Link to comment
jontron Noob

jontron

Posted
Posted
2 minutes ago, strike said:

You mean you can't get to the webui of the arrs? Has it been a while since you updated delugevpn? There was some changes some time ago when routing other apps through a vpn app. Do you have your input and output ports setup according to the faq Q25 and Q27? https://github.com/binhex/documentation/blob/master/docker/faq/vpn.md

I just looked through the logs and it's a permissions issue. I'll start looking around to see if someone has already found the fix. Thanks!

Link to comment
strike Collaborator

strike

Posted
Posted
Just now, jontron said:

I just looked through the logs and it's a permissions issue. I'll start looking around to see if someone has already found the fix. Thanks!

Ok, Yeah a lot of users had permission issues when updating to 6.11 due to not using the correct setup. If you have the arrs running on another uid/gid other then 99/100 you need to change it back to the standard 99/100. And make sure the right permission are set in the settings of the arrs. After doing that you might need to run the new (docker safe) perms script found under tools in the unraid webui on you shares to fix permission issues.  

Link to comment
headnoodle Noob

headnoodle

Posted
Posted

Not sure if this has been asked before but cannot find it when searching the thread, so apologies up front if it is there an I missed it.

 

I have installed the docker instance of this in unraid and all works fine with the vpn file entered etc.  My problem is that when I change the docker instance to use a fixed IP address it doesn't allow me to load the page.  It looks find based on the logs, nothing untoward listed.  If I turn of vpn then it works fine on the fixed IP

 

Any help would be appreciated...... :)

Link to comment
Lamkam Noob

Lamkam

Posted
Posted

Since last image update of today, it's failing. Looks like its looping and restarting constantly. Logs do not show anything useful.

 

Havent changed any settings or anything since ages for this container, and was always working fine. Any ideas?

 

Created by...
___.   .__       .__
\_ |__ |__| ____ |  |__   ____ ___  ___
 | __ \|  |/    \|  |  \_/ __ \\  \/  /
 | \_\ \  |   |  \   Y  \  ___/ >    <
 |___  /__|___|  /___|  /\___  >__/\_ \
     \/        \/     \/     \/      \/
   https://hub.docker.com/u/binhex/
2023-02-14 18:51:34.371998 [info] System information Linux 4bd397d513e9 5.15.0-60-generic #66~20.04.1-Ubuntu SMP Wed Jan 25 09:41:30 UTC 2023 x86_64 GNU/Linux
2023-02-14 18:51:34.395934 [info] OS_ARCH defined as 'x86-64'
2023-02-14 18:51:34.416313 [info] PUID defined as '1000'
2023-02-14 18:51:34.443650 [info] PGID defined as '1000'
2023-02-14 18:51:34.479826 [info] UMASK defined as '000'
2023-02-14 18:51:34.500000 [info] Permissions already set for '/config'
2023-02-14 18:51:34.524385 [info] Deleting files in /tmp (non recursive)...
2023-02-14 18:51:34.550638 [info] VPN_ENABLED defined as 'yes'
2023-02-14 18:51:34.572721 [info] VPN_CLIENT defined as 'openvpn'
2023-02-14 18:51:34.597115 [info] VPN_PROV defined as 'airvpn'
2023-02-14 18:51:34.623935 [info] OpenVPN config file (ovpn extension) is located at /config/openvpn/AirVPN_Netherlands_UDP-443.ovpn
2023-02-14 18:51:34.676341 [info] VPN remote server(s) defined as 'nl.vpn.airdns.org,'
2023-02-14 18:51:34.693537 [info] VPN remote port(s) defined as '443,'
2023-02-14 18:51:34.711049 [info] VPN remote protcol(s) defined as 'udp,'
2023-02-14 18:51:34.736628 [info] VPN_DEVICE_TYPE defined as 'tun0'
2023-02-14 18:51:34.757510 [info] VPN_OPTIONS not defined (via -e VPN_OPTIONS)
2023-02-14 18:51:34.901110 [debug] DNS operational, we can resolve name 'nl.vpn.airdns.org' to address '213.152.162.148'
Created by...
___.   .__       .__
\_ |__ |__| ____ |  |__   ____ ___  ___
 | __ \|  |/    \|  |  \_/ __ \\  \/  /
 | \_\ \  |   |  \   Y  \  ___/ >    <
 |___  /__|___|  /___|  /\___  >__/\_ \
     \/        \/     \/     \/      \/
   https://hub.docker.com/u/binhex/
2023-02-14 18:52:35.278009 [info] System information Linux 4bd397d513e9 5.15.0-60-generic #66~20.04.1-Ubuntu SMP Wed Jan 25 09:41:30 UTC 2023 x86_64 GNU/Linux
2023-02-14 18:52:35.302738 [info] OS_ARCH defined as 'x86-64'
2023-02-14 18:52:35.323116 [info] PUID defined as '1000'
2023-02-14 18:52:35.349231 [info] PGID defined as '1000'
2023-02-14 18:52:35.385817 [info] UMASK defined as '000'
2023-02-14 18:52:35.410273 [info] Permissions already set for '/config'
2023-02-14 18:52:35.430875 [info] Deleting files in /tmp (non recursive)...
2023-02-14 18:52:35.459583 [info] VPN_ENABLED defined as 'yes'
2023-02-14 18:52:35.485748 [info] VPN_CLIENT defined as 'openvpn'
2023-02-14 18:52:35.509858 [info] VPN_PROV defined as 'airvpn'
2023-02-14 18:52:35.535714 [info] OpenVPN config file (ovpn extension) is located at /config/openvpn/AirVPN_Netherlands_UDP-443.ovpn
2023-02-14 18:52:35.585318 [info] VPN remote server(s) defined as 'nl.vpn.airdns.org,'
2023-02-14 18:52:35.610432 [info] VPN remote port(s) defined as '443,'
2023-02-14 18:52:35.628152 [info] VPN remote protcol(s) defined as 'udp,'
2023-02-14 18:52:35.653142 [info] VPN_DEVICE_TYPE defined as 'tun0'
2023-02-14 18:52:35.673416 [info] VPN_OPTIONS not defined (via -e VPN_OPTIONS)
2023-02-14 18:52:35.715358 [debug] DNS operational, we can resolve name 'nl.vpn.airdns.org' to address '213.152.161.68'

Link to comment
strike Collaborator

strike

Posted
Posted
7 hours ago, headnoodle said:

Not sure if this has been asked before but cannot find it when searching the thread, so apologies up front if it is there an I missed it.

 

I have installed the docker instance of this in unraid and all works fine with the vpn file entered etc.  My problem is that when I change the docker instance to use a fixed IP address it doesn't allow me to load the page.  It looks find based on the logs, nothing untoward listed.  If I turn of vpn then it works fine on the fixed IP

 

Any help would be appreciated...... :)

https://forums.unraid.net/topic/44109-support-binhex-delugevpn/?do=findComment&comment=1223362

 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
Go to topic listing
×
×
  • Create New...