Uleepera Posted March 30, 2023 Share Posted March 30, 2023 (edited) Please point me to where the device profiles within this release are. Unfortunately, I need help finding them based on the plex documentation. Edited March 30, 2023 by Uleepera Quote Link to comment
Uleepera Posted March 30, 2023 Share Posted March 30, 2023 7 hours ago, Bill_Hickman said: I just updated Plex container an hour or two ago, now my docker will not start, and if I start it manually, it starts but then stops. This has not been a problem until the last update. Anyone have an idea why? Binhex plex-pass is my docker.... Bill Did you pull the log on Unraid when you tried to start it? If so see what the error messages are. That would likely help identify the issue. Quote Link to comment
sonisame Posted April 9, 2023 Share Posted April 9, 2023 Hi, Need little help! I posted here too I cant get PLEX DLNA to work, I have it set as Host mode and DLNA enabled in Plex settings, No matter what I do, I cant see Plex DLNA on my windows PC(s) or Oculas VR headsets. Quote Link to comment
droopie Posted April 9, 2023 Share Posted April 9, 2023 2 hours ago, sonisame said: Hi, Need little help! I posted here too I cant get PLEX DLNA to work, I have it set as Host mode and DLNA enabled in Plex settings, No matter what I do, I cant see Plex DLNA on my windows PC(s) or Oculas VR headsets. i wasnt able to get any help on discord, reddit, or here for this. i was only told that i needed to forward all the ports from plex. its a big list of ports that i enabled in my router but it did not help. the only way to see dlna is to change out of the custom network but then it breaks all the apps that connect to plex. 1 Quote Link to comment
Gex2501 Posted April 15, 2023 Share Posted April 15, 2023 Did something change with Plex? I'm trying to setup a new plex docker, totally fresh. I can't find the part where you claim the server anymore. It's like it isn't even running. Logs look normal as far as I know. I'm must be doing something dumb. I'm having issues with both the plex and plexpass dockers as well as the offical one. Is there some new/special way to claim the server? The webui seems to just redirect me to the plex online content with no server. Quote Link to comment
Gex2501 Posted April 15, 2023 Share Posted April 15, 2023 36 minutes ago, Gex2501 said: Did something change with Plex? I'm trying to setup a new plex docker, totally fresh. I can't find the part where you claim the server anymore. It's like it isn't even running. Logs look normal as far as I know. I'm must be doing something dumb. I'm having issues with both the plex and plexpass dockers as well as the offical one. Is there some new/special way to claim the server? The webui seems to just redirect me to the plex online content with no server. I managed to claim my server, but boy was it weird. Following the instructions for the post linked below I ran the curl command at the console inside the docker. After that I was able to access the webui and do the setup. I'm guessing you have to use claim tokens for new servers now? IDK... https://forums.unraid.net/topic/44141-support-binhex-plex/?do=findComment&comment=1163092 Quote Link to comment
Gex2501 Posted April 21, 2023 Share Posted April 21, 2023 I'm sorry if this has been asked before but I can't seem to find an answer...Is there a way to disable the internal update check that plex media server does? We obviously only want to update by using the docker container right? Quote Link to comment
binhex Posted April 21, 2023 Author Share Posted April 21, 2023 3 hours ago, Gex2501 said: .Is there a way to disable the internal update check that plex media server does? not that i know of, no. 3 hours ago, Gex2501 said: We obviously only want to update by using the docker container right? correct Quote Link to comment
Gex2501 Posted April 22, 2023 Share Posted April 22, 2023 Any idea what IP or URL Plex uses to check for updates? Maybe it can be blocked by the router/firewall...but hopefully not block other Plex services. Quote Link to comment
binhex Posted April 22, 2023 Author Share Posted April 22, 2023 Any idea what IP or URL Plex uses to check for updates? Maybe it can be blocked by the router/firewall...but hopefully not block other Plex services.Nope no idea, tbh I really wouldn't worry about it, if someone in your family screws up and presses the update button in the Plex ui, then simply left click container, edit something, set it back to what it was and click apply and you are back to working.Sent from my 22021211RG using Tapatalk Quote Link to comment
macros the black Posted April 23, 2023 Share Posted April 23, 2023 Ever since the April 20, 2023 update plex is no longer working. Any in sites. I’ve attached the log. -usr-local-emhttp-webGui-scripts-run_cmd docker logs -f -n 90 binhex-plex (viki).pdf Quote Link to comment
Almerish Posted April 24, 2023 Share Posted April 24, 2023 Not 100% sure if this is a plex issue but seems to be stemming from plex. Starting about 2 months ago or so if I attempt to use subtitles while watching anything from my server through plex the entire server will crash. I have figured out this appears to only be the case if streaming from original quality. If I have it being transcoded down this is not an issue. I am unsure how to get logs of this happening since the logs seem to reset when the server reboots (this is most likely ignorance on my part in how to save logs). Any help in figuring this out would be greatly appreciated since I haven't been able to figure it out on my own for a while now. Quote Link to comment
ibasaw Posted April 27, 2023 Share Posted April 27, 2023 (edited) hi i can't update some music files since a few days, i don't know if this is related to this https://forums.plex.tv/t/stopped-adding-new-files/836924/37 it works with jellyfin, so this is not my files, my naming strategy is the same as others albums, my tags are good in plex server, theses directories are "empty" !? i got this in the console 2023-04-27 19:36:03,413 DEBG 'plexmediaserver' stdout output: Critical: libusb_init failed Edited April 27, 2023 by ibasaw Quote Link to comment
brian.cline2 Posted April 28, 2023 Share Posted April 28, 2023 Network types question..... I have sab and nzbget for downloading usenet isos. I have my main NIC on my host routed through my Unifi UDMP to connect to a NORD VPN interface. Works perfectly. I have a second NIC bridged and Plex is using that to get and keep a remote connection. I know I'd prefer to leave plex as host, but I can't get it to work properly and the remote connection will not succeed if I don't do it this currently. I'd scoured the internet trying to figure out VLAN'ing with UnRaid, tried multiple things; one nic, two nics, one nic with vlans, about everything I know how and I'm lost. I found a forum post about multiple networks for a container, but unfortunately it didn't work. Plex actually seemed to attach to the post argument field and not the network type listed. Is this supported? Basically what I'd like to do is have a network connection to a custom network with all my other containers (overseerr / sonarr / radarr / etc) that is ran through my Nord VPN host connection, but also have a separate connection with unrestricted access so I can connect to Plex remotely. Any guidance is appreciated as I'm lost on next steps here. Quote Link to comment
ibasaw Posted April 28, 2023 Share Posted April 28, 2023 23 hours ago, ibasaw said: hi i can't update some music files since a few days, i don't know if this is related to this https://forums.plex.tv/t/stopped-adding-new-files/836924/37 it works with jellyfin, so this is not my files, my naming strategy is the same as others albums, my tags are good in plex server, theses directories are "empty" !? i got this in the console 2023-04-27 19:36:03,413 DEBG 'plexmediaserver' stdout output: Critical: libusb_init failed my issue with scan is resolved, i change the agent for music, and he finally get it, but how to solve the libusb_init failed ? Quote Link to comment
binhex Posted April 29, 2023 Author Share Posted April 29, 2023 my issue with scan is resolved, i change the agent for music, and he finally get it, but how to solve the libusb_init failed ?Ignore it, it's a non issueSent from my 22021211RG using Tapatalk 1 Quote Link to comment
macros the black Posted May 5, 2023 Share Posted May 5, 2023 On 4/22/2023 at 10:22 PM, macros the black said: Ever since the April 20, 2023 update plex is no longer working. Any in sites. I’ve attached the log. -usr-local-emhttp-webGui-scripts-run_cmd docker logs -f -n 90 binhex-plex (viki).pdf 556.79 kB · 1 download I guess I will just give up on this and use a different docker. Quote Link to comment
binhex Posted May 6, 2023 Author Share Posted May 6, 2023 9 hours ago, macros the black said: I guess I will just give up on this and use a different docker. probably Q4 but hard to tell from that pdf:- https://github.com/binhex/documentation/blob/master/docker/faq/plex.md Quote Link to comment
dent1337 Posted May 10, 2023 Share Posted May 10, 2023 (edited) Hello, Docker has been working great without hiccups. However GPU transcoding is not working anymore, worked flawless before, but i swapped mb, cpu and memory to get my LSI 9300i card to work, due to PCIE lanes limitation on my old system. I am running Latest: v530.41.03 nvidia driver. I cheked so i have correct GPU ID, --runtime=nvidia and value it set to all. I have literally not changed anything software wise other than regular updates. Go to Community Applications in the unRAID web ui and search for Plugin 'Nvidia Driver' and install it, then reboot host. Go to unRAID web ui/Plugins/Nvidia Driver and make a note of the GPU device, it should look something like this:- GPU-02ff3633-4f22-c4d6-2c15-654ff33a321e Go to unRAID web ui/Docker tab/left click Plex container and select 'edit'. Click on the toggle for 'advanced view'. Go to 'Extra Parameters:' and set it to --runtime=nvidia Go to variable named 'NVIDIA_DRIVER_CAPABILITIES' and set the value to all Go to variable named 'NVIDIA_VISIBLE_DEVICES' and set the value to the GPU device found in step 2. Start Plex container. SOLVED: For some reason it's not supported on chrome on IOS, where i usually test,. faster than using the app Edited May 10, 2023 by dent1337 Quote Link to comment
Gex2501 Posted May 11, 2023 Share Posted May 11, 2023 So I've managed to successfully get plex working via reverse proxy with swag and authelia. But now I can't access it from the local network, only the reverse proxy. I've noticed before the network type is set to host by default, and if I made it bridge there would be no access to plex. To make it work with swag I have the network type set to a custom network. I assume this is why I can't access via local IP address anymore. But why? As a second issue, I'm trying to figure out how to make remote access work through the swag reverse proxy. Can you help at all with this? Quote Link to comment
JBanner Posted May 11, 2023 Share Posted May 11, 2023 Really Sorry, but at wits end.... I have had a look at quite a few topics here but cant find my problem. I am getting a message "Database Corrupted" from the Plex clients. Everything seems to be working but i'd like to try and fix this before it gest worse. I have tried to follow spaceInvaders video but I must be doing something wrong, I've also tried to follow some instructions on Reddit but again I get nowhere.... Sorry to be such a noob, but can someone point me in the right dirrection please. Quote Link to comment
binhex Posted May 11, 2023 Author Share Posted May 11, 2023 5 hours ago, JBanner said: Really Sorry, but at wits end.... I have had a look at quite a few topics here but cant find my problem. I am getting a message "Database Corrupted" from the Plex clients. Everything seems to be working but i'd like to try and fix this before it gest worse. I have tried to follow spaceInvaders video but I must be doing something wrong, I've also tried to follow some instructions on Reddit but again I get nowhere.... Sorry to be such a noob, but can someone point me in the right dirrection please. Plex database corruption is sadly quite common, so no worries about asking for help, your options are (in descending best order):- 1. Restore the Plex database from CA backup and restore (plugin) 2. Use the database backups from Plex built-in Scheduler to roll back - see https://support.plex.tv/articles/202485658-restore-a-database-backed-up-via-scheduled-tasks/ 3. Repair the database ** ** I have written a bash script that attempts to make the procedure for repairing SQLite databases more user friendly, its based off this article:- https://support.plex.tv/articles/repair-a-corrupted-database/ If you wish to give the script a go then please let me know and I will show you how to use it. Quote Link to comment
JBanner Posted May 11, 2023 Share Posted May 11, 2023 Thanks I've successfully restored from a week old backup, so no big loss. 1 Quote Link to comment
planetwilson Posted May 20, 2023 Share Posted May 20, 2023 (edited) My Plex has started erroring with this:- 2023-05-20 10:03:47,233 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 23098522090320 for <Subprocess at 23098509334544 with name plexmediaserver in state STARTING> (stdout)> 2023-05-20 10:03:47,233 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 23098519824720 for <Subprocess at 23098509334544 with name plexmediaserver in state STARTING> (stderr)> 2023-05-20 10:03:47,233 WARN exited: plexmediaserver (exit status 255; not expected) 2023-05-20 10:03:47,233 DEBG received SIGCHLD indicating a child quit 2023-05-20 10:03:50,239 INFO spawned: 'plexmediaserver' with pid 156 2023-05-20 10:03:50,471 DEBG 'plexmediaserver' stdout output: Error: Unable to set up server: sqlite3_statement_backend::prepare: no such table: metadata_agent_providers for SQL: update metadata_agent_providers set online = 0 (N4soci10soci_errorE) 2023-05-20 10:03:50,473 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 23098509157776 for <Subprocess at 23098509334544 with name plexmediaserver in state STARTING> (stdout)> 2023-05-20 10:03:50,474 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 23098507118928 for <Subprocess at 23098509334544 with name plexmediaserver in state STARTING> (stderr)> 2023-05-20 10:03:50,474 WARN exited: plexmediaserver (exit status 255; not expected) 2023-05-20 10:03:50,474 DEBG received SIGCHLD indicating a child quit 2023-05-20 10:03:51,474 INFO gave up: plexmediaserver entered FATAL state, too many start retries too quickly I have tried replacing it with the database/blob backup it takes itself all the way back to two weeks but same error. Plex was working fine the day before yesterday so I am not quite sure what is going on if those backups don't work either. UPDATE: I have replaced my DB files from a week ago and pulled the older version :1.32.0.6950-1-01 and I am back up and running. No idea what has caused it but will wait a couple of weeks before attempting to go latest again. Edited May 20, 2023 by planetwilson Quote Link to comment
EvilTiger Posted May 26, 2023 Share Posted May 26, 2023 Hi all, I'm hoping that this is an easy fix or something i over looked. Either way i appreciate the your time to look at this. I've been running the docker image binhex/arch-plex:latest for many years without issue and i have my docker containers setup to automatically upgrade when there is a new version of the image. At some point over the past several weeks the "latest" build is now failing on start up with the following errors.. Quote __. .__ .__ \_ |__ |__| ____ | |__ ____ ___ ___ | __ \| |/ \| | \_/ __ \\ \/ / | \_\ \ | | \ Y \ ___/ > < |___ /__|___| /___| /\___ >__/\_ \ \/ \/ \/ \/ \/ https://hub.docker.com/u/binhex/ 2023-05-26 04:07:06.929682 [info] Host is running unRAID 2023-05-26 04:07:06.946819 [info] System information Linux Enterprise 5.19.17-Unraid #2 SMP PREEMPT_DYNAMIC Wed Nov 2 11:54:15 PDT 2022 x86_64 GNU/Linux 2023-05-26 04:07:06.967485 [info] OS_ARCH defined as 'x86-64' 2023-05-26 04:07:06.988413 [info] PUID defined as '99' 2023-05-26 04:07:07.019177 [info] PGID defined as '100' 2023-05-26 04:07:07.054271 [info] UMASK defined as '000' 2023-05-26 04:07:07.075143 [info] Permissions already set for '/config' 2023-05-26 04:07:07.099145 [info] Deleting files in /tmp (non recursive)... 2023-05-26 04:07:07.120933 [info] TRANS_DIR defined as '/dev/shm' 2023-05-26 04:07:07.142859 [info] Starting Supervisor... 2023-05-26 04:07:07,248 INFO Included extra file "/etc/supervisor/conf.d/plexmediaserver.conf" during parsing 2023-05-26 04:07:07,248 INFO Set uid to user 0 succeeded 2023-05-26 04:07:07,250 INFO supervisord started with pid 8 2023-05-26 04:07:08,251 INFO spawned: 'plexmediaserver' with pid 65 2023-05-26 04:07:08,252 INFO reaped unknown pid 9 (exit status 0) 2023-05-26 04:07:09,253 INFO success: plexmediaserver entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2023-05-26 04:07:16,481 DEBG 'plexmediaserver' stdout output: Error: Unable to set up server: sqlite3_statement_backend::prepare: no such table: metadata_agent_providers for SQL: update metadata_agent_providers set online = 0 (N4soci10soci_errorE) 2023-05-26 04:07:16,487 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22873043847952 for <Subprocess at 22873043874576 with name plexmediaserver in state RUNNING> (stdout)> 2023-05-26 04:07:16,487 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22873058713168 for <Subprocess at 22873043874576 with name plexmediaserver in state RUNNING> (stderr)> 2023-05-26 04:07:16,488 WARN exited: plexmediaserver (exit status 255; not expected) 2023-05-26 04:07:16,488 DEBG received SIGCHLD indicating a child quit 2023-05-26 04:07:17,492 INFO spawned: 'plexmediaserver' with pid 93 2023-05-26 04:07:18,494 INFO success: plexmediaserver entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2023-05-26 04:07:26,026 DEBG 'plexmediaserver' stdout output: Error: Unable to set up server: sqlite3_statement_backend::prepare: no such table: metadata_agent_providers for SQL: update metadata_agent_providers set online = 0 (N4soci10soci_errorE) 2023-05-26 04:07:26,033 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22873047228624 for <Subprocess at 22873043874576 with name plexmediaserver in state RUNNING> (stdout)> 2023-05-26 04:07:26,033 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22873041639376 for <Subprocess at 22873043874576 with name plexmediaserver in state RUNNING> (stderr)> 2023-05-26 04:07:26,034 WARN exited: plexmediaserver (exit status 255; not expected) 2023-05- This is the error after which the server stops and it tries to relaunch. Quote Unable to set up server: sqlite3_statement_backend::prepare: no such table: metadata_agent_providers for SQL: update metadata_agent_providers set online = 0 (N4soci10soci_errorE) I've been able to work around this by not using the "latest" docker tag and using this version of the docker image Quote binhex/arch-plex:1.32.0.6973-1-01 So, i'm up and running now but over time this image willl get more out of date. Is anyone else seeing this with the latest image? any pointers to get this resolved would be greatly appreciated. All the best, -Tiger Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.